Update Simgear & Flightgear ports to 2016.1.2

Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.

With hat:	portmgr
Sponsored by:	Absolight

Update Simgear & Flightgear to 2016.1.1

Convert g* and i* to USES=sqlite and USES=firebird

Add LOCALBASE to LDFLAGS to fix build on DragonFly

PR:		202115
Submitted by:	marino

Fix build by explicitly linking to X11

PR:		202115
Submitted by:	leventelist@gmail.com

Add USES=alias to 11 ports (non-invasive DragonFly support)

Convert to USES=jpeg

- Add CPE info

Approved by:	portmgr blanket

While waiting for a bugfix release, backport Nasal security fixes from upstream
git repositories:
- flightgear 6a30e70
- fgdata 60da209

Suggested by:	"Rebecca N. Palmer" <rebecca_palmer@zoho.com>

Update Simgear & Flightgear to 3.4.0

Bump portrevision after png update

Change libpng15.so to libpng.so in LIB_DEPENDS to prepare the upgrade

Replace USES=libtool:oldver with USES=libtool or USES=libtool:keepla in
the 32 ports that still use it.  Bump PORTREVISION on their dependent
ports except the ones that depend on these:

audio/libogg
audio/libvorbis
devel/pcre
ftp/curl
graphics/jpeg
graphics/libart_lgpl
graphics/tiff
textproc/expat2
textproc/libxslt

In these cases the same trick as in the recent gettext update is used.

Remove versioned uses of USE_GCC

Suggested by:	gerald

Update Simgear and Flightgear ports to 3.2.0

PR:		194571
Submitted by:	mike.d.ft402@gmail.com

Remove @dirrm/@dirrmty from my ports

Make D-BUS support optional

PR:		193631
Submitted by:	<mike.d.ft402@gmail.com>

Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.

Part II, Bump PORTREVISIONs.

PR:		192025
Tested by:	antoine (-exp runs)
Approved by:	portmgr (implicit)

Bump PORTREVISION on all ports with USE_SQLITE=yes or USE_SQLITE=3 that
have not been bumped yet after the latest libsqlite3.so library version
change.

Approved by:	portmgr (implicit)

The FreeBSD x11@ and graphics team proudly presents
a zeising, kwm production, with help from dumbbell, bdrewery:

NEW XORG ON FREEBSD 9-STABLE AND 10-STABLE

This update switches over to use the new xorg stack by default on FreeBSD 9
and 10 stable, on osversions where vt(9) is available.
It is still possible to use the old stack by specifying WITHOUT_NEW_XORG in
/etc/make.conf .
FreeBSD 8-STABLE and released versions of FreeBSD still use
the old version.
A package repository with binary packages for new xorg will
be available soon.

This patch also contains updates of libxcb and related ports, pixman, as well

Update Simgear and Flightgear ports to 3.0.0

Chase boost and icu bump
While here convert some LIB_DEPENDS

Update Flightgear and Simgear ports to 2.12.1 (bugfix release)

Convert the tree to USES=openal

Approved by:	portmgr (bapt)

- Update Simgear and Flightgear ports to 2.12.0
- Enable staging
- Switch to new LIB_DEPENDS format
- Refresh Simgear's pkg-descr

Add NO_STAGE all over the place in preparation for the staging support (cat:
games)

- convert USE_CMAKE to USES
- while here clean up some ports from CMAKE_VERBOSE, which is intended
  for users

Approved by:	portmgr (miwi)

Update Simgear & Flightgear ports to 2.10.0

Chase boost update

Update Simgear and Flightgear ports to 2.8.0

- Switch to OptionsNg
- Un-version LIB_DEPENDS

- update png to 1.5.10

Fix build with gcc46+

Submitted by:   avg

Update Simgear and Flightgear ports to 2.6.0

- Update graphics/osg to 3.0.1
- Bump revisions on dependent ports due to shlib version bump
- Remove option to use graphics/osg-devel instead of graphics/osg from simgear
and flightgear (1)
- Remove option to use graphics/osg-devel instead of graphics/osg from fgrun for
consistency

Submitted by:   martymac (1)

- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead

PR:             157936
Submitted by:   myself
Exp-runs by:    pav
Approved by:    pav

- Update FlightGear and SimGear to 2.4.0
- Switch PORTNAMEs to lowercase
- Change DATADIR from ${LOCALBASE}/share/FlightGear
  to ${LOCALBASE}/share/flightgear
- Re-order variables to make portlint happy
- Remove useless CPPFLAGS from CONFIGURE_ENV

PR:     ports/160322, ports/160421
Submitted by:   amdmi3

-remove MD5

- Add missing LICENSE
- Cleanup MASTER_SITES

Approved by:    ehaupt (mentor)

Update MAINTAINER address for my ports

Approved by:    ehaupt (mentor)

- Update MAINTAINER address for Ganael Laplanche <ganael.laplanche@martymac.org>
- Update some MASTER_SITES too

PR:             ports/150349
Submitted by:   maintainer

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

- Bump revisions on ports that use networking functions from plib after it was
updated (flightgear and friends seem to be the only such ports)

PR:             144575
Submitted by:   Ganael Laplanche <ganael.laplanche@martymac.com>
Approved by:    portmgr (pav)

- Update to 2.0.0

PR:             ports/144462
Submitted by:   Ganael Laplanche <ganael.laplanche@martymac.com> (maintainer)
Feature safe:   yes

- update to jpeg-8

- Introduce USE_OPENAL variable for OpenAL consumers
- Switch to openal-soft as a default OpenAL implementation

PR:             ports/142123
Submitted by:   mva
Tested by:      pointyhat exp-run
Approved by:    portmgr (hat)

- Remove BROKEN on 8.x, no longer needed
- While here, mark MAKE_JOBS_UNSAFE, as it fails to build with forced jobs

PR:             139235
Submitted by:   Ganael Laplanche <ganael.laplanche@martymac.com>

- bump all port that indirectly depends on libjpeg and have not yet been bumped
or updated
Requested by:   edwin

- Update boost to 1.39
- Split boost port to separate components, with boost-all metaport

PR:             ports/137054
Submitted by:   Alexander Churanov <churanov.port.maintainer@gmail.com>
(maintainer)

- Chase graphics/osg-devel shlib version bump

- Mark BROKEN on recent -CURRENT because of x11-toolkits/plib problem

PR:             133485
Submitted by:   Ganael Laplanche <ganael dot laplanche at martymac dot com>
(maintainer)

- Chase graphics/osg and graphics/osg-devel shlibver bumps

- Add optional support for graphics/osg-devel, which should fix some rendering
bugs

PR:             131613
Submitted by:   Ganael Laplanche <ganael dot laplanche at martymac dot com>
(maintainer)

- This port has no slave pors, so no need for PORTNAME?=, FGVERSION and other
magic.

PR:             131418
Submitted by:   Ganael Laplanche <ganael dot laplanche at martymac dot com>
(maintainer)

- Add two dependencies (although they are installed by devel/simgear, flightgear
explicitely checks for them) [1]
- Update to 1.9.1 [2]

PR:             130789 [1], 131199 [2]
Submitted by:   Ganael Laplanche <ganael dot laplanche at martymac dot com>
(maintainer)

- Update X.org ports to 7.4+ (few ports are more recent than the katamari).
- Bump PORTREVISION for all ports depending on libglut since the shlib
version number went from 4 to 3.
- Bump PORTREVISION for all ports depending on libXaw as libXaw.so.8 isn't
installed anymore.
- Couple of ports fixes (mostly missing xorg components added to USE_XORG).

- Update to 1.9.0

PR:             130131
Submitted by:   Ganael Laplanche <ganael.laplanche@martymac.com> (maintainer)

Update CONFIGURE_ARGS for how we pass CONFIGURE_TARGET to configure script.
Specifically, newer autoconf (> 2.13) has different semantic of the
configure target. In short, one should use --build=CONFIGURE_TARGET
instead of CONFIGURE_TARGET directly. Otherwise, you will get a warning
and the old semantic may be removed in later autoconf releases.

To workaround this issue, many ports hack the CONFIGURE_TARGET variable
so that it contains the ``--build='' prefix.

To solve this issue, under the fact that some ports still have
configure script generated by the old autoconf, we use runtime detection
in the do-configure target so that the proper argument can be used.

Changes to Mk/*:
 - Add runtime detection magic in bsd.port.mk

- Add more downloading locations

PR:             ports/123414
Submitted by:   Ganael Laplanche <ganael.laplanche@martymac.com> (maintainer)

- Update to 1.0.0
- Pass maintainership to submitter

PR:             123337
Submitted by:   Ganael Laplanche <ganael.laplanche@martymac.com>

Reset jylefort's port maintainerships.  portmgr has taken his commit bit
into safekeeping due to inactivity.

- Remove unneeded dependency from gtk12/gtk20 [1]
- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Remove X11BASE support in favor of LOCALBASE or PREFIX
- Use USE_LDCONFIG instead of INSTALLS_SHLIB
- Remove unneeded USE_GCC 3.4+

Thanks to all Helpers:
        Dmitry Marakasov, Chess Griffin, beech@, dinoex, rafan, gahr,
        ehaupt, nox, itetcu, flz, pav

PR:             116263
Tested on:      pointyhat
Approved by:    portmgr (pav)

- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Bump PORTREVISION

Approved by:    portmgr (xorg cleanup)

Remove always-false/true conditions based on OSVERSION 500000

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

- Update to 0.9.10 and drop FreeBSD 4.x support
- Install js_server

- Update graphics/libglut to 6.4.1.
- Shared lib version and PORTREVISION bumb for all affected ports.

While I'm here:
- Remove USE_MESA knob where it was (35 ports).
  It marked as depricated for 2 years.

PR:             ports/90247
Submitted by:   Ermal Lu?i <eri--@albabsd.org>

Accommodate the flightgear-l410 slave port.

Chase the plib update by bumping PORTREVISION, since it is statically
linked in.

- Update to 0.9.9
- Move to ${X11BASE}

- Respect ${X11BASE} [1]
- Respect ${PTHREAD_CFLAGS}
- Add a pkg-message advicing the user to increase the data size limit
- Cleanup the Makefile

Reported by:    pointyhat via kris [1]

Take maintainership.

Drop maintainership.

Do not die when a floating point exception occurs in the nvidia GL
library (ignore SIGFPE).

PR:             ports/86220
Submitted by:   jylefort
Approved by:    maintainer timeout (17 days)

- Fix build on FreeBSD 4.X

PR:             ports/80740
Submitted by:   Martin Kaeske <Martin.Kaeske@Stud.TU-Ilmenau.DE>
Approved by:    maintainer timeout (des; 4 months)

Upgrade to 0.9.8.

BROKEN on 4.x: Does not compile

Approved by:    portmgr (self)

Update to 0.9.6.  Note that scenery, textures and aircraft models are now
installed by a separate port, games/fgfs-base, which this one lists as a
run-time dependency.

BROKEN on 5.x: Does not compile

Approved by:    portmgr (self)

Add missing glut dependency, remove BROKEN.

PR:             ports/69245
Submitted by:   Erik Greenwald <erik@smluc.org>

BROKEN: Missing dependency

SIZEify; group distfiles.

Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.

(Part 2)

Use the CPIO macro defined in bsd.port.mk.

Updated plist which I forgot to commit yesterday.

Remove dependency on metakit, which is no longer used.

Fix typo in post-extract.

Spotted by:     Olivier Saut <Olivier.Saut@gmm.insa-tlse.fr>

Upgrade to 0.9.3.

[patch][non-maintainer] add use_gmake to games/flightgear

        Per bento, this port seems to require having USE_GMAKE set.
        (This probably doesn't really affect most users).  Also,
        while fiddling around, pacify portlint a bit.

Informed maintainer.

PR:             ports/56514
Submitted by:   Mark Linimon <linimon@lonesome.com>

Left out a line in previous commit.

Upgrade to 0.9.2.

Clear moonlight beckons.
Requiem mors pacem pkg-comment,
And be calm ports tree.

E Nomini Patri, E Fili, E Spiritu Sancti.

Use threads.  Temporarily add an extra dependency on SimGear to make sure
we get a version that was compiled with thread support.

Unbotch the previous commit: metakit is in LOCALBASE, not X11BASE.

Add metakit to dependency list.  I thought it was already included
indirectly, but apparently it wasn't.

BUILD_DEPENDS isn't enough, we need RUN_DEPENDS as well so the dependency
gets registered in the package.  This should unbreak the bento builds of
games/flightgear.

Remove a duplicate of patch-aa that snuck in here.

Take over maintainership (Brian says he's too busy flying real planes).
Update to 0.9.1.  So much has changed since 0.6.1 that I've practically
had to redo the port from scratch.  It builds and installs fine now, but
due to limited resources I haven't been able to actually run it.

Remove USE_NEWGCC, which is no longer supported or required.

Submitted by:   Tilman Linneweh <tilman@arved.de>
PR:             ports/40571