ftp/pure-ftpd: Update to 1.0.52

Changes:	https://github.com/jedisct1/pure-ftpd/releases
		https://github.com/jedisct1/pure-ftpd/blob/master/ChangeLog

security/libsodium: update to 1.0.19, bump dependent ports

PR:	278259
Reported by:	Andrey Korobkov <alster-vinterdalen.se>

*/*: Remove GNU_CONFIGURE_MANPREFIX=${PREFIX}/share after
9fd7ee1cdf6cbd5528159b58a966e1a40e2909a9

ftp/pure-ftpd: Update manpage location
(003a571d1d6585196545295efc181514f171c4c4, r523104)

ftp/pure-ftpd: Update WWW and clean up pkg-descr

Mk/**ldap.mk: Convert USE_LDAP to USES=ldap

Convert the USE_LDAP=yes to USES=ldap and adds the following features:

- Adds the argument USES=ldap:server to add openldap2{4|5|6}-server as
  RUN_DEPENDS
- Adds the argument USES=ldap<version> and replaces WANT_OPENLDAP_VER
- Adds OPENLDAP versions in bsd.default-versions.mk
- Adds USE_OPENLDAP/WANT_OPENLDAP_VER in Mk/bsd.sanity.mk
- Changes consumers to use the features

Reviewed by:	delphij
Approved by:	portmgr
Differential Revision: https://reviews.freebsd.org/D38233

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

ftp: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  Aaron Dalton <aaron@FreeBSD.org>
  *  Alexander Kriventsov
  *  Anders Nordby <anders@fix.no>
  *  Andreas Fehlner <fehlner@gmx.de>
  *  Andrew Pantyukhin <infofarmer@FreeBSD.org>
  *  Andrey Zakhvatov
  *  Antonio Carlos Venancio Junior (<antonio@inf.ufsc.br>)
  *  Chris Piazza <cpiazza@FreeBSD.org>
  *  Damjan Marion <dmarion@open.hr>
  *  Emanuel Haupt <ehaupt@critical.ch>
  *  Eric Freeman <freebsdports@chillibear.com>

ftp/pure-ftpd: Update to 1.0.51

Changes:	https://github.com/jedisct1/pure-ftpd/releases
		https://github.com/jedisct1/pure-ftpd/blob/master/ChangeLog

ftp/pure-ftpd: Enable more options by default

- Sort OPTIONS_DEFAULT
- Bump PORTREVISION for package change

ftp/pure-ftpd: Fix SIGSEGV with PostgeSQL backend

- Bump PORTREVISION for package change

PR:		261358
Reported by:	Artyom Davidov <ard_1@mail.ru>
Obtained
from:	https://github.com/jedisct1/pure-ftpd/commit/c3f0f3c91d86939e6fabf5f65c6c6fc964e6032e

ftp/pure-ftpd: Update to 1.0.50

- Update MASTER_SITES: remove ftp://

Changes:	https://github.com/jedisct1/pure-ftpd/releases
		https://www.pureftpd.org/project/pure-ftpd/news/

all: Remove all other $FreeBSD keywords.

Remove # $FreeBSD$ from Makefiles.

Drop the ipv6 virtual category for f* category as it is not relevant anymore

Remove UTF-8 option and iconv stuff

- Bump PORTREVISION for package change

RFC 2640 support has been removed from free version since 1.0.48.

PR:		240264
Reported by:	Linus Sundqvist <linus.sundqvist@loopia.se>

Convert to UCL & cleanup pkg-message (categories e-g)

Update to 1.0.49

Changes:	https://github.com/jedisct1/pure-ftpd/releases

Fix TLS 1.3 compatibility

- Bump PORTREVISION for package change

Obtained
from:	https://github.com/jedisct1/pure-ftpd/commit/4a495c61ce22c893aed5ee57f6ce0b43c3be59ad
PR:		235354
Reported by:	Matt Churchyard <churchers@gmail.com>

Update to 1.0.47

Changes:	https://github.com/jedisct1/pure-ftpd/releases

- Update libsodium to 1.0.15 [1]
- Bump revisions for all dependent ports

PR:		223147 [1]
Submitted by:	Greg V [1]

Use USES=mysql

Update to 1.0.46

- Reformat PKGMESSAGE

Changes:	https://github.com/jedisct1/pure-ftpd/releases

Update to 1.0.45

Changes:	https://github.com/jedisct1/pure-ftpd/releases
		https://github.com/jedisct1/pure-ftpd/blob/master/ChangeLog

The output of tools like awk, date, sort, tr,... depends on the current
locale set by the user.  Add LANG=C and LC_ALL=C at the beginning of
bsd.port.mk and export them so all commands are executed with the C locale.
LC_ALL=C overrides all other LC_* variables.  LANG is used by setlocale(3)
as default value for LC_* variables, so normally it isn't used when LC_ALL
is set, but there's code out there that looks at LANG directly so it's safer
to set it as well.  The only commands not captured by this are !=
assignments before any inclusion of bsd.port.*mk.

Introduce USE_LOCALE=<locale> that adds LANG=<locale> and LC_ALL=<locale> to
CONFIGURE_ENV and MAKE_ENV so upstream build systems can be executed with a
different locale (e.g. USE_LOCALE=en_US.UTF-8).

PR:		215882
Exp-run by:	antoine
Approved by:	portmgr (antoine)

Fix TLSCipherSuite parsing

- Bump PORTREVISION for package change

Note: author pointed out that users will get a more secure cipher suite by not
setting TLSCipherSuite to HIGH and just use the default.

PR:		215906
Reported by:	<yani@pi-greece.eu>
Obtained
from:	https://github.com/jedisct1/pure-ftpd/commit/3823d00dee089b998d1f40943e9aa3f619c238b2

Update to 1.0.44

- Clean up MASTER_SITES
- Convert to options target helper
- Update WWW

Changes:	https://github.com/jedisct1/pure-ftpd/releases

- Update to 1.0.43
- Use USES=ssl

Changes:	https://github.com/jedisct1/pure-ftpd/releases

Make pure-ftpd flags configurable in /etc/rc.conf

Recognize a "pureftpd_flags" variable in pure-ftpd's rc script. Pretty much
anything that can be placed in /usr/local/etc/pure-ftpd.conf can be placed
in this variable instead.

ftp/pure-ftpd/Makefile
	Bump PORTREVISION

ftp/pure-ftpd/files/pure-ftpd.in
	Handle pureftpd_flags. It needs special handling because, unlike
	most daemons, pure-config.pl takes its mandatory argument first and
	its optional flags last.

PR:		210311
Approved by:	maintainer-timeout
Approved by:	brd (ports)
Sponsored by:	Spectra Logic Corp
Differential Revision:	https://reviews.freebsd.org/D6676

security/libsodium: Upgrade version 1.0.8 => 1.0.10

Also bump all ports that depend on libsodium.

PR:		210999
Submitted by:	manu
Approved by:	vsevolod (maintainer)

- Add LICENSE_FILE

Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.

With hat:	portmgr
Sponsored by:	Absolight

- Update libsodium to 1.0.8
- Bump revisions of all dependant ports

PR:		206482
Submitted by:	lev, w.schwarzenfeld@aon.at

- Update to 1.0.42

Changes:	https://github.com/jedisct1/pure-ftpd/blob/master/ChangeLog

- Update to 1.0.41
- Remove TLS_CERTFILE: it is added to pure-ftpd.conf and configurable at runtime

Changes:	https://github.com/jedisct1/pure-ftpd/blob/master/ChangeLog

- Update to 1.0.40

Changes:	https://github.com/jedisct1/pure-ftpd/blob/master/ChangeLog

- Updated libsodium to 1.0.3 [1]
- Bump revision for dependent ports

PR:		200548 [1]
Submitted by:	rsimmons0 at gmail.com [1]

- Update to 1.0.39

Changes:	https://github.com/jedisct1/pure-ftpd/blob/master/ChangeLog

- Update to 1.0.38

Changes:	https://github.com/jedisct1/pure-ftpd/blob/master/ChangeLog

- Make USE_OPENSSL conditional

Submitted by:	koobs

- Cleanup CONFIGURE_ARGS: --localstatedir=/var was added by bsd.port.mk since
r384380

- Use USE_OPENSSL

PR:		199732
Submitted by:	Philip Jocks <freebsdbugs@filis.org>

- Use CPPFLAGS instead of CFLAGS

converters/libiconv:
- Remove const qualifier from iconv(3) to match POSIX:
  http://pubs.opengroup.org/onlinepubs/9699919799/functions/iconv.html
- Patch iconv.h to expose more GNU extensions when LIBICONV_PLUG is
  defined because the base system iconv supports these extensions too.

Add/remove patches to/from ports to call iconv with non-const arguments.

This breaks some ports on FreeBSD 10 because base system iconv.h still has
the const qualifier.  Fix this by letting USES=iconv add a build dependency
on converters/libiconv so ports can use its iconv.h (with LIBICONV_PLUG
defined) instead of the base system iconv.h.

This exposed some ports that link with libiconv when it is available instead
of using libc iconv.  In these cases one of the following changes has been

- Add CPE info

Approved by:	portmgr blanket

- Update to 1.0.37
- Add SCRYPT option (on by default)
- Complete CONFIGURE_ARGS
- Add git repository to WWW

Note that this version includes several security changes:
- SSLv2 and SSLv3 are refused by default
- DES-hashed passwords are not supported
- RC4 was killed

Changes:	https://github.com/jedisct1/pure-ftpd/blob/master/ChangeLog

- Enable TLS option by default
- Allow to change location of pid files
- Bump PORTREVISION for package change

Switch to USES=pgsql

net/openldap24-*:
- Convert to USES=libtool and bump dependent ports
- Avoid USE_AUTOTOOLS
- Don't use PTHREAD_LIBS
- Use MAKE_CMD

databases/glom:
- Drop :keepla
- Add INSTALL_TARGET=install-strip

databases/libgda4* databases/libgda5*:
- Convert to USES=libtool and bump dependent ports
- USES=tar:xz
- Use INSTALL_TARGET=install-strip
- Use @sample

- Fix rc script:
  - Reorder variables
  - Assign default value for
    - pureftpd_authd_enable
    - pureftpd_authsocket: remove detection via pure-config.pl
    - pureftpd_upload_enable
  - Remove duplicate pidfile_authd
  - Simplify script
- Bump PORTREVISION for package change

MFH:		2014Q2

- Use USES=tar:bzip2

- Add pure-authd support in rc script [1][2]
- Indent rc script
- Cosmetic change
- Bump PORTREVISION for package change

PR:		ports/163339 [1], ports/180992 [2] (based on)
Submitted by:	Gabor HALASZ <halasz.g@freemail.hu> [1]
		Ari Maniatis <ari@ish.com.au> [2]

- Add LICENSE
- Sort OPTIONS
- Convert to new options helper
- Fix shebang
- Reword pre-fetch: message and change variables:
  - Change CERTFILE to TLS_CERTFILE
  - Change WITH_LANG to LANG
- Support STAGEDIR
- Simplify Makefile
- Cosmetic change
- Reformat pkg-descr

- Reword COMMENT: remove "very"

Suggested by:	eadler

Add NO_STAGE all over the place in preparation for the staging support (cat:
ftp)

- Remove leading indefinite article from COMMENT

- Convert to new perl framework

- Remove MAKE_JOBS_SAFE variable

Approved by:	portmgr (bdrewery)

- Use CERTFILE for custom certificate location

PR:		ports/176614
Requested by:	Ilya Pizik <ilya.pizik@gmail.com>

- Fix shebang line for users without USE_PERL=yes

PR:		ports/177481
Submitted by:	Lukasz Wasikowski <lukasz@wasikowski.net>

- Convert USE_ICONV=yes to USES=iconv
- Change USE_GNOME=pkgconfig|gnomehack to USES=pathfix|pkgconfig while here

Reviewed by:	bapt, kwm

- Convert to new options framework
- Trim headers

PR:		ports/168922
Submitted by:	Po-Chien Lin <linpc@cs.nctu.edu.tw>
Approved by:	maintainer timeout (6 month)

Move the rc.d scripts of the form *.sh.in to *.in

Where necessary add $FreeBSD$ to the file

No PORTREVISION bump necessary because this is a no-op

Fix typos in COMMENT

- Use bsd.port.options.mk for option handling
- Take maintainership

- update to 1.0.36

Drop maintainership

Feature safe:   yes

In the rc.d scripts, change assignments to rcvar to use the
literal name_enable wherever possible, and ${name}_enable
when it's not, to prepare for the demise of set_rcvar().

In cases where I had to hand-edit unusual instances also
modify formatting slightly to be more uniform (and in
some cases, correct). This includes adding some $FreeBSD$
tags, and most importantly moving rcvar= to right after
name= so it's clear that one is derived from the other.

Update to 1.0.35

Update to 1.0.34

- Update to 1.0.32

PR:             ports/155386
Submitted by:   Zhihao Yuan <lichray@gmail.com>
Security:       CVE-2011-1575

Cleanup MASTER_SITES and since i'm here, remove MD5

- Remove BANNER option since it's gone
- Add 3 new OPTIONS, ANUNRENAME, ANUNRESUME and ANONDELETE to give more
  privileges to anonymous users
- Cump PORTREVISION since BANNER option was on by default

Submitted by:   Edho P Arief <edhoprima@gmail.com>

Begin the process of deprecating sysutils/rc_subr by
s#. %%RC_SUBR%%#. /etc/rc.subr#

Update to 1.0.29

Update to 1.0.28

PR:             ports/144095
Submitted by:   Denny Lin <dennylin93 at cnmc32.hs.ntnu.edu.tw>
Feature safe:   yes

Update to 1.0.27

Convert --with-virtualchroot to an OPTION, on by default

Sugested by:    Jozsef Kovacs <jozsef.kovacs@datira.com>

Update to 1.0.26

- Add --localstate=/var to make pure-ftpwho work again
- Bump PORTREVISION

Reported by:    Jordi Espasa Clofent <jespasac@minibofh.org>
Obtained from:  pure-ftpd maillist

Force default PID file and fix startup script

Reported by:    Jordi Espasa Clofent <jespasac@minibofh.org>

Update to 1.0.24

PR:             ports/139931
Submitted by:   Sunpoet Po-Chuan Hsieh <sunpoet@sunpoet.net>

- Fix broken makefiles introduced with translation to new SF File Release System

Reported by:    dan
Pointyhat to:   myself

- Switch SourceForge ports to the new File Release System: categories starting
with E,F

- Fix working with LDAP

Notified by:    Krzysztof Stryjek <wtp@bsdserwis.com>
Obtained from:  pure-ftpd maillist

- Tarball was rerolled, chages were:
  o Fix typo
  o Fix compilation with gcc 2.x

- Update to 1.0.22
- Convert TLS to an option, off by default since this is considered
  experimental
- Change PRIVSEP option on by default to reflect default configure

Mark all my ports as MAKE_JOBS_SAFE and MAKE_JOBS_UNSAFE

--with-largefile is not recommended to be default, so, convert it to OPTION and
set it off by default, since this changes the default options, bump PORTREVISION

Pointed by:     Yar Odin <yarodin@gmail.com>

Fix following problem:

Pure-ftpd supports the "SITE UTIME" command, which allows the client to set the
modification time of a file to a particular timestamp, expressed in UTC.

However, pure-ftpd passes the UTC timestamp directly to the operating system's
utime() function, which is a bug, because utime() requires that the timestamp be
in local time instead of UTC.

For example for server with MSK localtime:
> ---> MDTM cuba2008_1.mpeg.stat
> <--- 213 20090106074437

> ---> SITE UTIME cuba2008_1.mpeg.stat 20090106104437 20090106104437
20090106104437 UTC
> <--- 250 UTIME OK

PR:             ports/131645
Submitted by:   Yar Odin <yarodin@gmai.com>

- Fix a problem with AUTH TLS [1]
- Bump PORTREVISION
- Some cosmetic changes (e.g. indentation)
- Move pkg-message to files/pkg-message.in
- Respect NOPORTEXAMPLES
- Use INSTALL_SCRIPT to install ${PREFIX}/sbin/pure-ftpd.pl

PR:             ports/120187 [1]
Submitted by:   Filip Palian <filip.palian@expro.pl> [1]

- Remove 4.x support
- Use PORTDOCS

Back out my last commit because new patch doesn't work

Fix the log_mysql_p.h patch to a better way

Fix build with mysql-5.0.24a

Reported by:    s.klaasen@hccnet.nl, Chris Riley <criley@risanet.com>
Patch by:       mnag

Reassign from inactive maintainer to new volunteer.

Hat:            portmgr

Add an new option to provide a mechanism for users to disable kqueue
support if necessary.

Submitted by:   Kirk Strauser <kirk daycos com>
Approved by:    maintainer

Fix a typo in pureftpd.schema

PR:             ports/97387
Submitted by:   Malte von dem Hagen <bsd at mnetworking.de>
Approved by:    maintainer

- Update to 1.0.21
- Add an option for charset conversion
- Add HTTP master site

PR:             ports/93646
Submitted by:   Jui-Nan Lin <jnlin@csie.nctu.edu.tw>
Approved by:    maintainer