devel/p5-Module-Release: Update to 2.136

Changes:	https://metacpan.org/dist/Module-Release/changes

devel/p5-Module-Release: Update to 2.135

Changes:	https://metacpan.org/dist/Module-Release/changes

devel/p5-Module-Release: Update to 2.133

Changes:	https://metacpan.org/dist/Module-Release/changes

devel/p5-Module-Release: Update to 2.131

Changes:	https://metacpan.org/dist/Module-Release/changes

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

devel: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  "Waitman Gobble" <uzimac@da3m0n8t3r.com>
  *  <jkoshy@FreeBSD.org>
  *  Aaron Dalton <aaron@FreeBSD.org>
  *  Aaron Dalton <aaron@daltons.ca>
  *  Aaron H. K. Diep <ahkdiep@gmail.com>
  *  Aaron Hurt <ahurt@anbcs.com>
  *  Abel Chow <abel_chow@yahoo.com>
  *  Adam McLaurin
  *  Adam Saponara <as@php.net>
  *  Adam Weinberger <adamw@FreeBSD.org>
  *  Ade Lovett <ade@FreeBSD.org>

devel/p5-Module-Release: Update to 2.128

Changes:	https://metacpan.org/changes/distribution/Module-Release

Remove # $FreeBSD$ from Makefiles.

Update to 2.127

Changes:	https://metacpan.org/changes/distribution/Module-Release

Fix every instance of RUN_DEPENDS:=${BUILD_DEPENDS} in p5 ports, except
for where it resulted in a change in output from build-depends-list or
run-depends-list.

Approved by:	portmgr (adamw)

Update WWW

search.cpan.org is shutting down.
It will redirect to metacpan.org after June 25, 2018.

With hat:	perl

Update to 2.125

Changes:	http://search.cpan.org/dist/Module-Release/Changes

Update to 2.124

- Fix LICENSE
- Add LICENSE_FILE

Changes:	http://search.cpan.org/dist/Module-Release/Changes

Fix license information for portgs that use "the same license as Perl".

Sponsored by:	Absolight

- Update to 2.123
- Use real PORTVERSION

Changes:	http://search.cpan.org/dist/Module-Release/Changes

- Remove outdated PERL_LEVEL check

Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.

With hat:	portmgr
Sponsored by:	Absolight

- Update to 2.122

Changes:	http://search.cpan.org/dist/Module-Release/Changes

- Update to 2.12

Changes:	http://search.cpan.org/dist/Module-Release/Changes

- Add NO_ARCH
- Sort PLIST

Make it so that the default Perl is always called perl5.

- Move Perl's man1 files along with its man3 files.
- Move where Perl installs its modules man1 pages.
- Convert the ports installing man1 pages.
- Make different Perl versions installable at the same time.
  Though you should note that only the default version can be used to
  install Perl modules, and the non default Perl versions cannot use the
  modules installed via ports if they contain .so as they are installed
  in a version specific directory.

Reviewed by:	bapt (the Mk bits)
Exp-run by:	antoine
Sponsored by:	Absolight
Differential Revision:	https://reviews.freebsd.org/D3542

- Fix BUILD_DEPENDS

Change the way Perl modules are installed, update the default Perl to 5.18.

Before, we had:

  site_perl :           lib/perl5/site_perl/5.18
  site_perl/perl_arch : lib/perl5/site_perl/5.18/mach
  perl_man3 :           lib/perl5/5.18/man/man3

Now we have:

  site_perl : lib/perl5/site_perl
  site_arch : lib/perl5/site_perl/mach/5.18
  perl_man3 : lib/perl5/site_perl/man/man3

Modules without any .so will be installed at the same place regardless of the

Cleanup plist

- Update to 2.11

Changes:	http://search.cpan.org/dist/Module-Release/Changes

- Update to 2.09

Changes:	http://search.cpan.org/dist/Module-Release/Changes

- Update to 2.08

Changes:	http://search.cpan.org/dist/Module-Release/Changes

- Update to 2.07
- Add LICENSE

Changes:	http://search.cpan.org/dist/Module-Release/Changes

- Support STAGEDIR

Add NO_STAGE all over the place in preparation for the staging support (cat:
devel part 3)

- Cleanup Makefile header

- Convert to new perl framework

- Update to 2.06
- Sort PLIST
- Take maintainership

Changes:        http://search.cpan.org/dist/Module-Release/Changes

- Expand the value of BUILD_DEPENDS before assigning it to RUN_DEPENDS
- Add TEST_DEPENDS

- Change PERL_CONFIGURE to "yes" for all values less than or equal to 5.8.0+

With hat:       perl

-remove MD5

- Remove unneeded dependencies which is in perl-5.8.9 dist
  (part 14).

Approved by:    portmgr (itetcu)

With portmgr hat on, reset the maintainership of skv@ for ports that
he has had one or more maintainer-timeouts on in the past 12 months.

Update to 2.05

Changes:        http://cpansearch.perl.org/src/BDFOY/Module-Release-2.05/Changes

- Update to 2.04

PR:             ports/134817
Approved by:    maintainer timeout (skv; 15 days)
Submitted by:   me

- Take advantage of CPAN macro from bsd.sites.mk, change
${MASTER_SITE_PERL_CPAN} to CPAN.

PR:             ports/122674
Submitted by:   Philip M. Gollucci <pgollucci@p6m7g8.com>
Reworked by:    araujo (myself)
Approved by:    portmgr (pav)

Update to 1.20

Changes:        http://search.cpan.org/src/BDFOY/Module-Release-1.20/Changes

Update to 1.17

Welcome bsd.perl.mk.  Add support for constructs such as USE_PERL5=5.8.0+.
Drop support for antique perl.

Work done by:   gabor
Sponsored by:   Google Summer of Code 2007
Hat:            portmgr

Update to 1.16

Update to 1.14

Update to 1.13

Update to 1.12

PR:             ports/104483
Submitted by:   leeym

BROKEN: Unfetchable

Approved by:    portmgr (self)

Update to 1.11

PR:             ports/103668
Submitted by:   Gea-Suan Lin <gslin xx gslin.org>

Update to 1.10

Update to 1.08

* move devel/p5-release to devel/p5-Module-Release
* update p5-Module-Release to 1.04

SHA256ify

Approved by:    krion@

Replace ugly "@unexec rmdir %D... 2>/dev/null || true" with @dirrmtry

Approved by:    krion@
PR:             ports/88711 (related)