ftp/rubygem-curb: Update to 1.0.9

Changes:	https://github.com/taf2/curb/blob/master/ChangeLog.md

ftp/rubygem-curb: Update to 1.0.7

Changes:	https://github.com/taf2/curb/blob/master/ChangeLog.md

ftp/rubygem-curb: Update to 1.0.6

Changes:	https://github.com/taf2/curb/blob/master/ChangeLog.md

ftp/rubygem-curb: Update to 1.0.5

Changes:	https://github.com/taf2/curb/blob/master/ChangeLog.md

Mk/**ruby.mk: Switch from USE_RUBY=yes to USES=ruby

Switch from Mk/bsd.ruby.mk to Mk/Uses/ruby.mk

Notable changes are.

- Mk/bsd.ruby.mk is moved to Mk/Uses/ruby.mk.
- USE_RUBY=yes is replaced with USES=ruby.
- USE_RUBY_EXTCONF is replaced with USES=ruby:extconf.
- USE_RUBY_RDOC is replaced with USES=ruby:rdoc.
- USE_RUBY_SETUP is replaces with USES=ruby:setup.
- RUBY_NO_BUILD_DEPENDS and RUBY_NO_RUN_DEPENDS are replaced with
  USES=ruby:{build,none,run}.
- RUBY_REQUIRE isn't used anywhere, so removed.
- USES=gem now implies USES=ruby.

This is mainly the work of yasu@ at https://reviews.freebsd.org/D27863

I have just made some cosmetic changes and ran exp-run to test that the
tree is not in a BROKEN state.

Approved by:	portmgr
Differential Revision:	https://reviews.freebsd.org/D37925

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

ftp: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  Aaron Dalton <aaron@FreeBSD.org>
  *  Alexander Kriventsov
  *  Anders Nordby <anders@fix.no>
  *  Andreas Fehlner <fehlner@gmx.de>
  *  Andrew Pantyukhin <infofarmer@FreeBSD.org>
  *  Andrey Zakhvatov
  *  Antonio Carlos Venancio Junior (<antonio@inf.ufsc.br>)
  *  Chris Piazza <cpiazza@FreeBSD.org>
  *  Damjan Marion <dmarion@open.hr>
  *  Emanuel Haupt <ehaupt@critical.ch>
  *  Eric Freeman <freebsdports@chillibear.com>

ftp/rubygem-curb: Update to 0.9.11

Changes:	https://github.com/taf2/curb/blob/master/ChangeLog.md

Remove # $FreeBSD$ from Makefiles.

Update to 0.9.7

Changes:	https://github.com/taf2/curb/commits/master

Fix build with curl 7.62.0

Update to 0.9.6

Changes:	https://github.com/taf2/curb/commits/master

Update to 0.9.5

Changes:	https://github.com/taf2/curb/commits/master

Update to 0.9.4

Changes:	https://github.com/taf2/curb/commits/master

Convert USES=gem:autoplist to USES=gem since autoplist is default

create USES=gem and update rubygem- ports to use it

Note that for now ports still have to have USE_RUBY=yes to use USES=gem

PR:		209041
Differential Revision:	https://reviews.freebsd.org/D6070

- Update to 0.9.3

Changes:	https://github.com/taf2/curb/commits/master

- Update to 0.9.2

Changes:	https://github.com/taf2/curb/commits/master

Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.

With hat:	portmgr
Sponsored by:	Absolight

- Update to 0.9.1
- Add LICENSE_FILE

Changes:	https://github.com/taf2/curb/commits/master
Sponsored by:	PortsCamp Taiwan

- Update to 0.8.8

Changes:	https://github.com/taf2/curb/commits/master

- Update to 0.8.7
- Add LICENSE
- Update WWW

Changes:	https://github.com/taf2/curb/commits/master

ftp/rubygem-curb: update to 0.8.6

many ruby/rubygem ports: death of rubyforge.org

rubyforge.org shutdown on May 15, 2014. This commit accounts for that by doing
several things:

- Deprecate ruby that had only rubyforge.org as MASTER_SITES (and so are now
  only fetchable via our cache)
- Deprecate ports that depend on those
- Update the WWW pkg-descr line that points to rubyforge.org for rubygem ports
  (which are still fetchable from rubygems.org)

The next step will be to remove rubyforge.org from bsd.sites.mk, after these
deprecated ports are deleted.

Phabric:	D591
With hat:	ruby
Approved by:	portmgr (because of committing to unstaged graphics/mingplot port)

- Update to 0.8.5
- Use LIB_DEPENDS

Changes:	https://github.com/taf2/curb/commits/master

- Add stage support

Add NO_STAGE all over the place in preparation for the staging support (cat:
ftp)

- Reset maintainer after no response to mail since Jan 2013
- Clean up headers and comments while here

Reviewed by:	danfe

- Update to 0.8.4

PR:		ports/179866
Approved by:	maintainer timeout (freebsdports@chillibear.com, >2 weeks)

- Update to 0.8.1

PR:		ports/170618
Approved by:	maintainer timeout (freebsdports@chillibear.com, >2 weeks)

- Update to 0.7.17

PR:             ports/164882
Submitted by:   myself (pgollucci)
Approved by:    maintainer timeout (freebsdports@chillibear.com ; 14 days)
Sponsored by:   RideCharge Inc. / TaxiMagic

- Update to 0.7.16

PR:             ports/163384
Submitted by:   myself (pgollucci)
Approved by:    freebsdports@chillibear.com (maintainer)
Sponsored by:   RideCharge Inc. / TaxiMagic

- One WWW line in pkg-descr will do just fine

- Update to 0.7.15

PR:             ports/158298
Submitted by:   Eric Freeman <freebsdports@chillibear.com> (maintainer)

- Update to 0.7.12

PR:             ports/155096
Submitted by:   Eric Freeman <freebsdports@chillibear.com> (maintainer)

- Update to 0.7.9

PR:             153591
Submitted by:   Eric Freeman <freebsdports@chillibear.com> (maintainer)
Feature safe:   yes

- Mass fixup of WWW: lines pkg-descr based on rubygems.org Homepage meta info

Prompted by:    distilator
With Hat:       ruby@
Sponsored by:   RideCharge Inc. / TaxiMagic

- Update to 0.7.8

PR:             ports/150009
Submitted by:   myself (pgollucci)
Approved by:    freebsdports@chillibear.com (maintainer)
Sponsored by:   RideCharge Inc. / TaxiMagic

- Update to 0.7.7

PR:             ports/148119
Submitted by:   Eric Freeman <freebsdports@chillibear.com> (maintainer)

- Update to 0.8.5

PR:             ports/147697
Submitted by:   Eric Freeman <freebsdports@chillibear.com> (maintainer)

- Update to 0.7.4

PR:             ports/147533
Approved by:    freebsdports@chillibear.com (maintainer)
Submitted by:   myself (pgollucci@)

Curb (probably CUrl-RuBy or something) provides Ruby-language
bindings for libcurl, a fully-featured client-side URL
transfer library.

WWW: http://taf2.github.com/curb/
WWW: http://curb.rubyforge.org/

PR:             ports/147182
Submitted by:   Eric Freeman <freebsdports at chillibear.com>