Port details |
- p5-File-Random Perl module for random selecting of a file
- 0.21 devel =3 0.21Version of this port present on the latest quarterly branch.
- Maintainer: bofh@FreeBSD.org
- Port Added: 2005-07-22 11:05:22
- Last Update: 2022-09-07 21:58:51
- Commit Hash: fb16dfe
- People watching this port, also watch:: p5-Math-Combinatorics, p5-Array-Iterator, p5-Sort-Naturally, p5-Tree-Simple-VisitorFactory, p5-Tree-Parser
- Also Listed In: perl5
- License: ART10 GPLv1+
- WWW:
- https://metacpan.org/release/File-Random
- Description:
- This module simplifies the routine job of selecting a random file. (As you
can find at CGI scripts). It's done, because it's boring (and
error prone), always to write something like
my @files = (<*.*>);
my $randf = $files[rand @files];
or
opendir DIR, " ... " or die " ... ";
my @files = grep {-f ...} (readdir DIR);
closedir DIR;
my $randf = $files[rand @files];
It also becomes very boring and very dangerous to write randomly selection
for subdirectory searching with special check-routines. The simple
standard job of selecting a random line from a file is implemented, too.
- ¦ ¦ ¦ ¦
- Manual pages:
- FreshPorts has no man page information for this port.
- pkg-plist: as obtained via:
make generate-plist - Dependency lines:
-
- p5-File-Random>0:devel/p5-File-Random
- To install the port:
- cd /usr/ports/devel/p5-File-Random/ && make install clean
- To add the package, run one of these commands:
- pkg install devel/p5-File-Random
- pkg install p5-File-Random
NOTE: If this package has multiple flavors (see below), then use one of them instead of the name specified above.- PKGNAME: p5-File-Random
- Flavors: there is no flavor information for this port.
- distinfo:
- TIMESTAMP = 1620417844
SHA256 (File-Random-0.21.tar.gz) = 69ca9391e0a371b470e1728d1a34418ed208da4a17717fc9cbaae0daf4c65424
SIZE (File-Random-0.21.tar.gz) = 13997
Packages (timestamps in pop-ups are UTC):
- Dependencies
- NOTE: FreshPorts displays only information on required and default dependencies. Optional dependencies are not covered.
- Build dependencies:
-
- p5-Set-Scalar>0 : devel/p5-Set-Scalar
- p5-Want>=0 : devel/p5-Want
- perl5>=5.32.r0<5.33 : lang/perl5.32
- perl5>=5.32.r0<5.33 : lang/perl5.32
- Runtime dependencies:
-
- p5-Set-Scalar>0 : devel/p5-Set-Scalar
- p5-Want>=0 : devel/p5-Want
- perl5>=5.32.r0<5.33 : lang/perl5.32
- There are no ports dependent upon this port
Configuration Options:
- No options to configure
- Options name:
- devel_p5-File-Random
- USES:
- perl5
- FreshPorts was unable to extract/find any pkg message
- Master Sites:
|
Commit History - (may be incomplete: for full details, see links to repositories near top of page) |
Commit | Credits | Log message |
07 Sep 2022 21:58:51 |
Stefan Eßer (se) |
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner) |
0.21 07 Sep 2022 21:10:59 |
Stefan Eßer (se) |
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above ) |
0.21 20 Jul 2022 14:21:35 |
Tobias C. Berner (tcberner) |
devel: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* "Waitman Gobble" <uzimac@da3m0n8t3r.com>
* <jkoshy@FreeBSD.org>
* Aaron Dalton <aaron@FreeBSD.org>
* Aaron Dalton <aaron@daltons.ca>
* Aaron H. K. Diep <ahkdiep@gmail.com>
* Aaron Hurt <ahurt@anbcs.com>
* Abel Chow <abel_chow@yahoo.com>
* Adam McLaurin
* Adam Saponara <as@php.net>
* Adam Weinberger <adamw@FreeBSD.org>
* Ade Lovett <ade@FreeBSD.org> (Only the first 15 lines of the commit message are shown above ) |
0.21 07 May 2021 21:14:22 |
Muhammad Moinur Rahman (bofh) |
devel/p5-File-Random: Update version 0.19=>0.21
Relnotes: https://metacpan.org/release/File-Random |
0.19 06 Apr 2021 14:31:07 |
Mathieu Arnold (mat) |
Remove # $FreeBSD$ from Makefiles. |
0.19 28 May 2020 09:05:01 |
bofh |
devel/p5-File-Random: Update version 0.18=>0.19
Relnotes: https://metacpan.org/release/File-Random |
0.18 06 Oct 2018 13:06:45 |
des |
Fix every instance of RUN_DEPENDS:=${BUILD_DEPENDS} in p5 ports, except
for where it resulted in a change in output from build-depends-list or
run-depends-list.
Approved by: portmgr (adamw) |
0.18 27 May 2018 20:15:20 |
sunpoet |
Update WWW
search.cpan.org is shutting down.
It will redirect to metacpan.org after June 25, 2018.
With hat: perl |
0.18 08 Jan 2018 20:15:44 |
bofh |
devel/p5-File-Random: Update version 0.17=>0.18
- mark NO_ARCH
Relnotes: http://cpansearch.perl.org/src/BIGJ/File-Random-0.18/Changes |
0.17_2 15 Sep 2017 08:58:50 |
mat |
Fix license information for portgs that use "the same license as Perl".
Sponsored by: Absolight |
0.17_2 19 May 2016 10:21:25 |
amdmi3 |
- Fix trailing whitespace in pkg-descrs, categories [a-f]*
Approved by: portmgr blanket |
0.17_2 01 Apr 2016 14:00:57 |
mat |
Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.
With hat: portmgr
Sponsored by: Absolight |
0.17_2 24 Dec 2014 00:14:13 |
bofh |
Change my non-FreeBSD MAINTAINER mail to bofh@
Approved by: bapt |
0.17_2 26 Nov 2014 13:08:38 |
mat |
Change the way Perl modules are installed, update the default Perl to 5.18.
Before, we had:
site_perl : lib/perl5/site_perl/5.18
site_perl/perl_arch : lib/perl5/site_perl/5.18/mach
perl_man3 : lib/perl5/5.18/man/man3
Now we have:
site_perl : lib/perl5/site_perl
site_arch : lib/perl5/site_perl/mach/5.18
perl_man3 : lib/perl5/site_perl/man/man3
Modules without any .so will be installed at the same place regardless of the (Only the first 15 lines of the commit message are shown above ) |
0.17_1 27 Oct 2014 10:55:59 |
bapt |
Cleanup plist |
0.17_1 25 May 2014 12:40:53 |
sunpoet |
- Add LICENSE
- Pass maintainership to submitter
- While I'm here, sort *_DEPENDS
PR: ports/189582
Submitted by: Muhammad Moinur Rahman <5u623l20@gmail.com> |
0.17_1 29 Oct 2013 12:52:07 |
vanilla |
Support STAGEDIR. |
0.17_1 20 Sep 2013 17:13:47 |
bapt |
Add NO_STAGE all over the place in preparation for the staging support (cat:
devel part 3) |
0.17_1 02 Aug 2013 18:21:06 |
az |
- Convert to new perl framework |
0.17_1 05 Jun 2012 18:15:31 |
ak |
- Remove SITE_PERL from *_DEPENDS
Submitted by: az
Approved by: eadler (mentor) |
0.17_1 15 Feb 2012 16:01:49 |
swills |
- Add missing DEPENDS
- Add TEST_DEPENDS to enable testing |
0.17 21 Jan 2012 17:40:15 |
eadler |
At the moment 1385 ports use BUILD_DEPENDS= ${RUN_DEPENDS} and 450
ports use BUILD_DEPENDS:= ${RUN_DEPENDS}. This patch fixes ports that are
currently broken. This is a temporary measure until we organically stop using
:= or someone(s) spend a lot of time changing all the ports over.
Explicit duplication > := > = and this just moves ports one step to the left
Approved by: portmgr |
0.17 03 Jul 2011 14:59:23 |
ohauer |
-remove MD5 |
0.17 21 Dec 2009 02:19:12 |
dougb |
For ports maintained by ports@FreeBSD.org, remove names and/or
e-mail addresses from the pkg-descr file that could reasonably
be mistaken for maintainer contact information in order to avoid
confusion on the part of users looking for support. As a pleasant
side effect this also avoids confusion and/or frustration for people
who are no longer maintaining those ports. |
0.17 23 May 2008 21:18:39 |
olgeni |
Hunt for typos in devel/p5-*. |
0.17 29 Apr 2008 05:27:10 |
linimon |
Reset aaron's port maintainerships due to many maintainer-timeouts. |
0.17 17 Apr 2008 14:30:31 |
araujo |
- Take advantage of CPAN macro from bsd.sites.mk, change
${MASTER_SITE_PERL_CPAN} to CPAN.
PR: ports/122674
Submitted by: Philip M. Gollucci <pgollucci@p6m7g8.com>
Reworked by: araujo (myself)
Approved by: portmgr (pav) |
0.17 08 Sep 2007 00:57:38 |
linimon |
Welcome bsd.perl.mk. Add support for constructs such as USE_PERL5=5.8.0+.
Drop support for antique perl.
Work done by: gabor
Sponsored by: Google Summer of Code 2007
Hat: portmgr |
0.17 23 May 2006 16:34:19 |
aaron |
- Updated maintainer
- Corrected IGNORE message
Approved by: tobez (implicit) |
0.17 22 Jan 2006 08:30:12 |
edwin |
SHA256ify
Approved by: krion@ |
0.17 22 Jan 2006 01:48:34 |
edwin |
Replace ugly "@unexec rmdir %D... 2>/dev/null || true" with @dirrmtry
Approved by: krion@
PR: ports/88711 (related) |
0.17 22 Jul 2005 11:04:36 |
erwin |
Add p5-File-Random 0.17, perl module for random selecting of a file.
PR: ports/82864
Submitted by: Aaron Dalton <aaron@daltons.ca> |