devel/py-jaraco.functools: Update to 4.1.0

Changes:	https://github.com/jaraco/jaraco.functools/blob/main/NEWS.rst

devel/py-jaraco.functools: Update to 4.0.2

Changes:	https://github.com/jaraco/jaraco.functools/blob/main/NEWS.rst

devel/py-jaraco.functools: Update to 4.0.1

Changes:	https://github.com/jaraco/jaraco.functools/blob/main/NEWS.rst

devel/py-setuptools-scm: update to 8.0.4

Directory and PORTNAME changed to match normalised name in release
tarball; consumers updated to match.

Although setuptools itself is specified as a run dependency in the
Python package metadata, it is currently left out here to prevent
environment pollution until at least PR 270510 is committed.
Additionally, this version of setuptools-scm requires setuptools>=61,
which means this version is only meant for USE_PYTHON=pep517 ports
as all USE_PYTHON=distutils ports will switch to devel/py-setuptools58
also after PR 270510. science/py-emmet-core is switched to
devel/py-setuptools_scm7 accordingly, as it specifies setuptools-scm<8.
devel/py-{flit-scm,hatch-vcs} have ${PY_SETUPTOOLS} added to
RUN_DEPENDS to compensate.

Further details: https://wiki.freebsd.org/Python/setuptools

Reported by: yuri
Co-authored by: matthew
Exp-run by: antoine (earlier iteration)
Approved by: yuri (science/py-emmet-core, previous iteration)
PR: 272134
Differential Revision: https://reviews.freebsd.org/D39288

devel/py-jaraco.functools: Update to 4.0.0

Changes:	https://github.com/jaraco/jaraco.functools/blob/main/NEWS.rst

devel/py-jaraco.functools: Update to 3.9.0

Changes:	https://github.com/jaraco/jaraco.functools/blob/main/NEWS.rst

devel/py-jaraco.functools: Update to 3.8.1

- Remove py-jaraco from RUN_DEPENDS

Changes:	https://github.com/jaraco/jaraco.functools/blob/main/NEWS.rst

devel/py-setuptools: convert individual consumers to ${PY_SETUPTOOLS}

Currently a no-op, but in the future outputs the correct setuptools
port depending on whether USES_PYTHON=distutils is specified.

With hat: python
PR: 270510, 270358

devel/py-jaraco.functools: Update to 3.8.0

Changes:	https://github.com/jaraco/jaraco.functools/blob/main/NEWS.rst

all: remove explicit versions in USES=python for "3.x+"

The logic in USES=python will automatically convert this to 3.8+ by
itself.

Adjust two ports that only had Python 3.7 mentioned but build fine
on Python 3.8 too.

finance/quickfix: mark BROKEN with PYTHON

libtool: compile:  c++ -DHAVE_CONFIG_H -I. -I../.. -I -I. -I.. -I../.. -I../C++
-DLIBICONV_PLUG -DPYTHON_MAJOR_VERSION=3 -Wno-unused-variable
-Wno-maybe-uninitialized -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong
-fno-strict-aliasing -DLIBICONV_PLUG -Wall -ansi
-Wno-unused-command-line-argument -Wpointer-arith -Wwrite-strings
-Wno-overloaded-virtual -Wno-deprecated-declarations -Wno-deprecated -std=c++0x
-MT _quickfix_la-QuickfixPython.lo -MD -MP -MF
.deps/_quickfix_la-QuickfixPython.Tpo -c QuickfixPython.cpp  -fPIC -DPIC -o
.libs/_quickfix_la-QuickfixPython.o
warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean
'-Wno-uninitialized'? [-Wunknown-warning-option]
QuickfixPython.cpp:175:11: fatal error: 'Python.h' file not found
          ^~~~~~~~~~
1 warning and 1 error generated.

Reviewed by:	portmgr, vishwin, yuri
Differential Revision:	<https://reviews.freebsd.org/D40568>

devel/py-jaraco.functools: Update to 3.7.0

Changes:	https://github.com/jaraco/jaraco.functools/blob/main/CHANGES.rst

devel/py-jaraco.functools: Update to 3.6.0

Changes:	https://github.com/jaraco/jaraco.functools/blob/main/CHANGES.rst

USE_PYTHON=pep517: bump PORTREVISION

devel/py-jaraco.functools: Convert to USE_PYTHON=pep517

- Bump PORTREVISION for dependency and package change

*/*: rename CHEESESHOP to PYPI in MASTER_SITES

PR:			267994
Differential revision:	D37518
Approved by:		bapt

devel/py-jaraco.functools: Update to 3.5.2

Changes:	https://github.com/jaraco/jaraco.functools/blob/main/CHANGES.rst

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

devel: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  "Waitman Gobble" <uzimac@da3m0n8t3r.com>
  *  <jkoshy@FreeBSD.org>
  *  Aaron Dalton <aaron@FreeBSD.org>
  *  Aaron Dalton <aaron@daltons.ca>
  *  Aaron H. K. Diep <ahkdiep@gmail.com>
  *  Aaron Hurt <ahurt@anbcs.com>
  *  Abel Chow <abel_chow@yahoo.com>
  *  Adam McLaurin
  *  Adam Saponara <as@php.net>
  *  Adam Weinberger <adamw@FreeBSD.org>
  *  Ade Lovett <ade@FreeBSD.org>

devel/py-jaraco.functools: Update to 3.5.1

Changes:	https://github.com/jaraco/jaraco.functools/blob/main/CHANGES.rst

devel/py-jaraco.functools: Convert to USE_PYTHON=pytest

devel/py-jaraco.functools: unbreak egg version after 87dd5acfed55

$ flexget
Traceback (most recent call last):
  File "/usr/local/lib/python3.8/site-packages/pkg_resources/__init__.py", line
568, in _build_master
    ws.require(__requires__)
  File "/usr/local/lib/python3.8/site-packages/pkg_resources/__init__.py", line
886, in require
    needed = self.resolve(parse_requirements(requirements))
  File "/usr/local/lib/python3.8/site-packages/pkg_resources/__init__.py", line
777, in resolve
    raise VersionConflict(dist, req).with_context(dependent_req)
pkg_resources.ContextualVersionConflict: (jaraco.functools 0.0.0
(/usr/local/lib/python3.8/site-packages),
Requirement.parse('jaraco.functools>=1.20'), {'tempora'})

devel/py-jaraco.functools: Update to 3.5.0

Changes:	https://github.com/jaraco/jaraco.functools/blob/main/CHANGES.rst

devel/py-jaraco.functools: Update to 3.4.0

Changes:	https://github.com/jaraco/jaraco.functools/blob/main/CHANGES.rst

devel/py-jaraco.functools: Update to 3.3.0

Changes:	https://github.com/jaraco/jaraco.functools/blob/main/CHANGES.rst

Remove # $FreeBSD$ from Makefiles.

Update to 3.2.1

Changes:	https://github.com/jaraco/jaraco.functools/blob/main/CHANGES.rst

Update to 3.2.0

Changes:	https://github.com/jaraco/jaraco.functools/blob/main/CHANGES.rst

Update to 3.1.0

Changes:	https://github.com/jaraco/jaraco.functools/blob/main/CHANGES.rst

Convert to test framework

Update to 3.0.1

Changes:	https://github.com/jaraco/jaraco.functools/blob/master/CHANGES.rst

Update to 3.0.0

Changes:	https://github.com/jaraco/jaraco.functools/blob/master/CHANGES.rst

- Cosmetic change

Change RUN_DEPENDS from py-more-itertools to py-more-itertools5 conditionally

- Bump PORTREVISION for dependency change

Fix build with Python 3

Update to 2.0

Changes:	https://github.com/jaraco/jaraco.functools/blob/master/CHANGES.rst

Update to 1.20

- Add NO_ARCH

Changes:	https://github.com/jaraco/jaraco.functools/blob/master/CHANGES.rst

Take maintainership

Reset maintainer on my python ports

- Update to 1.19

Changes by upstream:
- https://github.com/jaraco/jaraco.functools/compare/1.8.1...1.19

Changes to the port:
- Added LICENSE_FILE
- Changed RUN_DEPENDS/BUILD_DEPENDS to match the new dependencies
- Changed WWW

PR:		229476
Submitted by:	freebsd_ports@k-worx.org
Approved by:	maintainer
Sponsored by:	iXsystems Inc.

Use PY_FLAVOR for dependencies.

FLAVOR is the current port's flavor, it should not be used outside of
this scope.

Sponsored by:	Absolight

Switch all pypi.python.org WWWs to a new PyPi home pypi.org where
they now redirect to anyway. All new urls checked to return 200,
I've fixed a couple of them in the process.

Approved by:	portmgr blanket, mat

Convert Python ports to FLAVORS.

  Ports using USE_PYTHON=distutils are now flavored.  They will
  automatically get flavors (py27, py34, py35, py36) depending on what
  versions they support.

  There is also a USE_PYTHON=flavors for ports that do not use distutils
  but need FLAVORS to be set.  A USE_PYTHON=noflavors can be set if
  using distutils but flavors are not wanted.

  A new USE_PYTHON=optsuffix that will add PYTHON_PKGNAMESUFFIX has been
  added to cope with Python ports that did not have the Python
  PKGNAMEPREFIX but are flavored.

  USES=python now also exports a PY_FLAVOR variable that contains the

Additional functools in the spirit of stdlib's functools.

WWW: https://pypi.python.org/pypi/jaraco.text