Morla is a RDF editor written in C. It is based on the libnxml and librdf
libraries. With Morla you can manage more RDF documents simultaneously,
visualize graphs and use templates for quick writing.
With Morla you can import RDFS documents and use their contents to write new
RDF triples. Templates are also RDF documents and they make Morla easily
personalizable and expandable.
You can also use Morla as a RDF navigator, wandering among the net knots of
the RDF documents present on Internet exactly as we are used to do with normal
browsers.
===> The following configuration options are available for morla-0.16.1_15:
XULRUNNER=off: Xulrunner as JavaScript engine
===> Use 'make config' to modify these settings
editors/morla: Mark DEPRECATED
- Project is unmaintained
- Last upstream release was in 2011
- Set EXPIRATION_DATE 2024-03-31
Approved by: portmgr (blanket)
*/*: Fix build with llvm16 on 13.2-STABLE
As like as HEAD(14.0-RELEASE) llvm16 was merged in base for 13.2-STABLE
with the OSVERSION 1302507.
- Utilize USE_CXXSTD=c++14 or similar solution where applicable
- Update conditionals to addtionally check for OSVERSION greater than
1302507 and less than 1400000
Approved by: portmgr (blanket)
Sponsored by: The FreeBSD Foundation
editors/morla: Fix build with llvm16
- Add LICENSE GPLv2
- Fix missing DEPENDS
- Utilize USES=localbase while I am here
Approved by: portmgr (blanket)
Sponsored by: The FreeBSD Foundation
accessibility/at-spi2-core: update to 2.46.0
What's new in at-spi2-core 2.46.0:
* Fix GetInterfaces documentation on org.a11y.atspi.Accessible
interface.
What's new in at-spi2-core 2.45.91:
* Send device event controller events using the same signature as other
events.
* Document the Accessible, Action, and Cache dbus interfaces.
* Fix license of atspi-gmain.c (#87).
What's new in at-spi2-core 2.45.90:
* xml: Add some documentation.
* xml: Fix event arguments.
(Only the first 15 lines of the commit message are shown above )
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner)
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
editors: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* Adam Saponara <as@php.net>
* Adam Weinberger <adamw@FreeBSD.org>
* Akinori MUSHA aka knu <knu@idaemons.org>
* Alexey Dokuchaev <danfe@FreeBSD.org>
* Andreas Kohout <shanee@augusta.de>
* Andrej Zverev <az@inec.ru>
* Andrey Zakhvatov
* Anton Tornqvist <antont@inbox.lv>
* Bill Fumerola <billf@chc-chimes.com>
* Bob Eager <bob@eager.cx>
* Chris D. Faulhaber <jedgar@fxp.org>
(Only the first 15 lines of the commit message are shown above )
textproc/libxml2: bump all LIB_DEPENDS consumers
This is a separate commit to facilitate easier cherry-picking for
quarterly.
PR: 262853, 262940, 262877, 263126
Approved by: fluffy (mentor)
textproc/libxml2: bump all dependencies
This should make sure that all dependent ports will pick
up the new version commited with a13ec21cd733f67a9fc0dc00ab45268bdc236246
Remove libxslt.so.2 and libexslt.so.8 compatibility links that were added in
r374303 to prevent massive PORTREVISION bumps. Bump dependent ports that
have not been bumped since.
- Switch textproc/libnxml to USES=libtool, drop .la files
- Switch to USES=pathfix
- Bump dependent ports as .so version has changed
Approved by: portmgr blanket
Convert from USE_GECKO to USES=gecko
While here stagify what was not staged yet
Convert to USES=webplugin where needed and add desktop-file-utils dependency to
icedtea-web
- Remove www/libxul19, is has been vulnerable and unsupported upstream for
quite some time.
- Switch all remaining consumers to depend on www/libxul
- Mark ports that don't work with the new libxul BROKEN
- Mark some old ports DEPRECATED with a reasonable timeout
Approved by: portmgr (miwi)
- Move libxul 1.9.2 to www/libxul19
- Update www/libxul to 10.0.7
- Update all dependent ports to use www/libxul19 (no functional changes)
- Bump PORTREVISION on ports where libxul is a run dependency as the
resulting package will change.
Submitted by: Jan Beich <jbeich@tormail.org>
With hat: gecko
- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead
PR: 157936
Submitted by: myself
Exp-runs by: pav
Approved by: pav
Bump the version of the curl shared library after the ftp/curl update
to 7.19.2.
Bump PORTREVISION, even on the ports that do not have a versioned
dependency, since the binaries will most probably still stop working.
- Update to 0.16
- Add gconf2 to USE_GNOME
- Add WITH_XULRUNNER option (JavaScript engine)
- Remove deprecated value (Application) for key "Categories" in DESKTOP_ENTRIES
Bump portrevision due to upgrade of devel/gettext.
The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).
PR: ports/124340
Submitted by: edwin@
Approved by: portmgr (pav)
Presenting GNOME 2.20.1 and all related works for FreeBSD. The official
GNOME 2.20 release notes can be found at
http://www.gnome.org/start/2.20/notes/en/ . Beyond that, this update
includes the new GIMP 2.4 (courtesy of ahze).
The GNOME 2.20 update also includes a huge change in the FreeBSD GNOME
hierarchy. We are now using the more standard DATADIR of ${PREFIX}/share
rather than ${PREFIX}/share/gnome. The result is that fewer patches and
hacks are needed to port GNOME components to FreeBSD. This will mean some
user changes may be required, so be sure to read /usr/ports/UPDATING for
more details.
This release and the things we accomplished in it would not have been
possible without mezz's crazy idea to collapse DATADIR, and his persistence
to make it happen successfully. Ahze and pav also deserve thanks for
(Only the first 15 lines of the commit message are shown above )
- Set --mandir and --infodir in CONFIGURE_ARGS if the configure script
supports them. This is determined by running ``configure --help'' in
do-configure target and set the shell variable _LATE_CONFIGURE_ARGS
which is then passed to CONFIGURE_ARGS.
- Remove --mandir and --infodir in ports' Makefile where applicable
Few ports use REINPLACE_CMD to achieve the same effect, remove them too.
- Correct some manual pages location from PREFIX/man to MANPREFIX/man
- Define INFO_PATH where necessary
- Document that .info files are installed in a subdirectory relative to
PREFIX/INFO_PATH and slightly change add-plist-info to use INFO_PATH and
subdirectory detection.
PR: ports/111470
Approved by: portmgr
Discussed with: stas (Mk/*), gerald (info related stuffs)
Tested by: pointyhat exp run
Add morla.
Morla is a RDF editor written in C. It is based on the libnxml and librdf
libraries. With Morla you can manage more RDF documents simultaneously,
visualize graphs and use templates for quick writing.
With Morla you can import RDFS documents and use their contents to write new
RDF triples. Templates are also RDF documents and they make Morla easily
personalizable and expandable.
You can also use Morla as a RDF navigator, wandering among the net knots of
the RDF documents present on Internet exactly as we are used to do with normal
browsers.
WWW: http://www2.autistici.org/bakunin/morla/index.php
PR: ports/95542
Submitted by: nivit@email.it (Nicola Vitale)
