Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

One more small cleanup, forgotten yesterday.
Reported by:	lwhsu

Remove # $FreeBSD$ from Makefiles.

devel: Add missing USES={gl,gnome,php,sdl}

Grab maintainership of TiLP2+ libraries, they are too important to be orphans.

Update TiLP2+libraries and drop maintainership.

TiLP2 1.18, libticables2 1.3.5, libticalcs2 1.1.9, libticonv 1.1.5, and
libtifiles2 1.1.7

Drop useless dependency on gmake (bmake build those fine)

Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.

With hat:	portmgr
Sponsored by:	Absolight

Enforce libarchive from ports

This reduces the patching level on some ports and make it simpler to maintainer
over all supported version of freebsd

Cleanup plist

- Switch to USES=libtool, drop .la files
- Convert USE_BZIP2 to USES

Approved by:	portmgr blanket

- Support staging.
- New LIB_DEPENDS syntax.
- USES=gmake.
- Options helpers.
- Make the Requires field private in pkgconfig file.

Add NO_STAGE all over the place in preparation for the staging support (cat:
devel part 3)

- Convert USE_GETTEXT to USES (part 4)

Approved by:	portmgr (bapt)

Set MAINTAINER to my @FreeBSD.org address.

Suggested by:	crees

Convert devel to USES=pkgconfig

Update tilp2 and its libraries:
- tilp2 1.17
- libticables2 1.3.4, libticalcs2 1.1.8, libticonv 1.1.4, libtifiles2 1.1.6
- Add NLS option, remove libtool dependency, clean up Makefile and pkg-descr
- Bump PORTREVISION and trim Makefile header for emulators/tilem and
  emulators/tiemu3.

- update converters/libticonv to 1.1.3
- update devel/libtifiles2 to 1.1.5
- update comms/libticables2 to 1.3.3
- update comms/libticalcs2 to 1.1.7
- update comms/tilp2 to 1.16
- bump PORTREVISION for emulators/tiemu3
- add LICENSE (GPLv2)

I did this in single commit because this ports are tightly interconnected,
so chanses are good to (temporarily) broke something, committing them
separatedly.

PR:             164024
Submitted by:   Tijl Coosemans <tijl at coosemans dot org> (maintainer)

- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead

PR:             157936
Submitted by:   myself
Exp-runs by:    pav
Approved by:    pav

Update converters/libticonv to 1.1.2 [1]
Update comms/libticables2 to 1.3.2 [2]
Update devel/libtifiles2 to 1.1.4 [3]
Update comms/libticalcs2 to 1.1.6 [4]
Update comms/tilp2 to 1.15 [5]
Bump emulators/tiemu3 [6]

PR:             ports/157837 [1], ports/157832 [2], ports/157830 [3],
ports/157836 [4], ports/157838 [5], ports/157839 [6]
Submitted by:   Tijl Coosemans <tijl@coosemans.org> [1] [2] [3] [4] [5]
(maintainer) [6]
Approved by:    Naram Qashat <cyberbotx@cyberbotx.com> (maintainer) [6], bapt
(mentor)

Sync to new bsd.autotools.mk

Update to 1.1.3

PR:             ports/148014
Submitted by:   Tijl Coosemans (maintainer)

Bounce PORTREVISION for gettext-related ports.  Have fun, ya'll.

- Update maintainer's email
- Fix some pkg-descrs
- Update some MASTER_SITES

PR:             140966
Submitted by:   Tijl Coosemans <tijl@coosemans.org> (maintainer from new email)
Approved by:    portmgr (miwi)

- Switch SourceForge ports to the new File Release System: categories starting
with D

-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.

It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.

With help:      marcus and kwm
Pointyhat-exp:  a few times by pav
Tested by:      pgollucci, "Romain Tartière" <romain@blogreen.org>, and
                a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by:    marcus
Approved by:    portmgr

- Update to 1.1.1

PR:             ports/131139
Submitted by:   Tijl Coosemans <tijl@ulyssis.org> (maintainer)

Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)

- Update to 1.1.0

PR:             119749
Submitted by:   Naram Qashat <cyberbotx@cyberbotx.com>
Approved by:    maintainer

- Update to 1.0.7.

PR:             ports/115971
Submitted by:   Tijl Coosemans <tijl@ulyssis.org> (maintainer)
Approved by:    stas (mentor)

- Update to 1.0.5.

PR:             ports/115490
Submitted by:   Naram Qashat <cyberbotx@cyberbotx.com>
Approved by:    itetcu (mentor), Tijl Coosemans <tijl@ulyssis.org> (maintainer)

- Update to 1.0.3

PR:             ports/109291
Submitted by:   Tijl Coosemans <tijl at ulyssis.org> (maintainer)

- Update to 1.0.1

PR:             ports/106689
Submitted by:   Tijl Coosemans <tijl at ulyssis.org> (maintainer)

The tifiles library is a library to handle the various TI calculator
file formats.

WWW: http://tilp.info/

- Tijl Coosemans
tijl@ulyssis.org

PR:             ports/104410
Submitted by:   Tijl Coosemans <tijl at ulyssis.org>