ftp/py-pycurl: Update to 7.45.4

Changes:	https://github.com/pycurl/pycurl/blob/master/ChangeLog
		http://pycurl.io/docs/latest/release-notes.html

ftp/py-pycurl: Convert to USE_PYTHON=pep517

- Bump PORTREVISION for package change

ftp/py-pycurl: Update to 7.45.2

Changes:	https://github.com/pycurl/pycurl/blob/master/ChangeLog
		http://pycurl.io/docs/latest/release-notes.html

all: remove explicit versions in USES=python for "3.x+"

The logic in USES=python will automatically convert this to 3.8+ by
itself.

Adjust two ports that only had Python 3.7 mentioned but build fine
on Python 3.8 too.

finance/quickfix: mark BROKEN with PYTHON

libtool: compile:  c++ -DHAVE_CONFIG_H -I. -I../.. -I -I. -I.. -I../.. -I../C++
-DLIBICONV_PLUG -DPYTHON_MAJOR_VERSION=3 -Wno-unused-variable
-Wno-maybe-uninitialized -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong
-fno-strict-aliasing -DLIBICONV_PLUG -Wall -ansi
-Wno-unused-command-line-argument -Wpointer-arith -Wwrite-strings
-Wno-overloaded-virtual -Wno-deprecated-declarations -Wno-deprecated -std=c++0x
-MT _quickfix_la-QuickfixPython.lo -MD -MP -MF
.deps/_quickfix_la-QuickfixPython.Tpo -c QuickfixPython.cpp  -fPIC -DPIC -o
.libs/_quickfix_la-QuickfixPython.o
warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean
'-Wno-uninitialized'? [-Wunknown-warning-option]
QuickfixPython.cpp:175:11: fatal error: 'Python.h' file not found
          ^~~~~~~~~~
1 warning and 1 error generated.

Reviewed by:	portmgr, vishwin, yuri
Differential Revision:	<https://reviews.freebsd.org/D40568>

ftp/py-pycurl: Update WWW and clean up pkg-descr

ftp/py-pycurl: Update to 7.45.2

Changes:	https://github.com/pycurl/pycurl/blob/master/ChangeLog
		http://pycurl.io/docs/latest/release-notes.html

*/*: rename CHEESESHOP to PYPI in MASTER_SITES

PR:			267994
Differential revision:	D37518
Approved by:		bapt

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

ftp: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  Aaron Dalton <aaron@FreeBSD.org>
  *  Alexander Kriventsov
  *  Anders Nordby <anders@fix.no>
  *  Andreas Fehlner <fehlner@gmx.de>
  *  Andrew Pantyukhin <infofarmer@FreeBSD.org>
  *  Andrey Zakhvatov
  *  Antonio Carlos Venancio Junior (<antonio@inf.ufsc.br>)
  *  Chris Piazza <cpiazza@FreeBSD.org>
  *  Damjan Marion <dmarion@open.hr>
  *  Emanuel Haupt <ehaupt@critical.ch>
  *  Eric Freeman <freebsdports@chillibear.com>

ftp/py-pycurl: Update to 7.45.1

Changes:	https://github.com/pycurl/pycurl/blob/master/ChangeLog
		http://pycurl.io/docs/latest/release-notes.html

ftp/py-pycurl: Update to 7.44.1

Changes:	https://github.com/pycurl/pycurl/blob/master/ChangeLog
		http://pycurl.io/docs/latest/release-notes.html

Remove # $FreeBSD$ from Makefiles.

Drop python 2.7 support from a few ports

With hat:	portmgr

Relax hardcoded paths to fix build with Python 3.8.7

Since r558913 Python 3.8 incorporates BPO-42604 [1] which changed the
shared libs naming scheme.  This means "EXT_SUFFIX" is now derived from
SOABI and yields with Python 3.8 to ".cpython-38.so" instead of ".so".

The affected ports strip the libaries in the "post-install" target via
hardcoded path(s) and the build fails at the end because the new extension
is not expected at this place.

Remedy the issue by adding wildcards to these paths.  This should also
prepare the ports for future Python releases, which will use the new shared
libs naming scheme.

[1] https://bugs.python.org/issue42604

PR:		252057
Reported by:	John Kennedy
Reviewed by:	fluffy, koobs
Approved by:	koobs (python)

Update to 7.43.0.6

Changes:	https://github.com/pycurl/pycurl/blob/master/ChangeLog
		http://pycurl.io/docs/latest/release-notes.html

Update to 7.43.0.5

Changes:	http://pycurl.io/docs/latest/release-notes.html

Update to 7.43.0.4

Changes:	http://pycurl.io/docs/latest/release-notes.html

Update to 7.43.0.3

Changes:	http://pycurl.io/docs/latest/release-notes.html

ftp/py-pycurl: Fix license framework usage

Update to 7.43.0.2

Changes:	http://pycurl.io/docs/latest/release-notes.html

Switch all pypi.python.org WWWs to a new PyPi home pypi.org where
they now redirect to anyway. All new urls checked to return 200,
I've fixed a couple of them in the process.

Approved by:	portmgr blanket, mat

Update pkg-descr

- Add PyPI as primary WWW

Update to 7.43.0.1

Changes:	http://pycurl.io/docs/latest/release-notes.html

Add DOCS option

- Fix documentation installation:
  - Avoid conflicts between FLAVORS
  - Do not install license files
- Bump PORTREVISION for package change

PR:		224108
Reported by:	Ting-Wei Lan <lantw44@gmail.com>

- Update to 7.43.0
- Cleanup MASTER_SITES
- Add LICENSE_FILE
- Add missing USES=ssl
- Update WWW

Changes:	http://pycurl.io/docs/latest/release-notes.html

Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.

With hat:	portmgr
Sponsored by:	Absolight

- Update to 7.21.5

Changes:	http://pycurl.sourceforge.net/doc/release-notes.html

- Move ftp/py-curl to ftp/py-pycurl
- Bump PORTREVISION for dependent ports