devel/p5-Module-ScanDeps: Update to 1.37

Changes:	https://metacpan.org/dist/Module-ScanDeps/changes

devel/p5-Module-ScanDeps: Update to 1.35

Changes:	https://metacpan.org/dist/Module-ScanDeps/changes

devel/p5-Module-ScanDeps: Update to 1.34

Changes:	https://metacpan.org/dist/Module-ScanDeps/changes

devel/p5-Module-ScanDeps: Update to 1.33

Changes:	https://metacpan.org/dist/Module-ScanDeps/changes

devel/p5-Module-ScanDeps: Update to 1.32

Changes:	https://metacpan.org/dist/Module-ScanDeps/changes

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

devel: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  "Waitman Gobble" <uzimac@da3m0n8t3r.com>
  *  <jkoshy@FreeBSD.org>
  *  Aaron Dalton <aaron@FreeBSD.org>
  *  Aaron Dalton <aaron@daltons.ca>
  *  Aaron H. K. Diep <ahkdiep@gmail.com>
  *  Aaron Hurt <ahurt@anbcs.com>
  *  Abel Chow <abel_chow@yahoo.com>
  *  Adam McLaurin
  *  Adam Saponara <as@php.net>
  *  Adam Weinberger <adamw@FreeBSD.org>
  *  Ade Lovett <ade@FreeBSD.org>

devel/p5-Module-ScanDeps: Update to 1.31

Changes:	https://metacpan.org/changes/distribution/Module-ScanDeps

Remove # $FreeBSD$ from Makefiles.

Update to 1.30

Changes:	https://metacpan.org/changes/distribution/Module-ScanDeps

Update to 1.29

Changes:	https://metacpan.org/changes/distribution/Module-ScanDeps

Update to 1.28

Changes:	https://metacpan.org/changes/distribution/Module-ScanDeps

Update to 1.27

Changes:	https://metacpan.org/changes/distribution/Module-ScanDeps

Update to 1.26

Changes:	https://metacpan.org/changes/distribution/Module-ScanDeps

Update to 1.25

Changes:	https://metacpan.org/changes/distribution/Module-ScanDeps

Update WWW

search.cpan.org is shutting down.
It will redirect to metacpan.org after June 25, 2018.

With hat:	perl

Fix license information for portgs that use "the same license as Perl".

Sponsored by:	Absolight

Update to 1.24

Changes:	http://search.cpan.org/dist/Module-ScanDeps/Changes

- Update to 1.23
- Add TEST_DEPENDS

Changes:	http://search.cpan.org/dist/Module-ScanDeps/Changes

- Update to 1.22

Changes:	http://search.cpan.org/dist/Module-ScanDeps/Changes

- Update to 1.21

Changes:	http://search.cpan.org/dist/Module-ScanDeps/Changes

- Update to 1.20
- Sort PLIST

Changes:	http://search.cpan.org/dist/Module-ScanDeps/Changes

Make it so that the default Perl is always called perl5.

- Move Perl's man1 files along with its man3 files.
- Move where Perl installs its modules man1 pages.
- Convert the ports installing man1 pages.
- Make different Perl versions installable at the same time.
  Though you should note that only the default version can be used to
  install Perl modules, and the non default Perl versions cannot use the
  modules installed via ports if they contain .so as they are installed
  in a version specific directory.

Reviewed by:	bapt (the Mk bits)
Exp-run by:	antoine
Sponsored by:	Absolight
Differential Revision:	https://reviews.freebsd.org/D3542

- Remove MASTER_SITE_SUBDIR
- Add NO_ARCH

- Update to 1.19

Changes:	http://search.cpan.org/dist/Module-ScanDeps/Changes

- Fix LICENSE
- Remove outdated post-patch:
- Remove regression-test:
- Sort PLIST
- Reformat pkg-descr
- Take maintainership

Upgrade to 1.18, add LICENSE.

Upgrade to 1.17.

Drop maintainership as I no longer use these software nor have time and
energy to keep up.

Change the way Perl modules are installed, update the default Perl to 5.18.

Before, we had:

  site_perl :           lib/perl5/site_perl/5.18
  site_perl/perl_arch : lib/perl5/site_perl/5.18/mach
  perl_man3 :           lib/perl5/5.18/man/man3

Now we have:

  site_perl : lib/perl5/site_perl
  site_arch : lib/perl5/site_perl/mach/5.18
  perl_man3 : lib/perl5/site_perl/man/man3

Modules without any .so will be installed at the same place regardless of the

Cleanup plist

- Stage support

Add NO_STAGE all over the place in preparation for the staging support (cat:
devel part 3)

- convert to the new perl5 framework
- trim Makefile header

Approved by:	portmgr (bapt@, blanket)

- Cleanup outdated checks. (PERL_LEVEL < 5.12)
- Assign some p5- ports under perl@ maintainership.

Approved by:	portmgr@ (bapt@)

- Update to 1.10

- Update to 1.08

PR:		ports/171125
Submitted by:	swills@

- Revert ports/165605 as requested by portmgr@

Note: devel/p5-B-Size and devel/p5-Devel-Arena
where intentionally not restored.

PR:             ports/165605
Approved by:    portmgr (bapt)
Feature safe:   yes (I sure hope so)

- Remove ports that only work with < perl 5.12 (devel/p5-B-Size,
devel/p5-Devel-Arena)
- Remove conditionals for PERL_LEVEL < 501200
- Remove regression-test targets b/c this will be centralized in Mk/bsd.perl.mk
- Other minor cleanups
  RUN_DEPENDS = ${BUILD_DEPENDS} -> RUN_DEPENDS:= ${BUILD_DEPENDS}

PR:             ports/165605
Submitted by:   pgollucci (myself)
Approved by:    portmgr (linimon)
Exp Run by:     linimon
Tested by:      make index

- Update to 1.07

- Update to 1.04

- Update to 1.02

PR:             ports/156794
Submitted by:   sunpoet@

- Update to 1.00

- Update to 0.98

PR:             ports/149223
Submitted by:   Frederic Culot <frederic at culot.org>

- Update to 0.97

- Update to 0.96

PR:             ports/140630
Submitted by:   leeym

- Update to 0.95

Feature safe: yes

- Update to 0.94

- Update to 0.93

PR:             ports/137357
Submitted by:   leeym

- Update to 0.91

- Update to 0.90

- Update to 0.89

- Update to 0.87
- Remove no-op post-extract target

- Update to 0.86

PR:             ports/128357
Submitted by:   leeym

- Update to 0.84

- Update to 0.83
- Use magic CPAN macro

- Update to 0.82

- Update to 0.81

- Update to 0.77

- Update to 0.76

- Add missing dependency which was introduced in version 0.75.  For some
  unknown reasons, Makefile.PL does not correctly check the dependency.
  This fixes p5-PAR-Packer build.

Reported by: pointyhat via pav

- Update to 0.75

- Update to 0.74

- Update to 0.73
- Drop perl < 5.6 support

- Update to 0.72

- Update to 0.71

- Update to 0.70

- Update to 0.69

- Update to 0.68

- Update to 0.66

PR:             ports/103577
Submitted by:   Gea-Suan Lin <gslin at gslin.org>

- Update to 0.64

PR:             ports/103518
Submitted by:   clsung

- Update to 0.63

PR:             ports/102585
Submitted by:   Jin-Shan Tseng <tjs_AT_cdpa dot nsysu dot edu dot tw>
Approved by:    maintainer (rafan, implicit)

- Update to 0.62

PR:             ports/100388
Submitted by:   clsung

- Update to 0.61

Approved by:    delphij (mentor)

Change to my FreeBSD.org email.

Approved by:    delphij (mentor)

- update to 0.60

PR:             97762
Submitted by:   maintainer (Rong-En Fan)

- Update to 0.59
- maintainer notes:
  Note that this is still broken with perl < 5.6 (it's buildable,
  but the module can not be loaded).

PR:             ports/96961
Submitted by:   maintainer (Rong-En Fan)

requires newer perl to build and run. I have a patch to make it
build on perl 5.005, but then the module can not load. already
informed the author. until a fix comes, make it requires newer perl.

PR:             96502
Submitted by:   maintainer (Rong-En Fan)

- Update to 0.58

PR:             96341
Submitted by:   maintainer (Rong-En Fan)

Update to 0.57.

PR:             94120
Submitted by:   Rong-En Fan (maintainer)

Replace ugly "@unexec rmdir %D... 2>/dev/null || true" with @dirrmtry

Approved by:    krion@
PR:             ports/88711 (related)

- update to 0.54

PR:             91625
Submitted by:   clsung
Approved by:    Rong-En Fan (maintainer)

- update to 0.53

PR:             91577
Submitted by:   clsung
Approved by:    Rong-En Fan (maintainer)

- add WWW: in pkg-descr
- Update to 0.51

from changes:
* scandeps.pl is now usable without CPANPLUS.pm installed.
  Reported by: Rafael Garcia-Suarez

PR:             76034
Submitted by:   maintainer

- update to 0.50
- add pre-install sec.

PR:             ports/72625
Submitted by:   maintainer (Rong-En Fan)
Approved by:    co-mentor (vanilla)

- Update to 0.48
* Fix case-insensitive checks.
* Skip auto/ files too if explicitly specified.
* Also check for lower-cased keys in %skip, if operating under a
  case-insensitive file system.

PR:             ports/71569
Submitted by:   maintainer (Rong-En Fan)
Approved by:    mentor (vanilla)

- Update to 0.47

PR:             ports/71251
Submitted by:   Rong-En Fan (maintainer)
Approved by:    vanilla (co-mentor)

upgrade to 0.46
pass maintainership

PR:             70141
Submitted by:   Rong-En Fan <rafan@infor.org> (new maintainer)
Reviewed by:    old maintainer

Add size data, approved by maintainers.

Update to version 0.37.

Submitted by:   Autrijus Tang <autrijus@autrijus.org> (maintainer)

Update to version 0.30.

Submitted by:   maintainer

New port: p5-Module-ScanDeps

This module scans potential modules used by perl programs, using
line-by-line analysis and elaborate heuristics.

Submitted by:   Autrijus Tang <autrijus@autrijus.org>