emulators/qemu-user-static: fix build on main

Call __sys___readlinkat() rather than the now removed __readlinkeat().
Neither are public interfaces, but __sys___readlinkat is somewhat more
so and is declared in libsys.h.

Reported by:	cperciva
MFH:		2025Q1
Sponsored by:	DARPA, AFRL

emulators/qemu-user-static: mark as PIE_UNSAFE (+)

Reported by:	bulk -t

Approved by:	portmgr (blanket)

Sponsored by:	Future Crew, LLC

emulators/qemu-user-static: unbreak with kern.elf64.allow_wx=0

$ qemu-aarch64-static /dev/null
qemu_mprotect__osdep: mprotect failed: Permission denied
mprotect of jit buffer: Permission denied

emulators/qemu*: Fix WWW

PR:		267686
Reported by:	grahamperrin

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

emulators/qemu-user-static: Update for 13.x stable

swapoff was MFC'd Dec 20th to stable/13, pull in changes to fix that.

Sponsored by:		Netflix

emulators/qemu-user-static: Fix build on recent FreeBSD

The swapoff(2) syscall recently changed from taking a single
argument to taking two (adding a field used for a "force" flag);
this broke qemu-user, since it translates system calls from
guest to host architecture.

Thanks to:	imp
With hat:	re@
Sponsored by:	https://www.patreon.com/cperciva

*/*: Remove redundant '-[0-9]*' from CONFLICTS_INSTALL

The conflict checks compare the patterns first against the package
names without version (as reported by "pkg query "%n"), then - if
there was no match - agsinst the full package names including the
version (as reported by "pkg query "%n-%v").

Approved by: portmgr (blanket)

emulators/qemu-user-static: Add CPE information

Approved by:	portmgr (blanket)

emulators/qemu-user-static: fix build on powerpc

/wrkdirs/usr/ports/emulators/qemu-user-static/work/qemu-bsd-user-6ffee39fe2e4/tcg/ppc/tcg-target.inc.c:1922:3:
error: "Unhandled abi"

emulators/qemu-user-static{,-devel}: fix build on recent FreeBSD

This updates both to 6ffee39fe2e4, which pulls in some patches to fix
the build after a recent commit to main that was MFC'd to stable/13.

While we're here, update qemu-user-static-devel to point to the current
upstream. qemu-user-static-devel will likely be updated in the near
future to point to imp's 6.0 rebase branch for Q/A.

MFH:	2021Q2

One more small cleanup, forgotten yesterday.
Reported by:	lwhsu

all: Remove all other $FreeBSD keywords.

Remove # $FreeBSD$ from Makefiles.

emulators/qemu-user-static: update to fix copy_file_range() bug

MFH:		2021Q1

emulators/qemu-user-static: update to f7fd10d7677c

This features a number of fixes; highlights:
- Handle aarch64 YIELD instructions
- Bump ARG_MAX to match the FreeBSD default on LP64 platforms
- Implement __specialfd(2) and copy_file_range(2)
- Style fixes
- Fix an issue with binary execution[0]
- Fix page fault handling for self-modifying binaries[1]
- Suppress noise from CIOGSESSION usage and restore CRIOGET handling
- Patch _umtx_op(2) through to the kernel where possible[2]

[0] Attempting to execute a binary by name was broken when there was an
unrelated entry by the same name in PWD.  The report below observed it in the
cluster while building games/dobutsu, which tried to execute `xz` in a directory

emulators/qemu-user-static: update to 39244526c0af

Highlights:
- Various ppc target fixes (courtesy of bdragon@)
- Fix for hw.ncpu on mips (courtesy of Dan Nelson)
- Switch to the new qemu-bsd-user/qemu-bsd-user upstream

emulators/qemu-user-static: fix the build after base r368005

r368005 removed CRIOGET, breaking the qemu-user-static build. We didn't
actually implement it anyways, so this update simply ripped it out rather
than trying to maintain it for old branches.

While here, bring qemu-user-static-devel up to parity with qemu-user-static.
We should be soon approaching the point where we can rebase the former
forward to a newer qemu.

Reported by:	gjb

emulators/qemu-user-static: update to 6f1319e1138c

Highlights:
- Fix stack allocation to behave more like FreeBSD really does[*].
- Raised the stack size on ARM, which should solve some limited cases of
  mysterious segfaults (e.g. lang/gcc9).
- Provide hw.ncpu and AT_NCPUS based on cpu affinity to more effectively
  limit cpu usage under qemu-user-static.

[*] We start out with a limited initial stack size, then login(1) raises
the stack size up to the maximum possible for the system (arch-based).
qemu-user-static will now calculate a maximum stack size based on the
host's configured rlimit and the qemu-bsd-user specified max for the arch
in question, then immediately raise the stack allocation size to the
maximum. This is especially important because we don't actually handle
stack growth.

post-patch is also dropped entirely, as these sed invocations have done
nothing since versions of qemu back in ~2007, AFAICT. CFLAGS/LDFLAGS get
sucked in during configure and qemu's built with -fno-strict-aliasing as
a default for even longer.

emulators/qemu-bsd-user: update to 4ee077c

Highlight:
- Properly fixed consistent segfaults at runtime on processors w/o AVX{,2}
  support (previously worked around).
- Fixed RISC-V threading support; we can now build up to gdb at the very
  least.
- AT_HWCAP is now populated, ARM reflects VFP support properly
- Fixed more regressions in signal handling
- Fixed freebsd11_kevent emulation (used by lang/go)
- Handful of fixes for warnings in the bsd-user build

emulators/qemu-user-static: update to d618de655

Primarily fixes qemu-user-static with the upstream switch to enabling
ARM_FEATURE_EL3 by default (I note that this actually eventually gets
reverted on its own just for CONFIG_USER in later revisions of qemu).

It also fixes some really fundamental breakage that was observed in, e.g.,
grep and most other applications. The official armv7 builder, beefy12, was
seeing an incredibly similar failure.

emulators/qemu-user-static: update to 269a4ac93

Fixes:
- Fixed recently broken execution of PIE binaries (not zero'ing .bss)[0]
- Fixed handling of signals during pselect(2)/ppoll(2)
- Fixed nanosleep(2) (was writing out time remaining only on success)
- Fixed swapcontext(2)/setcontext(2)
- Fixed a lot of ktimer handling issues
- Fixed direct exec of rtld

Improvements:
- Implemented clock_nanosleep(2)
- Implemented msgget(2) and, more generally, fixed SysV msg support

- Refactored ELF loading (much easier to read, less easy to break)

Investigated by:	Andrew Gierth <andrew tao11 riddles org uk> [0]

emulators/qemu-user-static: update to latest bsd-user-rebase-3.1

This fixes the recent ELF fix by properly initializing the extension to the
PT_LOAD segment rather than filling it with file garbage.

While here, disable capstone -- this part of the build is subject to
external pollution (= death), and we don't use it in qemu-user-static
anyways.

emulators/qemu-user-static: update to latest with more fixes

This fixes a little more fallout from the signal refactoring that wasn't
immediately obvious, and fixes a longstanding bug in ELF loading that
resulted in rtld segfaults.

emulator/qemu-user-static: fix major regression from signal refactor

Excellent diagnosis by Andrew Gierth revealed the exact nature of the
regression from previous signal handling fixes; gobject-introspection now
builds, and we should be able to once again build a pretty large chunk of
the ports tree.

The configure script patch has been incorporated into our tree, so the patch
may be removed.

As mentioned previously, qemu-user-static and qemu-user-static-devel will
not always be updated in lockstep; future changes will land to
qemu-user-static-devel first followed by qemu-user-static.

emulators/qemu-user-static: revive as a copy of qemu-user-static-devel

This is effectively the 3.1 update of qemu-user-static. The main feature of
the update to 3.1 is RISC-V support, contributed by Embecosm.

PR:		243906
Approved by:	koobs (mentor)

Remove the old emulators/qemu-user-static from the tree

This will be momentarily replaced by a repocopy of qemu-user-static-devel
back over to qemu-user-static. With the update of qemu-user-static to 3.1,
emulators/qemu-user-static will no longer be a slave port and
emulators/qemu-sbruno will be deprecated in a couple months.

Some history is being lost in this transition, but almost all of the
interesting parts of qemu-user-static were in the master port qemu-sbruno
anyways, which qemu-user-static-devel is repoderived from.

PR:		243906
Approved by:	koobs (mentor)

emulators/qemu-user-static: unbreak on powerpc64

Builds and works fine.

MFH:		2020Q1 (fix build blanket)

Let the masterport set the MAINTAINER line.

Submitted by:	kevans

Mark some ports failing on power64.  In cases where the error message
was a stub, provide a real one.

While here, pet portlint.

Approved by:	portmgr (tier-2 blanket)
Reported by:	swills

Add configure arg to fix build on 10.x

PR:	217411
Submitted by:	John Hein <z7dr6ut7gs@snkmail.com>

- Fix trailing whitespace in pkg-descrs, categories [a-f]*

Approved by:	portmgr blanket

Attempt to unbreak stage (pointed out by amdmi3/junovitch)
- Add ivshmem-client/server to the pkg-plist of qemu-sbruno.
- Forceably nuke ivshmem-client/server during the build of qemu-user-static.

Bump PORTREVISION.

Take these ports as they are based on my branches in github.

rip nox@

Reset maintainer

- Add rc.d script to emulators/qemu-user-static to (optinally) setup
  imgact_binmisc configs on systems where that exists.
- Bump PORTREVISION.

Submitted by:	linimon (with some changes by me)

This is a slave port of emulators/qemu-sbruno now. (not qemu-devel)

Confusion reported by:	linimon

- Update emulators/qemu-sbruno to latest github snapshot, fixing
  the bsd-user targets on 8 and 9.
- Switch emulators/qemu-user-static to be slave of emulators/qemu-sbruno.
- Update emulators/qemu-devel to latest upstream release 2.2.0, now
  w/o bsd-user patches and knob again.  (Or at least until the
  patches are merged upstream...) [1]
- Add appropriate CONFLICTS to emulators/qemu too and bump its
  PORTREVISION.

Suggested by:	andrew [1] (for the benefit of testing aarch64 guests)

Add MASTERDIR=   ${.CURDIR}/../qemu-sbruno as comment for now.

- Update to 2.0.2, announce message is here:

	http://thread.gmane.org/gmane.comp.emulators.qemu/291585

- Strip executables by default.
- Switch to USES=python:2,build.

Add new slave port emulators/qemu-user-static:

QEMU is a FAST! processor emulator using dynamic translation to achieve
good emulation speed.
QEMU has two operating modes:

    * Full system emulation. In this mode, QEMU emulates a full system
(for example a PC), including a processor and various peripherials.
It can be used to launch different Operating Systems without rebooting
the PC or to debug system code.
    * User mode emulation (Linux host only). In this mode, QEMU can launch
Linux processes compiled for one CPU on another CPU. It can be used to
launch the Wine Windows API emulator or to ease cross-compilation and
cross-debugging.