Remove expired ports:
2019-06-30 sysutils/cfengine33: No longer supported upstream
2019-06-30 sysutils/cfengine-masterfiles38: No longer supported upstream
2019-06-30 sysutils/cfengine39: No longer supported upstream
2019-06-30 sysutils/cfengine-masterfiles37: NO longer supported upstream
2019-06-30 sysutils/cfengine37: No longer supported upstream
2019-06-30 net/morebalance: Abandonware and depends on expiring games/libggz
2019-06-30 sysutils/cfengine36: No longer supported upstream
2019-06-30 sysutils/cfengine-masterfiles36: No longer supported upstream
2019-06-30 sysutils/cfengine34: No longer supported upstream
2019-06-30 sysutils/cfengine35: No longer supported upstream
2019-06-30 sysutils/cfengine-masterfiles39: No longer supported upstream
2019-06-30 devel/py-typed-ast12: Use devel/py-typed-ast instead
2019-06-30 devel/rubygem-devise-rails50: Use devel/rubygem-devise (depends on
Rails 5.0) instead
2019-06-30 security/rubygem-devise-two-factor-rails50: Use
security/rubygem-devise-two-factor (depends on Rails 5.0) instead

Deprecate games/libggz and net/morebalance too after r504235

Remove all _USE=openssl occurrences.

Sponsored by:	Absolight

Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.

With hat:	portmgr
Sponsored by:	Absolight

- Update security/gnutls to 3.4.10.
- Rename the LIBDANE option DANE because that's the name of the protocol
  supported by libgnutls-dane and gnutls-cli.  Also clarify the option
  description.
- Add an IDN option.
- libgnutls-openssl has been removed in 3.4.  Some ports used this library
  in their LIB_DEPENDS but no port actually required it.
- Some old API functions have been removed.  Ports that used these have been
  updated or patched to use the new API.
- Add a patch to print/cups to prevent overlinking of libgnutls.so.
- Bump PORTREVISION on dependent ports.

net-im/jabber: This port used the old API to give users fine grained
control over which crypto algorithms were used via a configuration file.
It's not immediately obvious how to port this to the new API so the port
always uses the defaults now.

www/hydra: Mark BROKEN.  This uses more removed calls than the other ports,
is said to be alpha quality and not fully functional and has been abandoned
10 years ago.

PR:		207768
Exp-run by:	antoine
Approved by:	portmgr (antoine)

MASTER_SITES cleanup.

- Replace ${MASTER_SITE_FOO} with FOO.
- Merge MASTER_SITE_SUBDIR into MASTER_SITES when possible. (This means 99.9%
  of the time.)
- Remove occurrences of MASTER_SITE_LOCAL when no subdirectory was present and
  no hint of what it should be was present.
- Fix some logic.
- And generally, make things more simple and easy to understand.

While there, add magic values to the FESTIVAL, GENTOO, GIMP, GNUPG, QT and
SAMBA macros.

Also, replace some EXTRACT_SUFX occurences with USES=tar:*.

Checked by:	make fetch-urlall-list
With hat:	portmgr
Sponsored by:	Absolight

security/libgcrypt: 1.6.1 -> 1.6.2, bump depends

Changes:
- src/sexp.c (do_vsexp_sscan): Return error for invalid args.
- cipher/md.c (_gcry_md_info): Fix a segv in case of calling
  with wrong parameters.
- cipher/primegen.c (_gcry_generate_elg_prime): Change to return an
  error code, possible NULL deref in call to prime generator.
- cipher/dsa.c (generate): Take care of new return code.
- cipher/elgamal.c (generate): Change to return an error code.  Take
	care of _gcry_generate_elg_prime return code.
- ecc: Support the non-standard 0x40 compression flag for EdDSA.
- mpi: Extend the internal mpi_get_buffer.
- mpi: Fix regression for powerpc-apple-darwin detection.
- Fix bug inhibiting the use of the sentinel attribute in src/gcrypt.h.in

- Drop .la files for games/libggz, no dependees require them
- Bump dependent ports as .so version has changed

Approved by:	portmgr blanket

security/libgcrypt: 1.5.3_3 -> 1.6.1

- Update to 1.6.1
- Remove some unneeded patches
- Fix pkg-plist
- report configure bug upstream
  https://bugs.g10code.com/gnupg/issue1668
- report API breakage downstream and find that MacPorts had the same issue
  https://rt.cpan.org/Ticket/Display.html?id=97201
- bump PORTREVISION for dependent ports (approx. 100 ports)
- Thanks to exp-run by antoine@ to find ports that break
- patch ports that would otherwise break
  security/shishi with PR 192164 is already committed
  [1] devel/ccrtp
  [2] editors/abiword
  [3] security/p5-Crypt-GCrypt

PR:		191256, 192162 [1], 192163 [2], 192166 [3]
Submitted by:	Carlos Jacobo Puga Medina <cjpugmed@gmail.com>
Approved by:	maintainer timeout, antoine (exp-run), portmgr (implicit)

- Replace security/gnutls with security/gnutls3 and update to 3.2.15
- Bump PORTREVISION on all ports that depend on security/gnutls and
  adjust all ports that depend on security/gnutls3
- Update mail/anubis to version 4.2 which supports gnutls 3.x
- Update mail/libvmime to a development snapshot (recommended by upstream
  developers)

PR:		191274
Exp-run by:	antoine
Approved by:	portmgr (antoine)

When linking a library libA with a library libB using libtool, if libB.la
exists, libtool will add all libraries libB.la refers to (dependency_libs
field) to the linker command line and store them in the dependency_libs
field of libA.la.  So everything that subsequently links with libA will also
link to these extra libraries.  This causes too much overlinking.

This commit modifies Mk/Uses/libtool.mk so it empties the dependency_libs
field in .la libraries during staging.  However, because .la libraries have
very limited use when dependency_libs is empty it makes sense to completely
remove them during staging.

So with this commit USES=libtool is modified to remove .la libraries and a
new form (USES=libtool:keepla) is introduced in case they need to be kept
(dependency_libs is still emptied).

games/libggz and games/ggz-* ports:
- Switch to USES=libtool:oldver
- Convert LIB_DEPENDS to new style
- Add stage support
- Use install-strip target
- Remove deprecated PTHREAD_FLAGS/LIBS
- Use options helpers
- Add missing NLS option to OPTIONS_DEFINE [1]
- Drop maintainership: kdegames don't need these ports anymore

Prompted by:	ehaupt [1]

Add NO_STAGE all over the place in preparation for the staging support (cat:
games)

games/*ggz*: Convert include from absolute to relative path

In certain build setups, the use of an absolute path will cause the
build to break.

Approved by:	bapt (mentor)

Chase security/libgcrypt update

This changes almost all the "gnomehack" only USE_GNOME cases to USES= pathfix.

If a port used other USE_GNOME items it was untouched.
The ports that used other USES were fixed by hand.

PR:		ports/177081
Reviewed by:	bapt
Approved by:	portmgr (miwi)

- Add UPDATING entry for gnutls update
- Chase shlib version bump for dependant ports

- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead

PR:             157936
Submitted by:   myself
Exp-runs by:    pav
Approved by:    pav

Remove USE_GNOME=gnometarget from ports. It has been a empty keyword since
mid 2008.

PR:             ports/159624
Submitted by:   Ruslan Mahmatkhanov <cvs-src@yandex.ru>

-remove MD5

- Chase the libgcrypt shared lib version

Chase security/gnutls update and add an UPDATING entry.

Sync to new bsd.autotools.mk

Chase security/libgcrypt shlib bump.

PR:             ports/148755
Submitted by:   Hirohisa Yamaguchi <umq@ueo.co.jp>

Take maintainership for kde@

Bump PORTREVISIONs of the gnutls dependant ports to chase gnutls update.

-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.

It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.

With help:      marcus and kwm
Pointyhat-exp:  a few times by pav
Tested by:      pgollucci, "Romain Tartière" <romain@blogreen.org>, and
                a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by:    marcus
Approved by:    portmgr

- Bump PORTREVISION due to share library version bump in security/libgcrypt

PR:              ports/127478

Reset yinjieh@csie.nctu.edu.tw due to lack of time to work on ports
right now, by request.

Hat:    portmgr

Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)

- Update to 0.0.14.1

PR:             ports/121493
Submitted by:   Jens Rehsack <rehsack at web.de>
Approved by:    Ying-Chieh Chen <yinjieh at csie.nctu.edu.tw> (maintainer)

Add a dependency, libgcrypt, it has autocheck in its configure and will
enabling by default if libgcrypt exists in system. Bump the PORTREVISION.

Approved by:    Ying-Chieh Chen <yinjieh@csie.nctu.edu.tw> (maintainer)

- Chase security/gnutls shlib version bump
- Add an entry to UPDATING

- Set --mandir and --infodir in CONFIGURE_ARGS if the configure script
  supports them.  This is determined by running ``configure --help'' in
  do-configure target and set the shell variable _LATE_CONFIGURE_ARGS
  which is then passed to CONFIGURE_ARGS.
- Remove --mandir and --infodir in ports' Makefile where applicable
  Few ports use REINPLACE_CMD to achieve the same effect, remove them too.
- Correct some manual pages location from PREFIX/man to MANPREFIX/man
- Define INFO_PATH where necessary
- Document that .info files are installed in a subdirectory relative to
  PREFIX/INFO_PATH and slightly change add-plist-info to use INFO_PATH and
  subdirectory detection.

PR:             ports/111470
Approved by:    portmgr
Discussed with: stas (Mk/*), gerald (info related stuffs)
Tested by:      pointyhat exp run

Chase gnutls shared library version chase: adjust DEPENDS lines and
bump PORTREVISIONs.

- Update ggz ports to 0.0.14
- Introduce bsd.ggz.mk to simplify all ggz ports
- Remove 4.x support

Approved by:     Ying-Chieh Chen (maintainer)

Use libtool port instead of included version to avoid objformat a.out botch

- Chase security/gnutls update
- Add an entry to UPDATING
- Pet portlint(1) for some ports while I'm here

Chase gnutls shlib version change.

- Update to 0.0.13
- Mark BROKEN on 4.x

PR:             96179
Submitted by:   Ying-Chieh Chen <yinjieh@csie.nctu.edu.tw> (maintainer)

Conversion to a single libtool environment.

Approved by:    portmgr (kris)

SHA256ify

Approved by:    krion@

Chase gnutls update.

Mass-conversion to the USE_AUTOTOOLS New World Order.  The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.

Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.

Preliminary documentation can be found at:
        http://people.FreeBSD.org/~ade/autotools.txt

which is in the process of being SGMLized before introduction into the
Porters Handbook.

Light blue touch-paper.  Run.

yinjieh take over all ggz* ports

- Update to 0.0.12

PR:             ports/87384
Submitted by:   Ports Fury

- Update to 0.0.11

PR:             ports/81508
Submitted by:   KATO Tsuguru <tkato432@yahoo.com>

Update to version 0.0.10

PR:             ports/76762
Submitted by:   Ports Fury

Remove contiguous blank line.

Update to version 0.0.9

PR:             ports/69296
Submitted by:   Ports Fury

- Fix build

Update libgcrypt to the new stable version 1.2.0
Retire libgcrypt-devel

Switch back to security/libgcrypt and bump PORTREVISION for
- gnutls
- gnutls-devel
- gsasl
- opencdk
- vpnc

libggz:
- Remove dependency on libgcrypt, because the port does not yet
work with the new libgcrypt

libksba:

- Update to version 0.0.8

PR:             ports/62818
Submitted by:   Ports Fury

SIZEify.

add libggz 0.0.7
The GGZ Gaming Zone - Base Library