dns/idnkit: Moved man to share/man

Approved by:    portmgr (blanket)

dns/idnkit: try to unbreak the port's build on fresh -CURRENT.

dns/idnkit: Mark BROKEN on 14

Fails to build at configure stage with:
configure: error: can't build runidn, since parameter type list of
getnameinfo() is unknown to configure.

Approved by:	portmgr (blanket)
Sponsored by:	The FreeBSD Foundation

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

dns: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  Aaron Dalton <aaron@FreeBSD.org>
  *  Akinori MUSHA aka knu <knu@idaemons.org>
  *  Alex Samorukov <samm@freebsd.org>
  *  Alexey Dokuchaev <danfe@FreeBSD.org>
  *  Allan Jude <allanjude@freebsd.org>
  *  Amar Takhar <verm@drunkmonk.net>
  *  Anders Nordby <anders@fix.no>
  *  Andrew Greenwood <greenwood.andy@gmail.com>
  *  Anton Berezin <tobez@FreeBSD.org>
  *  Ashish SHUKLA <ashish@FreeBSD.org>
  *  Attila Nagy <bra@fsn.hu>

Remove # $FreeBSD$ from Makefiles.

- Update WWW

- Add LICENSE
- Regenerate patches

PR:		223252
Submitted by:	yasu@utahime.org

Fix build on FreeBSD 10.3 (compiler lacks -R option).

Remove libiconv.so.3 compatibility link that was added in r374303 to
prevent massive PORTREVISION bumps.  Bump dependent ports that have not
been bumped since.

- Switch to options helpers

Cleanup plist

Change INSTALL_DATA to install with mode 644
Remove patches and hacks that were used to work around the previous
situation
This allows to stage more ports as a regular user

Differential Revision:	https://reviews.freebsd.org/D703
Reviewed by and discussed with:	bapt
With hat:	portmgr

dns/idnkit: Fix sample files in pkg-plist

PR:		192631
Submitted by:	michelle

Rename all patches that contain '::' as a path separator, and use
'__' instead.

- Switch to USES=libtool, drop .la files
- Strip libraries

- Add staging support
- Remove leading article from COMMENT
- Define DOCS option

Add NO_STAGE all over the place in preparation for the staging support (cat:
dns)

. introduce ICONV_CONFIGURE_BASE variable at Mk/Uses/iconv.mk. It's value is
  "--with-libiconv=${LOCALBASE}" at systems pre OSVERSION 100043 and "" (null)
  otherwise;
. convert all ports which has CONFIGURE_ARGS=--with-libiconv=${LOCALBASE}.

Approved by:	portmgr (bapt, implicit)

- Convert USE_ICONV=yes to USES=iconv
- Change USE_GNOME=pkgconfig|gnomehack to USES=pathfix|pkgconfig while here

Reviewed by:	bapt, kwm

Style: tab -> space.

Most contributors copy an existing port when writing their own so reduce the
number of bad examples in the tree.

- Get Rid MD5 support

Sync to new bsd.autotools.mk

-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.

It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.

With help:      marcus and kwm
Pointyhat-exp:  a few times by pav
Tested by:      pgollucci, "Romain Tartière" <romain@blogreen.org>, and
                a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by:    marcus
Approved by:    portmgr

Fix the installation with libtool 2.2.

Use libtool port instead of included version to avoid objformat a.out botch

Make it buildable on RELENG_6 after correction of the 2nd argument
of gethostbyaddr(3).

Reported by:    pointyhat via kris

- s,INSTALLS_SHLIB,USE_LDCONFIG,g
- these include dns/ editors/ emulators/ finance/
  games/ graphics/ maintained by ports@

PR:             ports/101916
Submitted by:   Gea-Suan Lin <gslin_AT_gslin dot org>

Remove USE_REINPLACE from all categories starting with D

Conversion to a single libtool environment.

Approved by:    portmgr (kris)

dns/idnkit: runidn does nothing

        nstallbug + non-function

        libidnkutres.la doesn't get installed.
        "Have you installed idnkit?  I cannot find libidnkitres.la."

        When it is copied into /usr/local/lib,
        the errormessage disappears, but there is no function.

At least by making it run, there is a chance that somebody will fix it.

- Add SHA256

Mass-conversion to the USE_AUTOTOOLS New World Order.  The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.

Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.

Preliminary documentation can be found at:
        http://people.FreeBSD.org/~ade/autotools.txt

which is in the process of being SGMLized before introduction into the
Porters Handbook.

Light blue touch-paper.  Run.

With portmgr hat on, reset maintainership of knu's ports since he has
been inactive more than 6 months.  We hope to see him back sometime.

Apply a big libtool patch to allow porters to use the libtool installed by
the libtoolX ports instead of the one included with each port.  Ports that
set USE_LIBTOOL_VER=X will now use the ports version of libtool instead of
the included version.  To restore previous behavior, use the new macro,
USE_INC_LIBTOOL_VER.  Both macros accept the same argument: a libtool version.

For example, to use the ports version of libtool-1.5, add the following to
your Makefile:

USE_LIBTOOL_VER=        15

To use the included version of libtool with extra hacks provided by
libtool-1.5, add the following to your Makefile:

USE_INC_LIBTOOL_VER=    15

With this change, ports that had to add additional libtool hacks to prevent
.la files from being installed or to fix certain threading issues can now
delete those hacks (after appropriate testing, of course).

PR:             63944
Based on work by:eik and marcus
Approved by:    ade (autotools maintainer)
Tested by:      kris on pointyhat
Bound to be hidden problems:    You bet

- Use USE_ICONV knob

Approved by:    portmgr

Add SIZE data.

Submitted by:   trevor

Whoa there, boy, that's a mighty big commit y'all have there...

Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".

For ports-in-waiting:

        USE_LIBTOOL=YES         ->      USE_LIBTOOL_VER=13
        USE_AUTOCONF=YES        ->      USE_AUTOCONF_VER=213
        USE_AUTOMAKE=YES        ->      USE_AUTOMAKE_VER=14

Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.

Add --enable-extra-ace to CONFIGURE_ARGS, which option is required by
VeriSign's IDN Testbed.

Submitted by:   nectar

Massive repo-copies request: net->dns (partly devel->dns)

PR:             ports/56020
Submitted by:   Kimura Fuyuki <fuyuki@nigredo.org>
Approved by:    portmgr