| Port details |
- py-btest Simple driver for basic unit tests
- 1.1 devel
 =2      1.1Version of this port present on the latest quarterly branch. - Maintainer: mshirk@daemon-security.com
- Port Added: 2018-09-29 20:24:33
- Last Update: 2023-07-30 22:59:03
- Commit Hash: 323b584
- People watching this port, also watch:: jdictionary, py311-Automat, py311-python-gdsii, py39-PyOpenGL, p5-Sane
- Also Listed In: python
- License: BSD3CLAUSE
- WWW:
- https://github.com/zeek/btest/
- Description:
- BTest is a powerful framework for writing system tests. Freely
borrowing some ideas from other packages, its main objective is to
provide an easy-to-use, straightforward driver for a suite of
shell-based tests. Each test consists of a set of command lines
that will be executed, and success is determined based on their
exit codes. btest comes with some additional tools that can be used
within such tests to robustly compare output against a previously
established baseline.
  ¦  ¦  ¦  ¦ 
- Manual pages:
- FreshPorts has no man page information for this port.
- pkg-plist: as obtained via:
make generate-plist - There is no configure plist information for this port.
- Dependency lines:
-
- ${PYTHON_PKGNAMEPREFIX}btest>0:devel/py-btest@${PY_FLAVOR}
- To install the port:
- cd /usr/ports/devel/py-btest/ && make install clean
- To add the package, run one of these commands:
- pkg install devel/py-btest
- pkg install py39-btest
NOTE: If this package has multiple flavors (see below), then use one of them instead of the name specified above.
NOTE: This is a Python port. Instead of py39-btest listed in the above command, you can pick from the names under the Packages section.- PKGNAME: py39-btest
- Package flavors (<flavor>: <package>)
- distinfo:
- TIMESTAMP = 1690482761
SHA256 (zeek-btest-v1.1_GH0.tar.gz) = aee208c21c605f78161442e5fbd92cc59d508eb2344254dc4f50b589e37504d7
SIZE (zeek-btest-v1.1_GH0.tar.gz) = 101029
Packages (timestamps in pop-ups are UTC):
- Dependencies
- NOTE: FreshPorts displays only information on required and default dependencies. Optional dependencies are not covered.
- Build dependencies:
-
- py39-setuptools>=63.1.0 : devel/py-setuptools@py39
- python3.9 : lang/python39
- Test dependencies:
-
- python3.9 : lang/python39
- Runtime dependencies:
-
- py39-setuptools>=63.1.0 : devel/py-setuptools@py39
- python3.9 : lang/python39
- This port is required by:
- for Run
-
- security/py-zkg
-
Deleted ports which required this port:
- * - deleted ports are only shown under the This port is required by section. It was harder to do for the Required section. Perhaps later...
Configuration Options:- No options to configure
- Options name:
- devel_py-btest
- USES:
- python
- FreshPorts was unable to extract/find any pkg message
- Master Sites:
|
| Commit History - (may be incomplete: for full details, see links to repositories near top of page) |
| Commit | Credits | Log message |
|---|
1.1
30 Jul 2023 22:59:03
 |
Robert Clausecker (fuz)
Author: Shirkdog |
devel/py-btest: update to 1.1
Changelog: https://github.com/zeek/btest/blob/master/CHANGES
PR: 272760 |
0.71
27 Jun 2023 19:34:34
|
Rene Ladan (rene) |
all: remove explicit versions in USES=python for "3.x+"
The logic in USES=python will automatically convert this to 3.8+ by
itself.
Adjust two ports that only had Python 3.7 mentioned but build fine
on Python 3.8 too.
finance/quickfix: mark BROKEN with PYTHON
libtool: compile: c++ -DHAVE_CONFIG_H -I. -I../.. -I -I. -I.. -I../.. -I../C++
-DLIBICONV_PLUG -DPYTHON_MAJOR_VERSION=3 -Wno-unused-variable
-Wno-maybe-uninitialized -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong
-fno-strict-aliasing -DLIBICONV_PLUG -Wall -ansi
-Wno-unused-command-line-argument -Wpointer-arith -Wwrite-strings
-Wno-overloaded-virtual -Wno-deprecated-declarations -Wno-deprecated -std=c++0x
-MT _quickfix_la-QuickfixPython.lo -MD -MP -MF
.deps/_quickfix_la-QuickfixPython.Tpo -c QuickfixPython.cpp -fPIC -DPIC -o
.libs/_quickfix_la-QuickfixPython.o
warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean
'-Wno-uninitialized'? [-Wunknown-warning-option]
QuickfixPython.cpp:175:11: fatal error: 'Python.h' file not found
^~~~~~~~~~
1 warning and 1 error generated.
Reviewed by: portmgr, vishwin, yuri
Differential Revision: <https://reviews.freebsd.org/D40568> |
07 Sep 2022 21:58:51
|
Stefan Eßer (se) |
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner) |
0.71
07 Sep 2022 21:10:59
|
Stefan Eßer (se) |
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above  ) |
0.71
22 Nov 2021 19:46:49
|
Neel Chauhan (nc)
Author: Shirkdog |
devel/py-btest: Update to 0.71
Changes: https://github.com/zeek/btest/commits/master/CHANGES
PR: 259721 |
0.68
25 Jun 2021 21:01:58
|
Craig Leres (leres) |
devel/py-btest: Update to 0.68 and switch to github
Changes since 0.67:
- Preserve CRLF line-terminators in test files
PR: 256799
Approved by: mshirk@daemon-security.com (maintainer) |
0.67
07 Apr 2021 08:09:01
|
Mathieu Arnold (mat) |
One more small cleanup, forgotten yesterday.
Reported by: lwhsu |
0.67
06 Apr 2021 14:31:07
|
Mathieu Arnold (mat) |
Remove # $FreeBSD$ from Makefiles. |
0.67
25 Feb 2021 18:38:27
 |
nc |
devel/py-btest: Update to 0.67
Changes: https://github.com/zeek/btest/releases/tag/v0.67
PR: 253833
Submitted by: mshirk AT daemon-security DOT com (maintainer) |
0.62
28 Dec 2020 23:02:15
|
antoine |
Drop python 2.7 support from a few ports
With hat: portmgr |
0.62
09 Sep 2020 03:37:59
|
lwhsu |
devel/py-btest: Update to 0.62
PR: 249199
Submitted by: Shirkdog <mshirk@daemon-security.com> (maintainer) |
0.61
16 Feb 2020 21:21:01
|
dbaio |
devel/py-btest: Update to 0.61
Changelog: https://github.com/bro/btest/blob/v0.61/CHANGES
PR: 244050
Submitted by: mshirk@daemon-security.com (maintainer) |
0.58_1
10 Apr 2019 06:18:32
|
antoine |
Bump a few PORTREVISIONs after r498529
With hat: portmgr |
0.58
04 Oct 2018 08:33:37
|
0mp |
devel/py-btest: Add python to CATEGORIES.
Reported by: koobs
Reviewed by: koobs, krion
Approved by: krion (mentor)
Differential Revision: https://reviews.freebsd.org/D17391 |
0.58
29 Sep 2018 20:24:18
|
0mp |
New port: devel/py-btest: Simple driver for basic unit tests
The btest is a simple framework for writing unit tests. Freely borrowing
some ideas from other packages, it's main objective is to provide an
easy-to-use, straightforward driver for a suite of shell-based tests. Each
test consists of a set of command lines that will be executed, and success
is determined based on their exit codes. btest comes with some additional
tools that can be used within such tests to compare output against a
previously established baseline.
PR: 231738
Submitted by: Shirkdog <mshirk@daemon-security.com>
Reviewed by: krion, Nathan <ndowens@yahoo.com>
Approved by: krion (mentor)
Differential Revision: https://reviews.freebsd.org/D17353 |
As an Amazon Associate I earn from qualifying purchases.