Exult is an open source engine for playing Ultima VII on a variety of
modern operating systems and environments. The Black Gate (including
Forge of Virtue) and Serpent Isle (plus Silver Seed) are both playable
to the end. Some differences to the original games exist; see sections
5. of the FAQ.
While it is possible to use the engine for other games, no such game has
been written yet. Therefore, Exult is useless unless you own a copy of one
of the Ultima VIIs.
===> The following configuration options are available for exult-1.12.1,1:
ALSA=off: ALSA audio architecture support
DEBUG=off: Build with debugging support
DOCS=on: Build and/or install documentation
FLUIDSYNTH=off: MIDI playback support via FluidSynth
GIMP=off: GIMP plugin support
STUDIO=on: Install Exult Studio
===> Use 'make config' to modify these settings
gnome.mk: rename gdkpixbuf2 to gdkpixbuf to prepare for port move
The GTK 1-based gdk-pixbuf has not existed for some time.
No functional or package changes.
games/exult{,-devel}: Silence cast warnings on clang >=16
Apply upstream recommendation to silence cast warnings observed on clang
16 and 17 until a fix is provided.
(impact: testport log size from ~70MB to ~700KB)
accessibility/at-spi2-core: update to 2.46.0
What's new in at-spi2-core 2.46.0:
* Fix GetInterfaces documentation on org.a11y.atspi.Accessible
interface.
What's new in at-spi2-core 2.45.91:
* Send device event controller events using the same signature as other
events.
* Document the Accessible, Action, and Cache dbus interfaces.
* Fix license of atspi-gmain.c (#87).
What's new in at-spi2-core 2.45.90:
* xml: Add some documentation.
* xml: Fix event arguments.
(Only the first 15 lines of the commit message are shown above )
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner)
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
games/exult: Add PORTEPOCH
- add PORTEPOCH since original games/exult (1.9.x devel) was moved to
games/exult-devel and now it follows stable release 1.8.
textproc/libxml2: bump all LIB_DEPENDS consumers
This is a separate commit to facilitate easier cherry-picking for
quarterly.
PR: 262853, 262940, 262877, 263126
Approved by: fluffy (mentor)
textproc/libxml2: bump all dependencies
This should make sure that all dependent ports will pick
up the new version commited with a13ec21cd733f67a9fc0dc00ab45268bdc236246
games/exult: fixup after aae00cbee1cef8d51abff5de932f7cf64c62dc87
Apparently, I did not pick up the very last patch in the PR.
This additional commit adds the remaining bits discussed in the PR:
* Convert to DISTVERSION
* Use c++17
* Add missing glib dependency
* Make ALSA optional
* Reorder some variables
PR: 254801
Reported by: gspurki@gmail.com
Add USES=xorg USES=gl, ports categories g
Add USES=xorg and USES=gl to ports in categories starting with 'g'.
While here, try to sprinkle other USES (mostly gnome and sdl) as needed.
Bump PORTREVISION for ports depending on the canonical version of GCC
as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3
to GCC 9.1 under most circumstances now after revision 507371.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.
PR: 238330
games/exult: Fix SDL1 and SDL2 options
There is no opt_CONFIGURE_ARGS helper. Change it to opt_CONFIGURE_ON.
Without this and with both SDL 1.2 and SDL 2 installed in the build
environment it would always pick SDL 1.2 otherwise. Always broken
since r418018.
Bump PORTREVISION for ports depending on the canonical version of GCC
defined via Mk/bsd.default-versions.mk which has moved from GCC 7.4 t
GCC 8.2 under most circumstances.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, as a double check, everything INDEX-11 showed depending on lang/gcc7.
PR: 231590
Bump PORTREVISION for ports depending on the canonical version of GCC
in the ports tree (via Mk/bsd.default-versions.mk and lang/gcc) which
has now moved from GCC 6 to GCC 7 by default.
This includes ports
- featuring USE_GCC=yes or USE_GCC=any,
- featuring USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and those
- with USES=compiler specifying one of openmp, nestedfct, c11, c++0x,
c++11-lib, c++11-lang, c++14-lang, c++17-lang, or gcc-c++11-lib.
PR: 222542
For ports that are marked BROKEN on armv6, and also fail to build on
armv7, mark them so.
This is part two of a multipart commit to bring armv7 ports to parity
with armv6.
Approved by: portmgr (tier-2 blanket)
Obtained from: lonesome.com -exp run
Bump PORTREVISION for ports depending on the canonical version of GCC
(via Mk/bsd.default-versions.mk and lang/gcc) which has moved from
GCC 5.4 to GCC 6.4 under most circumstances.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c++11-lib, c++11-lang,
c++14-lang, c++0x, c11, or gcc-c++11-lib.
PR: 219275
Bump PORTREVISIONs for ports depending on the canonical version of GCC and
lang/gcc which have moved from GCC 4.9.4 to GCC 5.4 (at least under some
circumstances such as versions of FreeBSD or platforms).
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using using Mk/bsd.octave.mk which in turn has USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c++11-lib, c++14-lang,
c++11-lang, c++0x, c11, or gcc-c++11-lib.
PR: 216707
Replace USES=libtool:oldver with USES=libtool or USES=libtool:keepla in
the 32 ports that still use it. Bump PORTREVISION on their dependent
ports except the ones that depend on these:
audio/libogg
audio/libvorbis
devel/pcre
ftp/curl
graphics/jpeg
graphics/libart_lgpl
graphics/tiff
textproc/expat2
textproc/libxslt
In these cases the same trick as in the recent gettext update is used.
(Only the first 15 lines of the commit message are shown above )
- Release ports maintained by games@
games@ team is quite small and inactive, so ports currently assigned
to it cannot be assumed as properly maintained. To not cause confusion
by making it look otherwise, and also to allow and promote adoption
by individual maintainers, release these ports back to the pool. Note
that this does not change the fact that games@ team still takes care
of these ports to excent of its capabilities.
Suggested by: marino
Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.
Part II, Bump PORTREVISIONs.
PR: 192025
Tested by: antoine (-exp runs)
Approved by: portmgr (implicit)
games/exult: Update to latest 1.5.x snapshot (Unbreaks F10+)
The previous version of Exult, 1.2, is considered ancient by the
developers. Morever, it's c++ was horrid, requiring around 3 dozen
patches just to build on equally ancient gcc 4.5.
Exult has not been released yet, but the snapshots are considered
superior even to the last RC release, 1.4.9rc. The C++ code builds
without patches on both gcc 4.7 (DragonFly) and clang from F10 (verified
by Redports)
The Exult Studio was added as an option, it's on by default. I did not
add the Mod or usecode compiler. If somebody wants those, they can be
added as options as well. While updating, support stage.
- Update devel/sdl12 to 1.2.15
- Update audio/sdl_mixer to 1.2.15
- Update graphics/sdl_image to 1.2.12
- Update graphics/sdl_ttf to 2.0.11
- Update graphics/sdl_gfx to 2.0.23
- Update net/sdl_net to 1.2.8
- Bump PORTREVISIONs on ports that depend on one or more packages due to
ABI and shared library version changes
- Update Mk/bsd.sdl.mk accordingly for the new shared library versions
Tested by: exp-run by pav
- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead
PR: 157936
Submitted by: myself
Exp-runs by: pav
Approved by: pav
- Update devel/sdl12 to version 1.2.14.
- Update audio/sdl_mixer to version 1.2.11.
- Update graphics/sdl_gfx to version 2.0.20.
- Update graphics/sdl_image to version 1.2.10.
- Bump portrevisions for all ports depending on audio/sdl_mixer and
graphics/sdl_image.
- Update Mk/bsd.sdl.mk accordingly for the new shared lib versions.
PR: ports/142147ports/142248ports/142249
Approved by: miwi (mentor implicit)
For ports maintained by ports@FreeBSD.org, remove names and/or
e-mail addresses from the pkg-descr file that could reasonably
be mistaken for maintainer contact information in order to avoid
confusion on the part of users looking for support. As a pleasant
side effect this also avoids confusion and/or frustration for people
who are no longer maintaining those ports.
- Fails to link when sdl is installed without aalib. Workaround this by
explicitly stating X11 dependency in a way that configure script can find it.
PR: ports/138422
Submitted by: gonebsd <gonebsd@gmail.com>
Feature safe: yes
Number of commits found: 134 (showing only 100 on this page)
