VisualBoyAdvance is an emulator for Nintendo's Gameboy Advance. It also
supports emulation of the Gameboy (classic), Gameboy Pocket, Gameboy Color
and Gameboy Advance SP.
Some of the main features are:
- option to use BIOS file
- zip/gzip file support
- graphic filters Normal, TV Mode, 2xSaI, Super 2xSaI and more
- interframe blending support
- built-in ARM/THUMB assembly debugger
- 10 save states accesible through keyboard
- automatic battery file load/save
- auto-fire support
- 16, 24 and 32 bit desktop support
- GDB remote debugging (see below for information)
- AGBPrint support for development
- RTC support
NOTICE: Thx go out to Wouter Groeneveld for helping me to test the port.
===> The following configuration options are available for vba-1.7.2_13:
DOCS=on: Build and/or install documentation
GTK2=off: GTK 2 GUI toolkit support
PROFILING=off: Enable profiling
===> Use 'make config' to modify these settings
*/*: Sunset 12.4-RELEASE/12-STABLE from ports tree
- Remove all references to defunct ARCH arm
- Remove all references to defunct ARCH sparc64
- Remove x11-drivers/xf86-video-sunffb which requires defunct sparc64
ARCH
- Remove sysutils/afbinit requires defunct sparc64 ARCH
- Remove all references to bktr driver
- Remove all references to defunct FreeBSD_12
- Remove all references to OSVERSION/OSREL corresponding to 12
- Remove conditionals in Mk/Uses/cabal.mk
- Remove sparc reference from Mk/Uses/qt-dist.mk
- Remove BROKEN_sparc64/NOT_FOR_ARCH=sparc64
- Remove BROKEN_FreeBSD_12* from:
- Remove OpenSSL patches from:
- Remove conditional flags for OSVERSION >= 1300000 to fixed flags.
Also move conditional flags for non sparc64/arm ARCH to fixed flags.
Reviewed by: brooks, jbeich, rene, salvadore
Differential Revision: https://reviews.freebsd.org/D42068
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner)
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
Mark BROKEN: fails to build
../Cheats.cpp:1347:5: error: non-constant-expression cannot be narrowed from
type 'unsigned int' to 'u8' (aka 'unsigned char') in initializer list
[-Wc++11-narrowing]
address & 255,
^~~~~~~~~~~~~
Reported by: pkg-fallout
Begin deorbit burn of ia64. We have not attempted to build packages for
it for many years.
While here, alphabetize ARCHs, pet portlint, and modernize usages.
Approved by: portmgr (tier-2 blanket)
emulators/vba: unbreak with libc++ 3.9
../GBA.cpp:1133:12: error: cannot initialize a variable of type 'char *' with an
rvalue of type 'const char *'
char * p = strrchr(file,'.');
^ ~~~~~~~~~~~~~~~~~
../GBA.cpp:1148:12: error: cannot initialize a variable of type 'char *' with an
rvalue of type 'const char *'
char * p = strrchr(file,'.');
^ ~~~~~~~~~~~~~~~~~
../GBA.cpp:1172:12: error: cannot initialize a variable of type 'char *' with an
rvalue of type 'const char *'
char * p = strrchr(file,'.');
^ ~~~~~~~~~~~~~~~~~
../GBA.cpp:1192:12: error: cannot initialize a variable of type 'char *' with an
rvalue of type 'const char *'
char * p = strrchr(file,'.');
^ ~~~~~~~~~~~~~~~~~
../Util.cpp:481:12: error: cannot initialize a variable of type 'char *' with an
rvalue of type
(Only the first 15 lines of the commit message are shown above )
Replace USES=libtool:oldver with USES=libtool or USES=libtool:keepla in
the 32 ports that still use it. Bump PORTREVISION on their dependent
ports except the ones that depend on these:
audio/libogg
audio/libvorbis
devel/pcre
ftp/curl
graphics/jpeg
graphics/libart_lgpl
graphics/tiff
textproc/expat2
textproc/libxslt
In these cases the same trick as in the recent gettext update is used.
(Only the first 15 lines of the commit message are shown above )
Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.
Part II, Bump PORTREVISIONs.
PR: 192025
Tested by: antoine (-exp runs)
Approved by: portmgr (implicit)
- Support staging.
- Sort OPTIONS_DEFINE.
- Stop including bsd.port.{pre,post}.mk:
o Replace the ${ARCH} check with BROKEN_<arch>=...
o Include bsd.port.options.mk for checking the GTK2 option.
Support LIBS like LDFLAGS.
- Add LIBS="${LIBS}" to MAKE_ENV and CONFIGURE_ENV.
- Add an option helper for LIBS.
- Adjust all ports that already use LIBS. Also remove references to
PTHREAD_CFLAGS and PTHREAD_LIBS while here.
- Some ports did not support having a LIBS environment variable and
required additional patches.
Somewhat simplified a linker command line looks like:
${CC} ${src_LDFLAGS} ${LDFLAGS} ${src_LIBS} ${LIBS}
where src_LDFLAGS and src_LIBS are controlled by upstream and LDFLAGS and
LIBS can be controlled by us. If possible -L and -l flags need to be
(Only the first 15 lines of the commit message are shown above )
- Add PROFILING_DESC (should be part of r323888)
- Unbreak the build on amd64 (and make it generally type safe)
- Remove gtkmm-2.4 from LIB_DEPENDS, glademm-2.4 implies it
- Expand creator's name in the Makefile header
- Fix the build on recent versions of FreeBSD (against Clang)
- Add a patch from Gentoo to unbreak GTK+ program build
- Fix potential buffer overflow (also obtained from Gentoo)
- Convert to OptionsNG, utilize new option helpers
- Drop WANT_GNOME and USE_GNOME, they are useless
- Define LICENSE (GPLv2), remove COPYING from the docs
- Make pkg-message word substitution actually work
- Generally sanitize and cleanup the Makefile
Reported by: pointyhat-west
- Update devel/sdl12 to 1.2.15
- Update audio/sdl_mixer to 1.2.15
- Update graphics/sdl_image to 1.2.12
- Update graphics/sdl_ttf to 2.0.11
- Update graphics/sdl_gfx to 2.0.23
- Update net/sdl_net to 1.2.8
- Bump PORTREVISIONs on ports that depend on one or more packages due to
ABI and shared library version changes
- Update Mk/bsd.sdl.mk accordingly for the new shared library versions
Tested by: exp-run by pav
Remove more tags from pkg-descr files fo the form:
- Name
em@i.l
or variations thereof. While I'm here also fix some whitespace and other
formatting errors, including moving WWW: to the last line in the file.
- Update devel/sdl12 to version 1.2.11. Now we employ stock SDL directory
structure (i.e. include/SDL for includes and sdl-config for configuration
binary)
- Update graphics/sdl_ttf to version 2.0.8
- Update graphics/sdl_image to version 1.2.5
- Update audio/sdl_mixer to version 1.2.7
- Update net/sdl_net to version 1.2.6
- Update Mk/bsd.sdl.mk accordingly
- Fix dependent ports to fit the new directory structure and avoid several
API breakages
- Bump up portrevisions for all dependent ports to allow them to be upgraded
by portupgrade/portmaster etc tools
Approved by: kris (portmgr), sem (mentor)
maintainer update of emulators/vba
Update of emulators/vba to 1.7.1_2
Also added a pkg-message to explain about the configuration file,
and made sure that the default configuration file didn't get left
behind when make deinstall is done.
PR: ports/64612
Submitted by: No Name <arundel@gmx.net>
Update to version 1.7.1: update battery file more often; many bugfixes.
See ChangeLog for complete details.
PR: ports/62645
Submitted by: arundel@gmx.net (maintainer)
New port: VisualBoyAdvance
VisualBoyAdvance is currently one of the best Gameboy Advance
emulators out there.
PR: ports/56376
Submitted by: No Name <arundel@gmx.net>
