devel/py-twine: Allow build with py-pkginfo 1.11+

- Bump PORTREVISION for package change

devel/py-twine: Update to 5.1.1

Changes:	https://github.com/pypa/twine/releases
		https://github.com/pypa/twine/blob/main/docs/changelog.rst
		https://twine.readthedocs.io/en/stable/changelog.html

devel/py-twine: Update to 5.1.0

Changes:	https://github.com/pypa/twine/releases
		https://github.com/pypa/twine/blob/main/docs/changelog.rst
		https://twine.readthedocs.io/en/stable/changelog.html

devel/py-twine: Remove PY_SETUPTOOLS

py-setuptools should be used rather than PY_SETUPTOOLS

devel/py-setuptools-scm: update to 8.0.4

Directory and PORTNAME changed to match normalised name in release
tarball; consumers updated to match.

Although setuptools itself is specified as a run dependency in the
Python package metadata, it is currently left out here to prevent
environment pollution until at least PR 270510 is committed.
Additionally, this version of setuptools-scm requires setuptools>=61,
which means this version is only meant for USE_PYTHON=pep517 ports
as all USE_PYTHON=distutils ports will switch to devel/py-setuptools58
also after PR 270510. science/py-emmet-core is switched to
devel/py-setuptools_scm7 accordingly, as it specifies setuptools-scm<8.
devel/py-{flit-scm,hatch-vcs} have ${PY_SETUPTOOLS} added to
RUN_DEPENDS to compensate.

Further details: https://wiki.freebsd.org/Python/setuptools

Reported by: yuri
Co-authored by: matthew
Exp-run by: antoine (earlier iteration)
Approved by: yuri (science/py-emmet-core, previous iteration)
PR: 272134
Differential Revision: https://reviews.freebsd.org/D39288

devel/py-twine: Update to 5.0.0

Changes:	https://github.com/pypa/twine/releases
		https://github.com/pypa/twine/blob/main/docs/changelog.rst
		https://twine.readthedocs.io/en/stable/changelog.html

devel/py-setuptools: convert individual consumers to ${PY_SETUPTOOLS}

Currently a no-op, but in the future outputs the correct setuptools
port depending on whether USES_PYTHON=distutils is specified.

With hat: python
PR: 270510, 270358

all: remove explicit versions in USES=python for "3.x+"

The logic in USES=python will automatically convert this to 3.8+ by
itself.

Adjust two ports that only had Python 3.7 mentioned but build fine
on Python 3.8 too.

finance/quickfix: mark BROKEN with PYTHON

libtool: compile:  c++ -DHAVE_CONFIG_H -I. -I../.. -I -I. -I.. -I../.. -I../C++
-DLIBICONV_PLUG -DPYTHON_MAJOR_VERSION=3 -Wno-unused-variable
-Wno-maybe-uninitialized -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong
-fno-strict-aliasing -DLIBICONV_PLUG -Wall -ansi
-Wno-unused-command-line-argument -Wpointer-arith -Wwrite-strings
-Wno-overloaded-virtual -Wno-deprecated-declarations -Wno-deprecated -std=c++0x
-MT _quickfix_la-QuickfixPython.lo -MD -MP -MF
.deps/_quickfix_la-QuickfixPython.Tpo -c QuickfixPython.cpp  -fPIC -DPIC -o
.libs/_quickfix_la-QuickfixPython.o
warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean
'-Wno-uninitialized'? [-Wunknown-warning-option]
QuickfixPython.cpp:175:11: fatal error: 'Python.h' file not found
          ^~~~~~~~~~
1 warning and 1 error generated.

Reviewed by:	portmgr, vishwin, yuri
Differential Revision:	<https://reviews.freebsd.org/D40568>

USE_PYTHON=pep517: bump PORTREVISION

devel/py-twine: Convert to USE_PYTHON=pep517

- Bump PORTREVISION for dependency and package change

devel/py-twine: Update to 4.0.2

Changes:	https://github.com/pypa/twine/releases
		https://github.com/pypa/twine/blob/main/docs/changelog.rst
		https://twine.readthedocs.io/en/stable/changelog.html

*/*: rename CHEESESHOP to PYPI in MASTER_SITES

PR:			267994
Differential revision:	D37518
Approved by:		bapt

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

devel: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  "Waitman Gobble" <uzimac@da3m0n8t3r.com>
  *  <jkoshy@FreeBSD.org>
  *  Aaron Dalton <aaron@FreeBSD.org>
  *  Aaron Dalton <aaron@daltons.ca>
  *  Aaron H. K. Diep <ahkdiep@gmail.com>
  *  Aaron Hurt <ahurt@anbcs.com>
  *  Abel Chow <abel_chow@yahoo.com>
  *  Adam McLaurin
  *  Adam Saponara <as@php.net>
  *  Adam Weinberger <adamw@FreeBSD.org>
  *  Ade Lovett <ade@FreeBSD.org>

devel/py-twine: Update to 4.0.1

Changes:	https://github.com/pypa/twine/releases
		https://github.com/pypa/twine/blob/main/docs/changelog.rst
		https://twine.readthedocs.io/en/stable/changelog.html

devel/py-twine: Update to 4.0.0

Changes:	https://github.com/pypa/twine/releases
		https://github.com/pypa/twine/blob/main/docs/changelog.rst
		https://twine.readthedocs.io/en/stable/changelog.html

devel/py-twine: Update to 3.8.0

Changes:	https://github.com/pypa/twine/releases
		https://github.com/pypa/twine/blob/main/docs/changelog.rst
		https://twine.readthedocs.io/en/stable/changelog.html

devel/py-twine: Update to 3.7.1

Changes:	https://github.com/pypa/twine/releases
		https://github.com/pypa/twine/blob/main/docs/changelog.rst
		https://twine.readthedocs.io/en/stable/changelog.html

devel/py-twine: Update to 3.7.0

Changes:	https://github.com/pypa/twine/blob/main/docs/changelog.rst

devel/py-twine: Update to 3.6.0

Changes:	https://github.com/pypa/twine/blob/main/docs/changelog.rst

devel/py-twine: Update to 3.5.0

Changes:	https://github.com/pypa/twine/blob/main/docs/changelog.rst

devel/py-twine: Update to 3.4.2

Changes:	https://github.com/pypa/twine/blob/main/docs/changelog.rst

Mk: switch PYTHON_REL to 5 digits to support python 3.10.x

PR:		255013
Differential Revision:	https://reviews.freebsd.org/D29418
Exp-run by:	antoine
Approved by:	wen@, no objection from python@ or portmgr@

devel/py-twine: Update RUN_DEPENDS after
f043e2bdfd2063a32f59a9100cfc80bd3a580f7a

Remove # $FreeBSD$ from Makefiles.

Update to 3.3.0

Changes:	https://github.com/pypa/twine/blob/master/docs/changelog.rst

Move devel/py-readme_renderer to devel/py-readme-renderer

- Bump PORTREVISION for dependency change

Update to 3.2.0

Changes:	https://github.com/pypa/twine/blob/master/docs/changelog.rst

Update to 3.1.1

Changes:	https://github.com/pypa/twine/releases
		https://github.com/pypa/twine/blob/master/docs/changelog.rst

Update to 2.0.0

Changes:	https://github.com/pypa/twine/releases
		https://github.com/pypa/twine/blob/master/docs/changelog.rst

Update to 1.15.0

Changes:	https://github.com/pypa/twine/blob/master/docs/changelog.rst

Update to 1.14.0

Changes:	https://github.com/pypa/twine/blob/master/docs/changelog.rst

Bump a few PORTREVISIONs after r498529

With hat:	portmgr

Update to 1.13.0

Changes:	https://github.com/pypa/twine/blob/master/docs/changelog.rst

Update to 1.12.1

- Update WWW
- Take maintainership

Changes:	https://github.com/pypa/twine/blob/master/docs/changelog.rst

Return tj's ports to the pool after his commit bit got safekept.

- Update to 1.11.0

PR:	227843
Submitted by:	freebsd_ports@k-worx.org
Approved by:	maintainer timeout
Sponsored by:	iXsystems Inc.

Switch all pypi.python.org WWWs to a new PyPi home pypi.org where
they now redirect to anyway. All new urls checked to return 200,
I've fixed a couple of them in the process.

Approved by:	portmgr blanket, mat

Convert Python ports to FLAVORS.

  Ports using USE_PYTHON=distutils are now flavored.  They will
  automatically get flavors (py27, py34, py35, py36) depending on what
  versions they support.

  There is also a USE_PYTHON=flavors for ports that do not use distutils
  but need FLAVORS to be set.  A USE_PYTHON=noflavors can be set if
  using distutils but flavors are not wanted.

  A new USE_PYTHON=optsuffix that will add PYTHON_PKGNAMESUFFIX has been
  added to cope with Python ports that did not have the Python
  PKGNAMEPREFIX but are flavored.

  USES=python now also exports a PY_FLAVOR variable that contains the

Rename python setuptools ports to better match other python ports

Reviewed by:	mat, sunpoet
With hat:	portmgr
Differential Revision:	https://reviews.freebsd.org/D9983

Update to 1.8.1

Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.

With hat:	portmgr
Sponsored by:	Absolight

New port devel/py-twine 1.6.5

Twine is a utility for interacting with PyPI.

WWW: https://pypi.python.org/pypi/twine