devel/py-yappi: Convert to USE_PYTHON=pep517

- Bump PORTREVISION for package change

all: remove explicit versions in USES=python for "3.x+"

The logic in USES=python will automatically convert this to 3.8+ by
itself.

Adjust two ports that only had Python 3.7 mentioned but build fine
on Python 3.8 too.

finance/quickfix: mark BROKEN with PYTHON

libtool: compile:  c++ -DHAVE_CONFIG_H -I. -I../.. -I -I. -I.. -I../.. -I../C++
-DLIBICONV_PLUG -DPYTHON_MAJOR_VERSION=3 -Wno-unused-variable
-Wno-maybe-uninitialized -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong
-fno-strict-aliasing -DLIBICONV_PLUG -Wall -ansi
-Wno-unused-command-line-argument -Wpointer-arith -Wwrite-strings
-Wno-overloaded-virtual -Wno-deprecated-declarations -Wno-deprecated -std=c++0x
-MT _quickfix_la-QuickfixPython.lo -MD -MP -MF
.deps/_quickfix_la-QuickfixPython.Tpo -c QuickfixPython.cpp  -fPIC -DPIC -o
.libs/_quickfix_la-QuickfixPython.o
warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean
'-Wno-uninitialized'? [-Wunknown-warning-option]
QuickfixPython.cpp:175:11: fatal error: 'Python.h' file not found
          ^~~~~~~~~~
1 warning and 1 error generated.

Reviewed by:	portmgr, vishwin, yuri
Differential Revision:	<https://reviews.freebsd.org/D40568>

*/*: rename CHEESESHOP to PYPI in MASTER_SITES

PR:			267994
Differential revision:	D37518
Approved by:		bapt

devel/py-yappi: Update to 1.4.0

Changes:	https://github.com/sumerc/yappi/releases
		https://github.com/sumerc/yappi/blob/master/CHANGELOG

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

devel/py-yappi: Update to 1.3.6

Changes:	https://github.com/sumerc/yappi/blob/master/CHANGELOG

devel: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  "Waitman Gobble" <uzimac@da3m0n8t3r.com>
  *  <jkoshy@FreeBSD.org>
  *  Aaron Dalton <aaron@FreeBSD.org>
  *  Aaron Dalton <aaron@daltons.ca>
  *  Aaron H. K. Diep <ahkdiep@gmail.com>
  *  Aaron Hurt <ahurt@anbcs.com>
  *  Abel Chow <abel_chow@yahoo.com>
  *  Adam McLaurin
  *  Adam Saponara <as@php.net>
  *  Adam Weinberger <adamw@FreeBSD.org>
  *  Ade Lovett <ade@FreeBSD.org>

devel/py-yappi: Convert to USE_PYTHON=unittest

devel/py-yappi: Update to 1.3.5

Changes:	https://github.com/sumerc/yappi/blob/master/CHANGELOG

devel/py-yappi: Update to 1.3.3

Changes:	https://github.com/sumerc/yappi/blob/master/CHANGELOG
		https://github.com/sumerc/yappi/commits/master

Remove # $FreeBSD$ from Makefiles.

Drop python 2.7 support from a few ports

With hat:	portmgr

Relax hardcoded paths to fix build with Python 3.8.7

Since r558913 Python 3.8 incorporates BPO-42604 [1] which changed the
shared libs naming scheme.  This means "EXT_SUFFIX" is now derived from
SOABI and yields with Python 3.8 to ".cpython-38.so" instead of ".so".

The affected ports strip the libaries in the "post-install" target via
hardcoded path(s) and the build fails at the end because the new extension
is not expected at this place.

Remedy the issue by adding wildcards to these paths.  This should also
prepare the ports for future Python releases, which will use the new shared
libs naming scheme.

[1] https://bugs.python.org/issue42604

PR:		252057
Reported by:	John Kennedy
Reviewed by:	fluffy, koobs
Approved by:	koobs (python)

Update to 1.3.2

Changes:	https://github.com/sumerc/yappi/blob/master/CHANGELOG

Update to 1.3.1

Changes:	https://github.com/sumerc/yappi/blob/master/CHANGELOG

Update to 1.3.0

Changes:	https://github.com/sumerc/yappi/blob/master/CHANGELOG

Update to 1.2.5

Changes:	https://github.com/sumerc/yappi/blob/master/CHANGELOG

Update to 1.2.4

Changes:	https://github.com/sumerc/yappi/blob/master/CHANGELOG

Update to 1.2.3

- Add LICENSE_FILE

Changes:	https://github.com/sumerc/yappi/commits/master

Bump a few PORTREVISIONs after r498529

With hat:	portmgr

Update to 1.0

Changes:	https://github.com/sumerc/yappi/commits/master

Fix build with Python 3

Obtained
from:	https://github.com/sumerc/yappi/commit/778829f6f77928e4292e6a7dd4dfecf501f9a362

Update to 0.99

- Remove unneeded DOCS option
- Update WWW

Changes:	https://github.com/sumerc/yappi/commits/master

Switch all pypi.python.org WWWs to a new PyPi home pypi.org where
they now redirect to anyway. All new urls checked to return 200,
I've fixed a couple of them in the process.

Approved by:	portmgr blanket, mat

Clean up Makefile

- Do not silence installation messages
- Add Bitbucket repository to WWW
- Take maintainership

Give xmj@'s ports back to the pool

PR:		226157
Submitted by:	xmj

Canonicalize PyPi WWWs:
- Switch to https://
- Remove trailing slashes

Approved by:	portmgr blanket

- Update to 0.98
- Remove erroneoums NO_ARCH, this installs shared library

PR:		215262
Submitted by:	xmj@FreeBSD.org
Approved by:	maintainer timeout (johannes@perceivon.net, 6 weeks)

Change all occurrences of xmj@chaot.net to johannes@perceivon.net as the owner
requested.

This only affects "Created by" lines with one exception: devel/uclcmd. There the
maintainer is changed. This was overlooked in r416918.

Approved by: junovitch (mentor)

Change MAINTAINER from xmj@FreeBSD.org to johannes@perceivon.net

PR:           210265
Submitted by: Johannes Jost Meixner (johannes@perceivon.net)
Approved by:  pi (mentor)

Several ports: Change MAINTAINER from xmj@chaot.net to xmj@FreeBSD.org

PR:		209746
Submitted by:	xmj

devel/py-yappi: Update to 0.94

* Update PORTVERSION and distinfo checksum (0.94) [1]
* Enable USE_PYTHON=concurrent support
* Add NO_ARCH
* Convert DOCS post-install target to OPTION helper
* Add do-test target. PyPI sdist doesn't currently contain tests [1]
* Strip shared library

[1] https://bitbucket.org/sumerc/yappi/issues/7

Based on:

PR:		205113 [1]
Submitted by:	Johannes Jost Meixner <xmj chaot net> [1]

- Convert ports of devel/ to USES=python

Approved by:	portmgr (implicit)

devel/py-yappi: upgrade to 0.92
- Upgrade to 0.92
- Upstream doesn't use ez_setup.py anymore;
  cleanup Makefile and deprecate files/

Approved by: swills (mentor)

[NEW PORT] devel/py-yappi: Yet Another Python Profiler

Yappi is designed to work on long-running multi-threaded applications.

It is possible to profile an application, retrieve statistics, then stop and
start later on the fly without affecting the profiled application.

WWW: https://pypi.python.org/pypi/yappi/

PR:		ports/186157
Submitted by:	Johannes Jost Meixner <xmj@chaot.net>