Orcus is a library that provides a collection of standalone file processing
filters. It is currently focused on providing filters for spreadsheet
documents, but filters for other productivity application types (such as
wordprocessor and presentation) are in consideration.
===> The following configuration options are available for liborcus-0.21.0_3:
STATIC=on: Build static executables and/or libraries
===> Use 'make config' to modify these settings
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner)
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
Bump PORTREVISION for ports depending on the canonical version of GCC
as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3
to GCC 9.1 under most circumstances now after revision 507371.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.
PR: 238330
Bump PORTREVISION for ports depending on the canonical version of GCC
defined via Mk/bsd.default-versions.mk which has moved from GCC 7.4 t
GCC 8.2 under most circumstances.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, as a double check, everything INDEX-11 showed depending on lang/gcc7.
PR: 231590
Add USE_CXXSTD to fixes build on arches using GCC.
Set USES=localbase:ldflags, instead of manually specifying CPPFLAGS
and LDFLAGS.
Tested on powerpc64 (just this port), amd64 (this port plus libreoffice).
PR: 231447
Submitted by: Piotr Kubaj
Approved by: portmgr (tier-2 blanket)
Bump PORTREVISION for ports depending on the canonical version of GCC
in the ports tree (via Mk/bsd.default-versions.mk and lang/gcc) which
has now moved from GCC 6 to GCC 7 by default.
This includes ports
- featuring USE_GCC=yes or USE_GCC=any,
- featuring USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and those
- with USES=compiler specifying one of openmp, nestedfct, c11, c++0x,
c++11-lib, c++11-lang, c++14-lang, c++17-lang, or gcc-c++11-lib.
PR: 222542
Fix port builds for architectures which remain on gcc as the default compiler.
This will primarily help powerpc64.
For archs where clang is the default compiler, these changes will have no
effect, as the base compiler already has these capabilities (primarily, but
not exclusively, c++-11).
Tested for no-harm on amd64.
While here, pet portlint.
Approved by: portmgr (tier-2 blanket)
Bump PORTREVISION for ports depending on the canonical version of GCC
(via Mk/bsd.default-versions.mk and lang/gcc) which has moved from
GCC 5.4 to GCC 6.4 under most circumstances.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c++11-lib, c++11-lang,
c++14-lang, c++0x, c11, or gcc-c++11-lib.
PR: 219275
Mark some ports failing on power64. In cases where the error message
was a stub, provide a real one.
While here, pet portlint.
Approved by: portmgr (tier-2 blanket)
Bump PORTREVISIONs for ports depending on the canonical version of GCC and
lang/gcc which have moved from GCC 4.9.4 to GCC 5.4 (at least under some
circumstances such as versions of FreeBSD or platforms).
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using using Mk/bsd.octave.mk which in turn has USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c++11-lib, c++14-lang,
c++11-lang, c++0x, c11, or gcc-c++11-lib.
PR: 216707
Assume "pkg-config zlib" works after 9.x reached EOL
Many ports passed ZLIB_CFLAGS="-I/usr/include" ZLIB_LIBS="-L/usr/lib -lz"
which is unsafe at least with lang/gcc* that override some system headers
and have newer libgcc_s.so that our old version in base may not be
forward-compatible with.
devel/liborcus: unbreak on 9.x after r425933
In file included from css_types.cpp:9:
../../include/orcus/global.hpp:59:6: error: no type named 'unique_ptr' in
namespace 'std'
std::unique_ptr<T> make_unique(Args&& ...args)
~~~~~^
../../include/orcus/global.hpp:59:16: error: expected unqualified-id
std::unique_ptr<T> make_unique(Args&& ...args)
^
In file included from css_types.cpp:11:
/usr/local/include/mdds-1.2/mdds/global.hpp:91:6: error: no type named
'unique_ptr' in namespace 'std'
std::unique_ptr<T> make_unique(Args&& ...args)
~~~~~^
/usr/local/include/mdds-1.2/mdds/global.hpp:91:16: error: expected
unqualified-id
std::unique_ptr<T> make_unique(Args&& ...args)
^
4 errors generated.
Reported by: pkg-fallout
Convert archivers/libzip to USES=libtool. Bump PORTREVISION on all
dependent ports.
cad/repsnapper:
- Remove excessive dependencies.
- Convert to USES=libtool.
- Set LDFLAGS to fix detection of libintl.
- Use @sample.
databases/mysql-workbench51:
- Remove remnants of former slave ports.
- Convert some LIB_DEPENDS to USE_GNOME.
- Convert to USES=libtool.
- Staging.
databases/mysql-workbench52:
- USES=libtool.
devel/libsigrok:
- USES=libtool.
- INSTALL_TARGET=install-strip.
devel/liborcus:
- USES=libtool tar:bzip2.
This changes almost all the "gnomehack" only USE_GNOME cases to USES= pathfix.
If a port used other USE_GNOME items it was untouched.
The ports that used other USES were fixed by hand.
PR: ports/177081
Reviewed by: bapt
Approved by: portmgr (miwi)
Orcus is a library that provides a collection of standalone file processing
filters. It is currently focused on providing filters for spreadsheet
documents, but filters for other productivity application types (such as
wordprocessor and presentation) are in consideration.
WWW: http://gitorious.org/orcus/
