Removed unmaintained upstream xemacs ports and dependencies

Add NO_STAGE all over the place in preparation for the staging support (cat:
editors)

Convert from USE_MOTIF to USES=motif

- update png to 1.5.10

Change USE_XPM to USE_XORG

Approved by:    eadler (mentor)
Feature safe:   yes

- Get Rid MD5 support

Sync to new bsd.autotools.mk

Punt autoconf267->autoconf268

Autotools update.   Read ports/UPDATING 20100915 for details.

Approved by:    portmgr (for Mk/bsd.port.mk part)
Tested by:      Multiple -exp runs

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

- update to jpeg-8

- update to jpeg7
Tested by:      pav on pointyhat

Conversion from (now defunct) autoconf-2.61 to autoconf-2.62

Tested by:      exp build run (erwin)

Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)

- Remove unneeded dependency from gtk12/gtk20 [1]
- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Remove X11BASE support in favor of LOCALBASE or PREFIX
- Use USE_LDCONFIG instead of INSTALLS_SHLIB
- Remove unneeded USE_GCC 3.4+

Thanks to all Helpers:
        Dmitry Marakasov, Chess Griffin, beech@, dinoex, rafan, gahr,
        ehaupt, nox, itetcu, flz, pav

PR:             116263
Tested on:      pointyhat
Approved by:    portmgr (pav)

- Avoid corrupting the ~/.emacs file when migrating if it couldn't be fully
  loaded.

See: https://stat.ethz.ch/pipermail/ess-help/2005-September/002851.html.

PR:             ports/114031
Submitted by:   Jason Spiro <jasonspiro4@gmail.com>
Obtained from: 
http://cvs.savannah.gnu.org/viewvc/emacs/emacs/lisp/cus-edit.el?revision=1.321&view=markup

Switch autoconf dependencies from 2.53 or 2.59 to 2.61.

PR:             ports/116639
Submitted by:   aDe

- Set --mandir and --infodir in CONFIGURE_ARGS if the configure script
  supports them.  This is determined by running ``configure --help'' in
  do-configure target and set the shell variable _LATE_CONFIGURE_ARGS
  which is then passed to CONFIGURE_ARGS.
- Remove --mandir and --infodir in ports' Makefile where applicable
  Few ports use REINPLACE_CMD to achieve the same effect, remove them too.
- Correct some manual pages location from PREFIX/man to MANPREFIX/man
- Define INFO_PATH where necessary
- Document that .info files are installed in a subdirectory relative to
  PREFIX/INFO_PATH and slightly change add-plist-info to use INFO_PATH and
  subdirectory detection.

PR:             ports/111470
Approved by:    portmgr
Discussed with: stas (Mk/*), gerald (info related stuffs)
Tested by:      pointyhat exp run

Remove not needed patches.

Update to 21.5-b28 "fuki"

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

Add emacs-22.* to CONFLICTS.

PR:             ports/111814
Submitted by:   NIIMI Satoshi <sa2c@sa2c.net>

Update to 21.5-b27 "fiddleheads"

Remove unneeded patch.

Update to 21.5-b26 "endive".

- Update to 21.5-b25 "eggplant".
- Disable debug options and experimental features for more stabilty and
  improve perfomance.

Bump PORTREVISION on glib12/gtk12 consumer ports to ease the upgrade path.

Discussed with: kris
Approved by:    portmgr (implicit)

Remove "Cache full" warning.

Fix plist.

Reported by:    pointyhat(kris)

Update to 21.5.b24

Replace ugly "@unexec rmdir %D... 2>/dev/null || true" with @dirrmtry

Approved by:    krion@
PR:             ports/88711 (related)

editors/emacs20 does not conflict with other emacsen anymore.

PR:             ports/90478
Submitted by:   NIIMI Satoshi <sa2c@sa2c.net>
Approved by:    sem(mentor)

- Add SHA256

- Fix configure args for WITH_XAW3D

PR:             ports/89253
Submitted by:   Andrey Slusar

Mass-conversion to the USE_AUTOTOOLS New World Order.  The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.

Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.

Preliminary documentation can be found at:
        http://people.FreeBSD.org/~ade/autotools.txt

which is in the process of being SGMLized before introduction into the
Porters Handbook.

Light blue touch-paper.  Run.

Upgrade xemacs-devel to 21.5.b21 "corn" by following upgrade of
xemacs-devel-mule.
Rename patch-ak to patch-unexelf.c after realigning. Changes in patch-ai
were merged.

Add CONFLICTS variable, since this port conflicts with other
emacs/xemacs ports.

Generalize a part of patch-ak to all _LP64 archs. An __alpha__ check is
still needed as cpp on 4-STABLE does not define _LP64 on alpha.
This makes xemacs-devel build sparc64, so remove NOT_FOR_ARCHS. Hopefully
this also fixes things on ia64 (failure there reported by kris).

Remove unneeded patch: configure.in is no longer being patched as
patch-configure.ac takes care of configure.ac.

Remove additional CONFIGURE_ARGS for amd64 added in rev. 1.78. They don't
seem to be necessary any more. This should make plist on amd64 correct
again so unmark BROKEN there.

Fix plist. I erroneously removed ridiculously large amount in previous
commit. That is partly reverted and some further corrections are made.
Make package create lib/xemacs/site-modules directory as port does.
Bump revision to get proper package made.

Pointy hat to:  me

Upgrade to 21.5 beta20 "cilantro" with help from xemacs-devel-mule upgrade
by Andrey Slusar. The same patch-configure.ac is used. Changes in patches
patch-mem-limits.h and patch-emacs.c are solved, but a bit differently in
source so remove them. Autoconf 2.59 is changed which changes a few
configure options names.

Security:       Fixes VuXML 3e3c860d-7dae-11d9-a9e7-0001020eed82

Sort plist.

Remove XAWVER from Xaw3d LIB_DEPENDS re. Xaw3d will be depended upon just
fine without explicit version in there, while specifying it can
occasionally confuse (cf. ports/78527). Packages depend on specific
versions of Xaw3d and X libraries anyway and ports will get the right
version number through imake.

At Kris's request, back out the MACHINE_ARCH spelling correction until
after 5.4-RELEASE.

Assist getting more ports working on AMD64 by obeying the
Ports Collection documentation and use 'ARCH' rather than 'MACHINE_ARCH'.

BROKEN on amd64: Incomplete pkg-plist

Approved by:    portmgr (self)

Bump PORTEPOCH, since PORTVERSION was decreased.

Approved by:    portmgr (implicit)

Revert to 21.5.17 because 21.5.18 was imported without sufficient testing
by yours truely and is causing lots of build problems. I plan to keep
working on 21.5.18 until all the bugs are eliminated.

Approved by:    portsmgr (kris)

BROKEN: Does not build except on i386 5.x

Approved by:    portmgr (self)

It turns out that Andrey Slusar only wants to maintain the xemacs-mule
ports, so make the maintainer ports@.

Forced commit to note that the port was upgraded to 21.5.18.

Update to 21.5.8.

The patches patch-emacs.c and patch-mem-limits.h are no longer needed
because lim_data has been changed from an unsigned int to an unsigned
long, which should be big enough on all architectures which we support.

Make Andrey Slusar <anray AT inet DOT ua> the maintainer, since he kindly
offered to take over this port from me.

Update to 21.5.17.

Add patch-emacs.c to fix  the following problem as quoted from the PR:

The port patches src/mem-limits.h to declare the "lim_data" variable
as rlim_t (a 64-bit type), but src/emacs.c still defines it as an
integer.  This makes the memory limit checking think that there are
zero bytes available.

PR: 69347
Submitted by: Andrew Heybey <ath@niksun.com>

Add patch-regex.c to handle an overflow which is caused by long lines
produced by compile and make output in xemacs.

PR:             ports/62437
Submitted by:   Palle Girgensohn <girgen@pingpong.net>

Also fix this ones Makefile by moving the test for libXm.so more up.

Add a check for ${X11BASE}/lib/libXm.so so that a dependency can be added
on open-motif.

PR:             ports/62401
Submitted by:   Vivek Khera <khera@kcilink.com>

SIZEify (maintainer timeout)

Port to amd64.

Submitted by:   James Van Artsdalen <james-freebsd-amd64 at jrv.org>, gallatin,
kan

Do not allow use of the experimental postgresql module because it breaks
the install.

PR: ports/58444

Xemacs seems to be generally broken on sparc64. Add NOT_FOR_ARCHS=sparc64
to the Makefile.

Upgrade to version 21.5.15.
Fix the version number to eliminate the hyphen as requested in PR
ports/56958. Note that this does not close the PR since there are
other problematical ports listed in it.

Make portlint(1) happy by changing strip to ${STRIP_CMD}

Submitted by:   Oleg Karachevtsev <ok@etrust.ru>
PR:             56998

Update to version 21.5.11.

Remove GTK support until I figure out why it isn't working.

Remove USE_GNOMENG.

Remove pkg-comment and add COMMENT to the Makefile.

Also update distinfo to reflect the update to 21.4.12.

Update to version 2.4.12.

Note that this port is now mis-named - 21.4 is the stable branch and 21.5
is the development branch. 21.1 (in xemacs21) is now "historical".

xemacs21 and xemacs-devel: add a LIB_DEPENDS on compface.1 so that
the mail/faces port cannot be accidentally deleted if xemacs uses it.

xemacs-devel: Add nonas,noeds to the --with-sound line because xemacs-devel
barfs when trying to use our sounds/nas port. Noticed while testing the
fix for the PR.

PR: 44588
Submitted by: Volker Stolz <vs@foldr.org>

Deploy USE_GNOMENG infrastructure

PR:             42197
Submitted by:   Edwin Groothuis <edwin@mavetju.org>

Add patch-al to work around an apparent bug in gcc31 in -current. The
problem was not observed with the gcc in -stable.

The apparent bug results in an endless loop if a certain routine in
lstream.c is inline'd.

Update to 21.4.8.

Add WITHOUT_X11 to allow making these ports without X11 support.   Add
WITH_XAW3D for those who like a 3D look.    

Update to version 21.4.6.    

First round of auto* cleanups:    - USE_AUTO* -> USE_AUTO*_VER=* where required 
  - USE_AUTO* / *_DEPENDS=.*auto*:*/devel/auto* -> GNU_CONFIGURE where OK    -
Other minor changes to fix things    

Since obrien deleted patch-aj from xemacs21, I guess it isn't needed   here
either.    

Style police: WWW tags should either end in a file/script or TRAILING /; Fix the
later case    

Add ``--with-ldap=no'' to the CONFIGURE_ARGS to avoid missing a dependency   in
case the user has LDAP installed. This is one of those things which   are
automatically detected at configure time.    

Update to 21.4.5. The problem with a Lisp error occuring when the user   does a
font change in the Options menu seems to be fixed, although no   change actually
seems to result.    

Use ${WRKDIR} instead of /tmp for the temporary output from sed because   it's
just generally a better idea. Why didn't I think of that ?    

Put tmp_zot (output from sed) into /tmp in case /usr/ports is mounted   read
only.    

Initial checkin of xemacs-devel after xemacs21 was repo copied.