devel/py-path: Update to 17.1.0

Changes:	https://github.com/jaraco/path/blob/main/NEWS.rst

devel/py-path: Update to 17.0.0

Changes:	https://github.com/jaraco/path/blob/main/NEWS.rst

devel/py-path: Update to 16.16.0

Changes:	https://github.com/jaraco/path/blob/main/NEWS.rst

devel/py-path: Update to 16.14.0

Changes:	https://github.com/jaraco/path/blob/main/NEWS.rst

devel/py-path: Update to 16.13.0

Changes:	https://github.com/jaraco/path/blob/main/NEWS.rst

devel/py-path: Update to 16.12.1

Changes:	https://github.com/jaraco/path/blob/main/NEWS.rst

devel/py-path: Update to 16.11.0

- Remove PY_SETUPTOOLS: py-setuptools should be used rather than PY_SETUPTOOLS

Changes:	https://github.com/jaraco/path/blob/main/NEWS.rst

devel/py-setuptools-scm: update to 8.0.4

Directory and PORTNAME changed to match normalised name in release
tarball; consumers updated to match.

Although setuptools itself is specified as a run dependency in the
Python package metadata, it is currently left out here to prevent
environment pollution until at least PR 270510 is committed.
Additionally, this version of setuptools-scm requires setuptools>=61,
which means this version is only meant for USE_PYTHON=pep517 ports
as all USE_PYTHON=distutils ports will switch to devel/py-setuptools58
also after PR 270510. science/py-emmet-core is switched to
devel/py-setuptools_scm7 accordingly, as it specifies setuptools-scm<8.
devel/py-{flit-scm,hatch-vcs} have ${PY_SETUPTOOLS} added to
RUN_DEPENDS to compensate.

Further details: https://wiki.freebsd.org/Python/setuptools

Reported by: yuri
Co-authored by: matthew
Exp-run by: antoine (earlier iteration)
Approved by: yuri (science/py-emmet-core, previous iteration)
PR: 272134
Differential Revision: https://reviews.freebsd.org/D39288

devel/py-path: Update to 16.10.0

Changes:	https://github.com/jaraco/path/blob/main/NEWS.rst

devel/py-path: Update to 16.9.0

Changes:	https://github.com/jaraco/path/blob/main/NEWS.rst

devel/py-setuptools: convert individual consumers to ${PY_SETUPTOOLS}

Currently a no-op, but in the future outputs the correct setuptools
port depending on whether USES_PYTHON=distutils is specified.

With hat: python
PR: 270510, 270358

devel/py-path: Update to 16.7.1

Changes:	https://github.com/jaraco/path/blob/main/NEWS.rst

all: remove explicit versions in USES=python for "3.x+"

The logic in USES=python will automatically convert this to 3.8+ by
itself.

Adjust two ports that only had Python 3.7 mentioned but build fine
on Python 3.8 too.

finance/quickfix: mark BROKEN with PYTHON

libtool: compile:  c++ -DHAVE_CONFIG_H -I. -I../.. -I -I. -I.. -I../.. -I../C++
-DLIBICONV_PLUG -DPYTHON_MAJOR_VERSION=3 -Wno-unused-variable
-Wno-maybe-uninitialized -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong
-fno-strict-aliasing -DLIBICONV_PLUG -Wall -ansi
-Wno-unused-command-line-argument -Wpointer-arith -Wwrite-strings
-Wno-overloaded-virtual -Wno-deprecated-declarations -Wno-deprecated -std=c++0x
-MT _quickfix_la-QuickfixPython.lo -MD -MP -MF
.deps/_quickfix_la-QuickfixPython.Tpo -c QuickfixPython.cpp  -fPIC -DPIC -o
.libs/_quickfix_la-QuickfixPython.o
warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean
'-Wno-uninitialized'? [-Wunknown-warning-option]
QuickfixPython.cpp:175:11: fatal error: 'Python.h' file not found
          ^~~~~~~~~~
1 warning and 1 error generated.

Reviewed by:	portmgr, vishwin, yuri
Differential Revision:	<https://reviews.freebsd.org/D40568>

USE_PYTHON=pep517: bump PORTREVISION

devel/py-path: Convert to USE_PYTHON=pep517

- Bump PORTREVISION for dependency and package change

devel/py-path: Update to 16.6.0

Changes:	https://github.com/jaraco/path/blob/main/CHANGES.rst

*/*: rename CHEESESHOP to PYPI in MASTER_SITES

PR:			267994
Differential revision:	D37518
Approved by:		bapt

devel/py-path: Update to 16.5.0

Changes:	https://github.com/jaraco/path/blob/main/CHANGES.rst

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

devel: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  "Waitman Gobble" <uzimac@da3m0n8t3r.com>
  *  <jkoshy@FreeBSD.org>
  *  Aaron Dalton <aaron@FreeBSD.org>
  *  Aaron Dalton <aaron@daltons.ca>
  *  Aaron H. K. Diep <ahkdiep@gmail.com>
  *  Aaron Hurt <ahurt@anbcs.com>
  *  Abel Chow <abel_chow@yahoo.com>
  *  Adam McLaurin
  *  Adam Saponara <as@php.net>
  *  Adam Weinberger <adamw@FreeBSD.org>
  *  Ade Lovett <ade@FreeBSD.org>

devel/py-path: Update to 16.4.0

Changes:	https://github.com/jaraco/path/blob/main/CHANGES.rst

devel/py-path: Update to 16.3.0

Changes:	https://github.com/jaraco/path/blob/main/CHANGES.rst

devel/py-path: Update to 16.2.0

Changes:	https://github.com/jaraco/path/blob/main/CHANGES.rst

devel/py-path: Update to 16.0.0

Changes:	https://github.com/jaraco/path/blob/main/CHANGES.rst

Remove # $FreeBSD$ from Makefiles.

Update to 15.1.2

Changes:	https://github.com/jaraco/path/blob/main/CHANGES.rst

Add py-path 15.1.0

path implements path objects as first-class entities, allowing common operations
on files to be invoked on those path objects directly.

WWW: https://github.com/jaraco/path