all: remove explicit versions in USES=python for "3.x+"

The logic in USES=python will automatically convert this to 3.8+ by
itself.

Adjust two ports that only had Python 3.7 mentioned but build fine
on Python 3.8 too.

finance/quickfix: mark BROKEN with PYTHON

libtool: compile:  c++ -DHAVE_CONFIG_H -I. -I../.. -I -I. -I.. -I../.. -I../C++
-DLIBICONV_PLUG -DPYTHON_MAJOR_VERSION=3 -Wno-unused-variable
-Wno-maybe-uninitialized -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong
-fno-strict-aliasing -DLIBICONV_PLUG -Wall -ansi
-Wno-unused-command-line-argument -Wpointer-arith -Wwrite-strings
-Wno-overloaded-virtual -Wno-deprecated-declarations -Wno-deprecated -std=c++0x
-MT _quickfix_la-QuickfixPython.lo -MD -MP -MF
.deps/_quickfix_la-QuickfixPython.Tpo -c QuickfixPython.cpp  -fPIC -DPIC -o
.libs/_quickfix_la-QuickfixPython.o
warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean
'-Wno-uninitialized'? [-Wunknown-warning-option]
QuickfixPython.cpp:175:11: fatal error: 'Python.h' file not found
          ^~~~~~~~~~
1 warning and 1 error generated.

Reviewed by:	portmgr, vishwin, yuri
Differential Revision:	<https://reviews.freebsd.org/D40568>

devel/py-rauth: Add Cryptodome support

PR:		248307
Reported by:	john@saltant.com

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

devel: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  "Waitman Gobble" <uzimac@da3m0n8t3r.com>
  *  <jkoshy@FreeBSD.org>
  *  Aaron Dalton <aaron@FreeBSD.org>
  *  Aaron Dalton <aaron@daltons.ca>
  *  Aaron H. K. Diep <ahkdiep@gmail.com>
  *  Aaron Hurt <ahurt@anbcs.com>
  *  Abel Chow <abel_chow@yahoo.com>
  *  Adam McLaurin
  *  Adam Saponara <as@php.net>
  *  Adam Weinberger <adamw@FreeBSD.org>
  *  Ade Lovett <ade@FreeBSD.org>

devel/py-rauth: Remove DEPRECATION

- Change TEST_DEPENDS to security/py-cryptodome a drop in replacement
  for now defunct security/py-crypto
- Add USE_PYTHON=nose

cleanup: expire consumers of security/py-pycrypto on 2022-09-30

These should probably use security/py-pycryptodome instead.

*/*: Take maintainership

all: return koobs' ports to the pool after safekeeping his commit bit.

Remove # $FreeBSD$ from Makefiles.

Drop python 2.7 support from a few ports

With hat:	portmgr

Use PY_FLAVOR for dependencies.

FLAVOR is the current port's flavor, it should not be used outside of
this scope.

Sponsored by:	Absolight

Convert Python ports to FLAVORS.

  Ports using USE_PYTHON=distutils are now flavored.  They will
  automatically get flavors (py27, py34, py35, py36) depending on what
  versions they support.

  There is also a USE_PYTHON=flavors for ports that do not use distutils
  but need FLAVORS to be set.  A USE_PYTHON=noflavors can be set if
  using distutils but flavors are not wanted.

  A new USE_PYTHON=optsuffix that will add PYTHON_PKGNAMESUFFIX has been
  added to cope with Python ports that did not have the Python
  PKGNAMEPREFIX but are flavored.

  USES=python now also exports a PY_FLAVOR variable that contains the

Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.

With hat:	portmgr
Sponsored by:	Absolight

devel/py-rauth: Update to 0.7.2, Modernize

- Update PORTVERSION and distinfo checksum (0.7.2)
- Add LICENSE_FILE
- Update RUN_DEPENDS (Switch to www/requests from requests1
- Update TEST dependencies and test target
- Remove TESTS options bits accordingly
- Patch setup.py to enable setuptools test command support
- Update pkg-descr based on latest upstream text
- Enable NO_ARCH (architecture independence)

Remove UNIQUENAME and LATEST_LINK.

UNIQUENAME was never unique, it was only used by USE_LDCONFIG and now,
we won't have conflicts there.

Use PKGBASE instead of LATEST_LINK in PKGLATESTFILE, the *only* consumer
is pkg-devel, and it works just fine without LATEST_LINK as pkg-devel
has the correct PKGNAME anyway.

Now that UNIQUENAME is gone, OPTIONSFILE is too. (it's been called
OPTIONS_FILE now.)

Reviewed by:	antoine, bapt
Exp-run by:	antoine
Sponsored by:	Absolight
Differential Revision:	https://reviews.freebsd.org/D3336

Update ports in the [bcd]* categories to not use GH_COMMIT.

With minor cleanups to make things simpler.

With hat:	portmgr
Sponsored by:	Absolight

- Convert ports of devel/ to USES=python

Approved by:	portmgr (implicit)

- Remove easy_install dependency
- Bump PORTREVISION to enforce a cleanup for the easy_install references

With hat:	python@
Approved by:	portmgr (implicit)

Sweep www/py-requests dependants to www/py-requests1

Point all www/py-requests dependants to www/py-requests1 in preparation for
the upgrade of www/py-requests to version 2.x, which substantially breaks API
compatibility.

Maintainers of these ports can update their requests dependency independently
as time for sufficient testing permits.

PR:		ports/185631

devel/py-rauth: Update to 0.6.2

- Update to 0.6.2
- Enable STAGE support, delete pkg-plist
- Enable AUTOPLIST support
- Update RUN_DEPENDS minimum version for requests
- Re-order *_DEPENDS and USE_* sections
- Add pycrypto to TEST_DEPENDS

Changes:

 https://github.com/litl/rauth/blob/0.6.2/CHANGELOG

Add NO_STAGE all over the place in preparation for the staging support (cat:
devel part 3)

devel/py-rauth: Update to 0.5.4

- Update minimum version for py-requests
- Include minimum versions for py-mock and py-nose

Changes: https://github.com/litl/rauth/blob/0.5.4/CHANGELOG

Approved by:	eadler, rm (mentors, implicit)

distinfo was missing PORTNAME, fix it.

Mental Note: dont play with bsd.sites.mk while your mentee patch is in review

Approved by:	eadler (mentor)

- Update to 0.5.1
- Update and sort pkg-plist
- Tweak COMMENT according to standards
- Tab->space in pkg-descr

Approved by:	eadler (mentor)

Update MAINTAINER address for all my ports. While I'm here,
standardise and canonicalise Makefile header format and contents.

Approved by:	eadler (mentor)

Update to 0.4.17.
Switch to github.
Add tests.

PR:		ports/173855
Submitted by:	Kubilay Kocak <koobs.freebsd@gmail.com> (maintainer)
Feature safe:	yes

- update to 0.4.15
- tab -> space in pkg-descr:WWW, while here

PR:		170665
Submitted by:	Kubilay Kocak <koobs.freebsd at gmail dot com> (maintainer)

- Update to 0.4.14

PR:		ports/170272
Submitted by:	Kubilay Kocak <koobs.freebsd@gmail.com> (maintainer)

This package provides OAuth 1.0/a, 2.0, and Ofly consumer support. The
package is wrapped around the superb Python Requests.

- Built on Python-Requests
- Supports OAuth 1.0, 1.0a, 2.0 and Ofly]
- Service wrappers for convenient connection initialization
- Well tested (100% coverage)

WWW:    https://github.com/litl/rauth

PR:             168802
Submitted by:   koobs <koobs.freebsd at gmail dot com>