*/*: Properly depend on Subversion LTS or latest with WITH_SUBVERSION_VER

When LTS version of Subversion is set in make.conf (WITH_SUBVERSION_VER)
depending ports will still depend on latest version (devel/subversion)
instead of LTS one (devel/subversion-lts). This will cause dependency
conflicts when packages are distributed with Poudriere, namely pkg(8)
will report them and fail to install.
Make all affected ports properly depend on the right port based on the
value set in WITH_SUBVERSION_VER.

Approved by:	jrm (mentor), otis (mentor), lev (maintainer timeout)
Differential Revision:	https://reviews.freebsd.org/D43864

Mk/Uses/apache.mk: Refactor after removal of older versions

apache22 and apache25 had been removed a long time ago however the
apache.mk file has never been refactored and is out of sync from the
file Mk/bsd.default-versions.mk. These changes refactors the removals of
the older versions. In addition:

- Move some keywords like USE_APACHE, USE_APACHE_BUILD, USE_APACHE_RUN
  from SANITY_DEPRECATED to SANITY_UNSUPPORTED
- Remove apache versions from ports Makefiles as currently there is only
  one available version in the tree. However the version checks are
  still valid and should work flawlessly whenever a new version is
  added. For example USES=apache:2.2+ are simply replaced with
  USES=apache. As currently there are no other versions available for
  test this could not be checked on it's own ground.
- Update FOO_USE=APACHE=yes to FOO_USES=apache
- Remove trailing whitespaces

Approved by:    portmgr
Differential Revision: https://reviews.freebsd.org/D38113

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

devel: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  "Waitman Gobble" <uzimac@da3m0n8t3r.com>
  *  <jkoshy@FreeBSD.org>
  *  Aaron Dalton <aaron@FreeBSD.org>
  *  Aaron Dalton <aaron@daltons.ca>
  *  Aaron H. K. Diep <ahkdiep@gmail.com>
  *  Aaron Hurt <ahurt@anbcs.com>
  *  Abel Chow <abel_chow@yahoo.com>
  *  Adam McLaurin
  *  Adam Saponara <as@php.net>
  *  Adam Weinberger <adamw@FreeBSD.org>
  *  Ade Lovett <ade@FreeBSD.org>

Remove # $FreeBSD$ from Makefiles.

Remove all := from BUILD_DEPENDS, here are never needed.

While there, cleanup, and sort depends.

When build and run dependencies are the same, there are three ways to
avoid duplicating the list while not adding the framework added
BUILD_DEPENDS to the RUN_DEPENDS.  In order of preference, they are:

1) use RUN_DEPENDS to set BUILD_DEPENDS:

BUILD_DEPENDS=	${RUN_DEPENDS}
RUN_DEPENDS=	foo:bar/baz

2) create another variable and use it:

MY_DEPENDS= foo:bar/baz
BUILD_DEPENDS=	${MY_DEPENDS}
RUN_DEPENDS=	${MY_DEPENDS}

3) use BUILD_DEPENDS to set RUN_DEPENDS and force evaluation:

BUILD_DEPENDS=	foo:bar/baz
RUN_DEPENDS:=	${BUILD_DEPENDS}

Sponsored by:	Absolight

Update WWW

search.cpan.org is shutting down.
It will redirect to metacpan.org after June 25, 2018.

With hat:	perl

Migrate USE_APACHE to USES= apache

 - Following migration of Mk/bsd.apache.mk to Mk/Uses/apache.mk

With hat:	apache

Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.

With hat:	portmgr
Sponsored by:	Absolight

- Fix *_DEPENDS: version is already in all supported Perl releases
- Add LICENSE
- Sort PLIST
- Bump PORTREVISION for dependency change

Drop maintainership as I no longer use these software nor have time and
energy to keep up.

Change the way Perl modules are installed, update the default Perl to 5.18.

Before, we had:

  site_perl :           lib/perl5/site_perl/5.18
  site_perl/perl_arch : lib/perl5/site_perl/5.18/mach
  perl_man3 :           lib/perl5/5.18/man/man3

Now we have:

  site_perl : lib/perl5/site_perl
  site_arch : lib/perl5/site_perl/mach/5.18
  perl_man3 : lib/perl5/site_perl/man/man3

Modules without any .so will be installed at the same place regardless of the

Cleanup plist

- add stage support

Approved by:	portmgr (blanket infrastructure)

Add NO_STAGE all over the place in preparation for the staging support (cat:
devel part 3)

- convert to the new perl5 framework
- trim Makefile header

Approved by:	portmgr (bapt@, blanket)

- remove www/apache20 and devel/apr0
- s/USE_APACHE= 20+/USE_APACHE= 22+/
- unify s/YES/yes/
- cleanup APACHE_VERSION <= 22 usage
- add entry to MOVED

with hat apache@

- Remove SITE_PERL from *_DEPENDS

Approved by: portmgr@ (bapt@)

- Convert all remaining instances of BUILD_DEPENDS=${RUN_DEPENDS} or
  RUN_DEPENDS=${BUILD_DEPENDS} to use := which portlint has warned
  about for a while.

PR:             ports/168208
Approved by:    portmgr (miwi)

-remove MD5

 mod_perl2 was updated, this changes are needet to prevent
 dependency loops

- fix mod_perl/mod_perl2 dependency
- p5-Apache-Reload is now included in mod_perl2
- make usage of CPAN author macro
- bump portrevision

commit with hat apache@

- Chase devel/apr -> devel/apr1 shuffling

PR:             ports/146553
Submitted by:   myself (pgollucci@)
With Hat:       apache@

4/5: Chase devel/apr shlib bump

PR:             ports/146130
Approved by:    portmgr (pav)
Tested by:      -exp run (pav)
With Hat:       apache@

- Fix -exp build for PR/141688 (mod_perl2 pkgname has apache version as suffix)

PR:             146123
Submitted by:   Philip M. Gollucci <pgollucci at frieza.p6m7g8.net>

- Bump PORTREVISION for devel/apr update

PR:             ports/125276
Submitted by:   rodrigc

  Bump PORTREVISION due to subversion upgrade.

  (1) Upgrade subversion to version 1.5.0.
  (2) Make binding ports to be real ports, which installs only bindings and
      depend on subversion.
  (3) Rename bindings ports to reflect perl5/python/ruby modules naming scheme.
  (4) Re-base subversion-freebsd to `devel/subversion'.
  (5) Fix all ports, which depends on subversion bindings.

Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)

- Take advantage of CPAN macro from bsd.sites.mk, change
${MASTER_SITE_PERL_CPAN} to CPAN.

PR:             ports/122674
Submitted by:   Philip M. Gollucci <pgollucci@p6m7g8.com>
Reworked by:    araujo (myself)
Approved by:    portmgr (pav)

- Update to 1.0.0

- Update to 0.995

- Update to 0.994.0

- Update to 0.992.0

PR:             ports/110832
Submitted by:   clsung

Add pushmi, a subversion repository replication tool.