| Port details |
- py-cog Code Generator for any language
- 3.1.0 devel
 =2      3.1.0Version of this port present on the latest quarterly branch. - Maintainer: apesternikov@page2rss.com
- Port Added: 2007-04-13 16:43:22
- Last Update: 2023-06-27 19:34:34
- Commit Hash: 3d9a815
- People watching this port, also watch:: jdictionary, py311-Automat, py311-python-gdsii, py39-PyOpenGL, p5-Sane
- Also Listed In: python
- License: MIT
- WWW:
- https://www.nedbatchelder.com/code/cog/index.html
- Description:
- Cog transforms files in a very simple way: it finds chunks of Python code
embedded in them, executes the Python code, and inserts its output back into
the original file. The file can contain whatever text you like around the
Python code. It will usually be source code.
  ¦  ¦  ¦  ¦ 
- Manual pages:
- FreshPorts has no man page information for this port.
- pkg-plist: as obtained via:
make generate-plist - There is no configure plist information for this port.
- Dependency lines:
-
- ${PYTHON_PKGNAMEPREFIX}cog>0:devel/py-cog@${PY_FLAVOR}
- To install the port:
- cd /usr/ports/devel/py-cog/ && make install clean
- To add the package, run one of these commands:
- pkg install devel/py-cog
- pkg install py39-cog
NOTE: If this package has multiple flavors (see below), then use one of them instead of the name specified above.
NOTE: This is a Python port. Instead of py39-cog listed in the above command, you can pick from the names under the Packages section.- PKGNAME: py39-cog
- Package flavors (<flavor>: <package>)
- distinfo:
- TIMESTAMP = 1639995468
SHA256 (cogapp-3.1.0.tar.gz) = c43e374ee5ca2a35fbc68556f598bd8578eabe8a890487980bba56945b5ce9c6
SIZE (cogapp-3.1.0.tar.gz) = 25578
Packages (timestamps in pop-ups are UTC):
- Dependencies
- NOTE: FreshPorts displays only information on required and default dependencies. Optional dependencies are not covered.
- Build dependencies:
-
- py39-setuptools>=63.1.0 : devel/py-setuptools@py39
- python3.9 : lang/python39
- Test dependencies:
-
- python3.9 : lang/python39
- Runtime dependencies:
-
- py39-setuptools>=63.1.0 : devel/py-setuptools@py39
- python3.9 : lang/python39
- This port is required by:
- for Run
-
- devel/py-easyprocess
- x11/py-pyvirtualdisplay
Configuration Options:- No options to configure
- Options name:
- devel_py-cog
- USES:
- python
- FreshPorts was unable to extract/find any pkg message
- Master Sites:
|
| Commit History - (may be incomplete: for full details, see links to repositories near top of page) |
| Commit | Credits | Log message |
|---|
3.1.0
27 Jun 2023 19:34:34
 |
Rene Ladan (rene) |
all: remove explicit versions in USES=python for "3.x+"
The logic in USES=python will automatically convert this to 3.8+ by
itself.
Adjust two ports that only had Python 3.7 mentioned but build fine
on Python 3.8 too.
finance/quickfix: mark BROKEN with PYTHON
libtool: compile: c++ -DHAVE_CONFIG_H -I. -I../.. -I -I. -I.. -I../.. -I../C++
-DLIBICONV_PLUG -DPYTHON_MAJOR_VERSION=3 -Wno-unused-variable
-Wno-maybe-uninitialized -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong
-fno-strict-aliasing -DLIBICONV_PLUG -Wall -ansi
-Wno-unused-command-line-argument -Wpointer-arith -Wwrite-strings
-Wno-overloaded-virtual -Wno-deprecated-declarations -Wno-deprecated -std=c++0x
-MT _quickfix_la-QuickfixPython.lo -MD -MP -MF
.deps/_quickfix_la-QuickfixPython.Tpo -c QuickfixPython.cpp -fPIC -DPIC -o
.libs/_quickfix_la-QuickfixPython.o
warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean
'-Wno-uninitialized'? [-Wunknown-warning-option]
QuickfixPython.cpp:175:11: fatal error: 'Python.h' file not found
^~~~~~~~~~
1 warning and 1 error generated.
Reviewed by: portmgr, vishwin, yuri
Differential Revision: <https://reviews.freebsd.org/D40568> |
3.1.0
11 Jan 2023 15:58:34
|
Dmitry Marakasov (amdmi3) |
*/*: rename CHEESESHOP to PYPI in MASTER_SITES
PR: 267994
Differential revision: D37518
Approved by: bapt |
07 Sep 2022 21:58:51
|
Stefan Eßer (se) |
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner) |
3.1.0
07 Sep 2022 21:10:59
|
Stefan Eßer (se) |
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above  ) |
3.1.0
20 Jul 2022 14:21:35
|
Tobias C. Berner (tcberner) |
devel: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* "Waitman Gobble" <uzimac@da3m0n8t3r.com>
* <jkoshy@FreeBSD.org>
* Aaron Dalton <aaron@FreeBSD.org>
* Aaron Dalton <aaron@daltons.ca>
* Aaron H. K. Diep <ahkdiep@gmail.com>
* Aaron Hurt <ahurt@anbcs.com>
* Abel Chow <abel_chow@yahoo.com>
* Adam McLaurin
* Adam Saponara <as@php.net>
* Adam Weinberger <adamw@FreeBSD.org>
* Ade Lovett <ade@FreeBSD.org> (Only the first 15 lines of the commit message are shown above ) |
3.1.0
07 Mar 2022 18:13:23
|
Po-Chuan Hsieh (sunpoet) |
devel/py-cog: Add NO_ARCH
Approved by: portmgr (blanket) |
3.1.0
20 Dec 2021 10:20:34
|
Wen Heping (wen) |
devel/py-cog: Update to 3.1.0
PR: 259309
Reported by: gspurki@gmail.com
Approved by: maintainer(timeout, >= 2 months) |
2.3_2
06 Apr 2021 14:31:07
|
Mathieu Arnold (mat) |
Remove # $FreeBSD$ from Makefiles. |
2.3_2
28 Dec 2020 23:02:15
 |
antoine |
Drop python 2.7 support from a few ports
With hat: portmgr |
2.3_2
02 Mar 2015 23:21:08
|
bapt |
Remove Author from pkg-descr and white space fixes |
2.3_2
10 Oct 2014 21:22:58
|
antoine |
Allow staging as a regular user, distfile was rerolled (previous distfile
had files and directories unreadable) |
2.3_1
19 Feb 2014 06:53:00
|
miwi |
- Stage support
- Convert to autoplist
- Bump PORTREV |
2.3
20 Sep 2013 17:13:47
|
bapt |
Add NO_STAGE all over the place in preparation for the staging support (cat:
devel part 3) |
2.3
11 Jun 2012 11:30:24
|
culot |
- Update to 2.3 [1]
- Mark it Python3 ready
Changes: http://nedbatchelder.com/code/cog/changes.html
PR: ports/168367 [1]
Submitted by: koobs <koobs.freebsd@gmail.com>
Approved by: maintainer timeout (>14 days) |
2.2
12 Apr 2011 03:59:57
|
miwi |
- Update to 2.2
PR: 155527
Submitted by: Maintainer |
2.1
27 Feb 2009 12:36:46
|
lwhsu |
- Update to 2.1
PR: ports/131263
Submitted by: lwhsu
Approved by: Alexey Pesternikov <paster@page2rss.com> (maintainer) |
2.0
01 Feb 2009 18:42:56
|
lwhsu |
- Fix fetch
Reported by: -fetch-original pointyhat run |
2.0
13 Apr 2007 16:42:45
|
nivit |
Cog transforms files in a very simple way: it finds chunks of Python code
embedded in them, executes the Python code, and inserts its output back into
the original file. The file can contain whatever text you like around the
Python code. It will usually be source code.
Author: Ned Batchelder
WWW: http://www.nedbatchelder.com/code/cog/index.html
PR: ports/111046
Submitted by: Alex Pesternikov <apesternikov at page2rss.com> |
As an Amazon Associate I earn from qualifying purchases.