devel/styx: Re-add port: Scanner/parser generator

Remove expired ports:

2019-10-16 archivers/freetar: Unfetchable, unmaintained
2019-10-16 archivers/hffzip: Unfetchable, unmaintained
2019-10-16 archivers/hpack.non-usa.only: Unfetchable, unmaintained
2019-10-16 archivers/untar: Unfetchable, unmaintained
2019-10-16 astro/gpsdrive: Unfetchable, unmaintained
2019-10-16 astro/planets: Unfetchable, unmaintained
2019-10-16 audio/ascd: Unfetchable, unmaintained
2019-10-16 audio/audiotag: Unfetchable, unmaintained
2019-10-16 audio/gmidimonitor: Unfetchable, unmaintained
2019-10-16 audio/gmpc-lyricwiki: Unfetchable, unmaintained
2019-10-16 audio/jack_mixer: Unfetchable, unmaintained
2019-10-16 audio/jmusic: Unfetchable, unmaintained
2019-10-16 audio/maplay: Unfetchable, unmaintained

Deprecate a few ports

Mark BROKEN: unfetchable

Remove libiconv.so.3 compatibility link that was added in r374303 to
prevent massive PORTREVISION bumps.  Bump dependent ports that have not
been bumped since.

- Fix trailing whitespace in pkg-descrs, categories [a-f]*

Approved by:	portmgr blanket

Backout wrong changes that crept in r415136

Reported by:	danfe

Prevent collision with getline(3)

Convert to USES=autoreconf

Cleanup plist

- Switch to USES=libtool, drop .la files
- Strip libraries
- Fix upstream docs and examples installation

Rename all patches that contain '::' as a path separator, and use
'__' instead.

Support stage

Add NO_STAGE all over the place in preparation for the staging support (cat:
devel part 4)

- Make ports use the libc provided iconv implementation on 10-CURRENT
  after r254273
- Fix a bunch of ports to properly work after this
- Mark converters/libiconv as IGNORE for systems with iconv in libc

Reviewed by:	bapt
Approved by:	portmgr (bapt)
Discussed with:	bapt, bsam (who both contributed ideas and code)

- Convert USE_ICONV=yes to USES=iconv
- Change USE_GNOME=pkgconfig|gnomehack to USES=pathfix|pkgconfig while here

Reviewed by:	bapt, kwm

- Get rid of PTHREAD_CFLAGS and PTHREAD_LIBS (category: devel)

Approved by:	portmgr

- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead

PR:             157936
Submitted by:   myself
Exp-runs by:    pav
Approved by:    pav

-remove MD5

Sync to new bsd.autotools.mk

-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.

It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.

With help:      marcus and kwm
Pointyhat-exp:  a few times by pav
Tested by:      pgollucci, "Romain Tartière" <romain@blogreen.org>, and
                a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by:    marcus
Approved by:    portmgr

- Respect NOPORTEXAMPLES

Reported by:    QA Tindie

Large round of typo fixes in ports/devel (pkg-descr).

Use libtool port instead of included version to avoid objformat a.out botch

- s,INSTALLS_SHLIB,USE_LDCONFIG,g
- these include comms/ converters/ databases/ devel/ maintained by ports@

PR:             ports/101916
Submitted by:   Gea-Suan Lin <gslin_AT_gslin dot org>

Conversion to a single libtool environment.

Approved by:    portmgr (kris)

- Add some SHA256 checksums

Mass-conversion to the USE_AUTOTOOLS New World Order.  The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.

Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.

Preliminary documentation can be found at:
        http://people.FreeBSD.org/~ade/autotools.txt

which is in the process of being SGMLized before introduction into the
Porters Handbook.

Light blue touch-paper.  Run.

change the libtool version to use from 1.3 to 1.5

Apply a big libtool patch to allow porters to use the libtool installed by
the libtoolX ports instead of the one included with each port.  Ports that
set USE_LIBTOOL_VER=X will now use the ports version of libtool instead of
the included version.  To restore previous behavior, use the new macro,
USE_INC_LIBTOOL_VER.  Both macros accept the same argument: a libtool version.

For example, to use the ports version of libtool-1.5, add the following to
your Makefile:

USE_LIBTOOL_VER=        15

To use the included version of libtool with extra hacks provided by
libtool-1.5, add the following to your Makefile:

USE_INC_LIBTOOL_VER=    15

With this change, ports that had to add additional libtool hacks to prevent
.la files from being installed or to fix certain threading issues can now
delete those hacks (after appropriate testing, of course).

PR:             63944
Based on work by:eik and marcus
Approved by:    ade (autotools maintainer)
Tested by:      kris on pointyhat
Bound to be hidden problems:    You bet

Whoa there, boy, that's a mighty big commit y'all have there...

Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".

For ports-in-waiting:

        USE_LIBTOOL=YES         ->      USE_LIBTOOL_VER=13
        USE_AUTOCONF=YES        ->      USE_AUTOCONF_VER=213
        USE_AUTOMAKE=YES        ->      USE_AUTOMAKE_VER=14

Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.

unbreak by upgrading to 1.6.1
utilize USE_ICONV
utilize DOCSDIR && EXAMPLESDIR

BROKEN: Checksum mismatch

Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.

(Part 2)

De-pkg-comment.

upgrade to 1.5.1

PR:             46129
Submitted by:   Ports Fury

Replace ${PERL} with ${REINPLACE_CMD}

PR:             39842
Submitted by:   Oliver Braun <obraun@informatik.unibw-muenchen.de>

- Fix remaining places where giconv used instead of iconv
- Support NOPORTDOCS

PR:             36290
Submitted by:   Ports Fury

Fix another few places where giconv used instead of iconv.

PR:             36059, 36063, 36082
Submitted by:   Joe Marcus Clarke <marcus@marcuscom.com>

Iconv cleanup, stage 2b: remove regex hacks that change iconv.h to giconv.h and
-liconv to -lgiconv.

Bump PORTREVISION to reflect the (lib)iconv upgrade.

Iconv cleanup, stage 1b: correct {BUILD,LIB,RUN}_DEPENDS of all ports that need
libiconv.

upgrade to 1.5
drop maintainership

USE_LIBTOOL implies GNU_CONFIGURE, so remove the latter where appropriate.    

upgrade to 1.4    

add missing "@dirrm include/styx" in pkg-plist    

add styx   A scanner/parser generator