Remove expired ports:
2006-10-01 devel/rtplib
2006-09-01 emulators/linux_base
2006-09-01 emulators/linux_base-debian
2006-09-01 emulators/linux_base-8
2006-09-01 emulators/linux_base-rh-9
2006-10-01 misc/pointless
2006-10-01 www/mediawiki14

Mark deprecated and set expiration time for various reasons:
 - superseeded
 - outdated/EOL
 - no maintainer
 - bitrod

While I'm here add some more conflicts.

Reset maintainership to ports@ after ~4 months without any response to any
PR.

Thanks for contributing.

Since the acroread7 port is a somewhat important port for our users, I
will hand it over to emulation@ if no _active_ *committer* takes it
before the ports freeze.

While I'm here:
 - fix a little nit in the csound port (I think the intention was to
   create no backup file instead of creating one with a "-e" extension)
 - set ARCH to i386 in the amd64 case for the acroread7 port. This
   is a work-around to be able to install everything when a dependency
   is not already installed (ARCH is read-only in sub-makes, so the
   dependencies can't change it). This should be removed when the
   dependencies are fixed or converted to use bsd.linux-rpm.mk. [1]

Not objected to by:     portmgr (explicit: krion; silence: rest)
Maintainer timeout:     ~4 months
Submitted by:           Sangwoo Shim <sangwoos@gmail.com> [1]
PR:                     87985 [1]

Hash with SHA-256.

Remove expired linux_base-6 port.

Set NO_LATEST_LINK.

Remove RESTRICTED line.  Instead tell distributors about the
accompanying source package.

Add needed file.

Noticed by:     Jin-Shan Tseng

Remove unneeded file (I forgot to commit it earlier).

Do not reformat PKGMESSAGE.  I added code that should not be flowed.

Update to 7.3.

Do not touch /compat/linux/dev/ but instead leave that up to the
user (addresses PR 54970).

Take maintainership.

Back out the check for the osf1 module:  when I looked at
src/sys/alpha/linux/linux_sysvec.c I saw that the linux module
depends upon it.

Prompted by:    Daniel O'Connor

On Alpha, the osf1 module must be loaded before the linux module.
Do this.

Add ID tag.

In FreeBSD 4 and later there are no longer separate linuxaout and
linuxelf modules.

Don't use .error -- it breaks 'make index' on sparc64.

Eeeek rev 1.95 accidently backed out rev 1.94; put back.

Quiet installation errors due to lack of /dev/null w/in LINUXBASE.

Totally unravel the "do-patch: NADA" stuff started in rev 1.93.

Properly set owner of yp.conf.

Remove useless "do-patch: NADA" -- the lack of patch-* files is sufficient.

These ports should be using 'ARCH' rather than 'MACHINE_ARCH'.

Submitted by:   kris

Mark forbidden due to X Pixmap parsing bugs in
the XFree86-libs RPM installed by this port.

advisories:
CAN-2004-0687, CAN-2004-0688, CAN-2004-0692,
RHSA-2004-478, CAN-2004-0914, RHSA-2004-612

Fix whitespace after my last commit (portlint).

Update CONFLICTS.

PR:             75283
Submitted by:   linimon

On amd64 we want to use FALLBACK_ELF_MIB as kern.elf32.fallback_brand,
vs. kern.fallback_elf_brand.

First cut at supporting AMD64 (to give 32-bit support).

Minor portlint nit.

SIZEify.

Remove bogus /dev/null check.

Try to mount linproc in post-install.

For i386, use latest glibc and XFree86-libs, and increment PORTREVISION.
Advisories are at <URL:https://rhn.redhat.com/errata/RHSA-2003-286.html>
and <URL:https://rhn.redhat.com/errata/RHSA-2003-325.html>.
Hewlett-Packard has not issued updates for Red Hat 7.2/Alpha.

Sort.

Try to mount and unmount both linproc and linprocfs:  the former
is documented in linprocfs(5) but I have seen and used the latter.

Fix CONFLICTS lines, as requested by eik then petef:

        I think it's a bug that linux_base thinks it conflicts with itself.

--petef

        The problem occurs if you do
          make install; make install FORCE_PKG_REGISTER=yes
        which is somewhat supported, although [seldom] (never?) used.

--eik

Also record conflicts with cle_base.

Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.

(Part 2)

Fix the install by stripping the i386 tag out of DISTFILES.

Reported by:    Stephen Hilton <nospam@hiltonbsd.com>
Tested by:      Stephen Hilton <nospam@hiltonbsd.com>

Remove the two checksums for redhat-release-7.1-1.noarch.rpm from each
distinfo file, and instead fetch this one from from the i386 directory for
both Alpha and i386 architectures.  Based on the previous commit that
duplicated these entries in the plist, these files should be more or
less identical. Note: ftp-master will be updated soon with the correct
distfile. [1]

Also, remove redundant slashes from the jail message. [2]

PR:             61660 [1]
                61697 [2]
Submitted by:   Linh Pham <question@closedsrc.org> [2]

Add WITH_JAIL knob, making it easier to install linux_base in jail.

Add to i386 packing list some directories I missed in the last
XFree86-libs update.

Tidy Alpha packing list.  Most of this is stuff I missed in the
XFree86-libs update.

Noticed by:     kris

Update to the latest XFree86-libs packages.  The security problems
listed in RHSA-2003-064 do not pertain to us AFAICT.  I only tested
this on i386.

ECHO -> ECHO_MSG
(ECHO_CMD for deskutils/notebook)

PR:             ports/56767-56770,56772-56774,56776-56784
Submitted by:   KATO Tsuguru <tkato@prontomail.com>

Register conflicts among linux_base ports.

Lars Eggert reports:

        Installation of linux_base-7.1_2 fails when linprocfs is
        mounted.  Unmounting linprocfs before installing works
        around the issue.

At Lars' suggestion, this script also mounts the linprocfs after
installation.  I assume that if the user has a linprocfs entry in
/etc/fstab, the user wants it to be mounted.  It also seemed like
a good idea to un-mount it before de-installation.

PR:     46172

security update:

        The function gzprintf within zlib, when called with a string
        longer than Z_PRINTF_BUFZISE (= 4096 bytes), can overflow
        without giving a warning.  zlib-1.1.4 and earlier exhibit
        this behavior. There are no known exploits of the gzprintf
        overrun, and only a few programs, including rpm2html and
        gimp-print, are known to use the gzprintf function.  The
        problem has been fixed by checking the length of the output
        string within gzprintf.

--<URL:http://rhn.redhat.com/errata/RHSA-2003-079.html>

Make libstdc++-2.96-112.7.1.i386.rpm to be extracted and included into
package.  libstdc++-2.96 is a core package that is referenced by many
linux_base applications such as linux-eagle.  For instance, linux-eagle
doesn't work with linux_base-7.1_3.

Despite the importance, libstdc++-2.96 has been forgotten to be extracted
since 6 months.  (Actually, the RPM package is listed in the Makefile,
but was badly defined so that no extraction was performed.)

Since linux_base is an important package, I hesitated to commit this
correction (for a long time :).  If there is any incovenience in the
way of package definition, please feel free to correct my change.

For the Alpha, update glibc and un-forbid (untested).

PR:     50313
Submitted by:   Miguel Mendez

For i386, update glibc and for the Alpha, mark forbidden due to
remotely exploitable RPC bug (Red Hat advisory RHSA-2003-089 and
CERT advisory CA-2003-10).

According to <URL:http://www.redhat.com/apps/support/errata/>, "all
errata support for Alpha products, Sparc products, and Powertools
products have reached end of life."

I didn't do proper run-time testing of this, but "make package
deinstall" leaves a clean /compat/linux/ behind.

De-pkg-comment.

Duplicate the two different MD5 checksums for redhat-release-*.rpm
in both distinfo files. The alpha and i386 versions are identical
except for some meta-data.

Requested by: trevor

The previous commit deserved a revision bump.

Acknowledged by: kris

Fix both alpha and i386. The major change is that glibc has been
updated.

Reviewed by: kris

Force links so reinstalls can happen.

On -CURRENT (i386), installation of the bash RPM failed because of
a missing libtermcap.so.2.

The redhat-release-7.1-1.noarch.rpm from Red Hat 7.1/Alpha has a
different MD5 hash from the corresponding package from 7.1/i386.
The contained etc/redhat-release files have the same contents but
different time stamps.  By having both hashes in both distinfo
files, installation can proceed for users who share the same distfile
cache for both architectures.

Due to popular demant into each port which might be inserted into dependency
list by bsd.port.mk insert anti foot-shooting device, which prevents
infinite fork loop when the user defines corresponding USE_XXX in global
make.conf, command line or environment.

Similar devices should probably be inserted into ports that might be inserted
into dependency list by others bsd.foo.mk files (bsd.ruby.mk, bsd.python.mk
and so on.)

Bump PORTREVISION for the glibc update.

Update glibc to 2.2.4-29, to avoid resolver and RPC security bugs.

These should have the resolver bug too.

Forbid because of XDR security bug.

Use MASTER_SITE_REDHAT_LINUX.

Upgrade to Red Hat 7.x support.  Many binary-only packages are now requiring
Red Hat 7.x to run.

This file isn't used any more -- distinfo.{ARCH} is.

Catch up checksums of arch-neutral files to distinfo.i386

Submitted by:   bento

add missing directory.

Reviewed by:    knu (mentor)

Bump PORTREVISION for the zlib update.

Forgotten by:   me
Reported by:    Mike Buchanon <buchanon@mlss15.cl.msu.edu>
PR:             35860

Update for zlib "double free" security bug
(http://www.redhat.com/support/errata/RHSA-2002-026.html).  I only
tested this on i386.

Fix ownership on ${LINUXBASE}/var/spool/mail.    

Pass maintainership over to ports@FreeBSD.org. The linux_base ports   are
getting beyond my control.    

Remove ftp.freesoftware.com from MASTER_SITES of ports since it no longer
exists.    

Chase the directory layout on ftp.redhat.com, no checksum changes.    

Fix unknown uid/gids that come out of the RPMs, to avoid the quotacheck  
warning about unknown owners. Add a reminder in the Makefile, because this   fix
should be removed when a new release of the RPMS fixes the problem.    

`rpm' and `rpm2cpio' have been repocopied from "misc" to "archivers".    

Make this package again on the Alpha.    

Add a .uk master site.    

PREFIX is still needed -- just set it to ${LINUXBASE}.    

The info package seems to be sensitive about the locale   settings and fails to
install if the language is not C.   Override any locale settings when running
rpm.    

Don't enable NIS by default. The example yp.conf file installed   by the port
had actual definitions with bogus values. Comment   out the definitions.    

Replace the locally defined PREFIX (defined as /compat/linux)   by the globally
defined LINUXBASE. Setting DESTDIR on the   command line now does what one
expects.    

Move files/md5.{i386,alpha} to distinfo.{i386,alpha}.    

Convert category emulators to new layout.  

Rename PLIST.* to pkg-plist.*.    

Use distinct md5 files for both alpha and i386. There are arch.   independent
packages that, despite the identical names, have   different contents.    

Update the checksum of 4 architecture independent rpms. The alpha   versions are
not the same as the i386 version, even though they   have the same name.    

Revert previous checksum change. The checksums were correct for   the i386. They
seem to be wrong for alpha. Whether that's caused   by a bad mirror or is caused
by a structural bogosity has to be   determined at this time.    

Fix checksums.  And no I don't care why they changed.    

Add missing ';;' in previous commit.    

Do not rely on the linux(8) shell script.  Instead, use an INSTALL   script so
that the behaviour of a package installation matches   that of a port
installation identically.    

RH6.1 has moved into old-releases on the master and most mirrors,   track this
while we wait for 6.3 or something less buggy than 6.2.