*/*: Chase editors/emacs update

Sponsored by:	The FreeBSD Foundation

Chase major version update of editors/emacs-devel

Bump PORTREVISION of most USES=emacs ports after editors/emacs-devel
major version increased from 30 to 31.

Sponsored by:	The FreeBSD Foundation

Chase editors/emacs update to 29.4

- Bump Emacs version in Mk/Uses/emacs.mk to update version-specific
  paths
- Bump PORTREVISION of ports with USES=emacs.  This is required for two
  reasons.  Emacs lisp files need to be byte compiled for the new Emacs
  version, and files installed under, e.g., EMACS_VERSION_SITE_LISPDIR
  need to be relocated.

Reviewed by:	ashish, yasu
Sponsored by:	The FreeBSD Foundation
Differential Revision:	https://reviews.freebsd.org/D45705

Chase editors/emacs update

- Bump Emacs version in Mk/Uses/emacs.mk to update version-specific
  paths
- Bump PORTREVISION of ports with USES=emacs.  This is required for two
  reasons.  Emacs lisp files need to be byte compiled for the new Emacs
  version, and files installed under, e.g., EMACS_VERSION_SITE_LISPDIR
  need to be relocated.

Reviewed by:	ashish
Sponsored by:	The FreeBSD Foundation
Differential Revision:	https://reviews.freebsd.org/D44492

*/*: Chase editors/emacs update

- Bump Emacs version in Mk/Uses/emacs.mk to update version-specific
  paths

- Bump PORTREVISION of ports with USES=emacs.  This is required for two
  reasons.  Emacs lisp files need to be byte compiled for the new Emacs
  version, and files installed under, e.g., EMACS_VERSION_SITE_LISPDIR
  need to be relocated.

Reviewed by:	ashish
Sponsored by:	The FreeBSD Foundation
Differential Revision:	https://reviews.freebsd.org/D43615

devel/p5-Sepia: Update LICENSE

Use dual license as per Perl terms. This is mentioned only in the README
file.

Approved by:	portmgr (blanket)

devel/p5-Sepia: Unbreak

- Add LICENSE NONE
- Pet portclippy

Approved by:	portmgr (blanket)

editors/emacs: Update to 29.1

* Update Canna patch to the one for Emacs 29.
* Add new options PGTK, SQLITE3, TREESITTER and WEBP. SQLITE3 and
  TREESITTER are ON by default. PGTK and WEBP options are excluded
  from nox flavor.
* CARGO option doesn't imply XFT but prevents it. It is caused as a
  result of adding pure GTK support (PGTK option).
* OTK options doesn't imply XTF any more. It is also caused as a
  result of adding pure GTK support.
* Update NATIVECOMP option so it specifies ahead-of-time compilation
  via the configure argument.
* Remove "experimental" from NATIVECOMP_DESC.
* Add print/freetype2 and x11-fonts/fontconfig to CAIRO_LIB_DEPENDS
  and GTK3_LIB_DEPENDS. Necessary to link emacs binary with shared

*: Bump PORTREVISIONs for math/mpc update to 1.3.1

devel/p5-Sepia: mark devel* flavors BROKEN

[Makefile:955: sepia-snippet.elc] Error 1
[Makefile:955: sepia.elc] Error 1
[Makefile:955: sepia-w3m.elc] Error 1

Reported by:	pkg-fallout

editors/emacs-devel: Update to 2022-11-28 snapshot

Bump PORTREVISION of consumers as EMACS_VER is changed to 30.0.50.

Changes:	https://github.com/emacs-mirror/emacs/compare/51589f81...7939184f

editors/emacs: Update to 28.2

* Remove FCITXPATCH option as extra-patch-src_xfns.c can't be applied
  since 28.1.
* Tidy up Makefile with portfmt.
* Bump PORTREVISION of consumers.

ChangeLog:	https://www.gnu.org/software/emacs/news/NEWS.28.2

PR:		266454
Exp-run by:	antoine
Reviewed by:	ashish, jrm
Differential Revision:	https://reviews.freebsd.org/D36613

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

devel: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  "Waitman Gobble" <uzimac@da3m0n8t3r.com>
  *  <jkoshy@FreeBSD.org>
  *  Aaron Dalton <aaron@FreeBSD.org>
  *  Aaron Dalton <aaron@daltons.ca>
  *  Aaron H. K. Diep <ahkdiep@gmail.com>
  *  Aaron Hurt <ahurt@anbcs.com>
  *  Abel Chow <abel_chow@yahoo.com>
  *  Adam McLaurin
  *  Adam Saponara <as@php.net>
  *  Adam Weinberger <adamw@FreeBSD.org>
  *  Ade Lovett <ade@FreeBSD.org>

Emacs ports: Bump PORTREVISION after Emacs 28.1

Reviewed by:	ashish
Sponsored by:	The FreeBSD Foundation
Differential Revision:	https://reviews.freebsd.org/D34781

USES=emacs: Chase package name changes

PR:		259259
Differential Revision:	https://reviews.freebsd.org/D32613

*: Chase new major version (29) of editors/emacs-devel

Differential Revision:	https://reviews.freebsd.org/D32258

Remove # $FreeBSD$ from Makefiles.

editors/emacs: Update to 27.2

This is a bug-fix release with no new features.

https://www.gnu.org/software/emacs/news/NEWS.27.2

Reviewed by:	ashish
Differential Revision:	https://reviews.freebsd.org/D27700

editors/emacs: Update to version 27.1

Please refer to the 20200811 UPDATING entry when upgrading
dependent (*-emacs26-*) ports.

Port changes:

- depend on math/gmp
- match upstream by turning CAIRO, HARFBUZZ, and JSON options and on and
  turning MAGICK off by default
- remove OPENMP check for graphics/ImageMagick as the openmp is now
  included in base
- update EMACS_VER in Mk/Uses/emacs.mk
- bump USES=emacs ports or remove BROKEN for net-im/jabber.el and
  deskutils/howm, which now build

Submitted by:	HIROSE Yuuji <yuuji@gentei.org> (canna patch)
Reviewed by:	ashish
Differential Revision:	https://reviews.freebsd.org/D23966

Move devel/p5-IO-stringy to devel/p5-IO-Stringy and update to 2.113

- Fix LICENSE_FILE
- Update pkg-descr
- Update WWW
- Bump PORTREVISION of dependent ports for dependency change

Changes:	https://metacpan.org/changes/distribution/IO-Stringy

editors/emacs-devel: Update to latest master branch commit, 4f2b415

This update includes an Emacs major version change from 27.0.50 to 28.0.50.
Ports that may depend on editors/emacs-devel must chase this update
with a PORTREVISION bump.

Submitted by:	ashish (maintainer)
Differential Revision:	https://reviews.freebsd.org/D23012

Install texinfo files (GNU info) into ${PREFIX}/share/info

After a discussion on the mailing list on moving manpages to
${PREFIX}/share/man for consistency with base where it is
installed in usr/share/man, it appeared the same should happen
to GNU info files which were installed under share in base and
not in ports.

Now texinfo is not in base on any of the supported version of FreeBSD
it is possible to proceed to this move and it is easier to do than
the manpage change.

Other benefit than consistency are less patching: all build tools but
cmake are expecting info files to be under share/info and cmake (patched here)
was having an exception for BSD so the patch makes FreeBSD case less
specific for them

Bump revision of all impacted ports

PR:		232907
exp-run by:	antoine
Differential Revision:	https://reviews.freebsd.org/D17816

Fix every instance of RUN_DEPENDS:=${BUILD_DEPENDS} in p5 ports, except
for where it resulted in a change in output from build-depends-list or
run-depends-list.

Approved by:	portmgr (adamw)

USES=emacs ports: Bump PORTREVISION for editors/emacs 26.1 upgrade

Or, mark ports that fail to build as BROKEN.
https://lists.freebsd.org/pipermail/freebsd-ports/2018-May/113518.html

Update WWW

search.cpan.org is shutting down.
It will redirect to metacpan.org after June 25, 2018.

With hat:	perl

Flavorize and modernize Emacs ports

- Convert USE_EMACS to USES=emacs
- Remove editors/emacs-nox11 (refer to nox flavors of editors/emacs and
  editors/emacs-devel)
- Permit default Emacs flavor to be specified in make.conf
- Rename japanese/migemo-emacs23 to japanese/migemo-emacs
- Update and simplify audio/emms and fix build on FreeBSD 10 [1]
- Update databases/bbdd and fix build on FreeBSD 10 [1]
- Update editors/emacs-devel
- Ensure Makefile shell commands that change directory are executed in a
  subshell
- Silence some portlint warnings

[1] By not depending on base texinfo

PR:		225404
Reviewed by:	antoine
Approved by:	portmgr (mat) ashish (maintainer)
Differential Revision:	https://reviews.freebsd.org/D13506

Chase Emacs update

Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.

With hat:	portmgr
Sponsored by:	Absolight

Make it so that the default Perl is always called perl5.

- Move Perl's man1 files along with its man3 files.
- Move where Perl installs its modules man1 pages.
- Convert the ports installing man1 pages.
- Make different Perl versions installable at the same time.
  Though you should note that only the default version can be used to
  install Perl modules, and the non default Perl versions cannot use the
  modules installed via ports if they contain .so as they are installed
  in a version specific directory.

Reviewed by:	bapt (the Mk bits)
Exp-run by:	antoine
Sponsored by:	Absolight
Differential Revision:	https://reviews.freebsd.org/D3542

- Chase GNU Emacs updates

PR:		199553

Change the way Perl modules are installed, update the default Perl to 5.18.

Before, we had:

  site_perl :           lib/perl5/site_perl/5.18
  site_perl/perl_arch : lib/perl5/site_perl/5.18/mach
  perl_man3 :           lib/perl5/5.18/man/man3

Now we have:

  site_perl : lib/perl5/site_perl
  site_arch : lib/perl5/site_perl/mach/5.18
  perl_man3 : lib/perl5/site_perl/man/man3

Modules without any .so will be installed at the same place regardless of the

- Chase GNU Emacs updates

PR:		194624

Cleanup plist

Allow to build with texinfo from ports

- Convert gmake, bzip2 to USES

Approved by:	portmgr

- Support staging
- Use single space between WWW and url

Fix properties on pkg-plist

Add NO_STAGE all over the place in preparation for the staging support (cat:
devel part 3)

- convert to the new perl5 framework

Approved by:	portmgr (bapt@, blanket)

GNU Emacs updates

editors/emacs:
 - Update to 24.3
 - Update CANNA patchset[1]
 - Unbreak ARM support by using the patch from emacs-devel port
 - Add missing INSTALLS_ICONS[2]
 - Remove a patch which is already integrated upstream
 - Fix Makefile header

editors/emacs-devel:
 - Update to bzr revision 112178
 - Fix Makefile header
 - Add missing INSTALLS_ICONS[2]

Chase Emacs updates

- Bump PORTREVISION to chase Emacs port updates
- Unbreak INDEX caused by databases/lsdb, editors/flim, and editors/semi

- update png to 1.5.10

- Chase Emacs updates

PR:             ports/165082

Sepia is a set of features to make Emacs a better tool for Perl
development. This package contains the Perl side of the
implementation, including all user-serviceable parts (for the
cross-referencing facility see Sepia::Xref).

WWW:    http://search.cpan.org/dist/Sepia/

Feature safe:   yes