Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

games: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  <benlutz@datacomm.ch>
  *  <janos.mohacsi@bsd.hu>
  *  Aaron Baugher
  *  Aaron Dalton <aaron@FreeBSD.org>
  *  Aaron Dalton <aaron@daltons.ca>
  *  Aaron VonderHaar <avh4@usa.net>
  *  Aaron Zauner <az_mail@gmx.at>
  *  Adam Kranzel (adam@alameda.edu)
  *  Adam Weinberger <adamw@FreeBSD.org>
  *  Ade Lovett <ade@FreeBSD.org>
  *  Akinori MUSHA aka knu <knu@idaemons.org>

games/openmortal: prepare for freetype2 update

- freetype2 will no longer ship freetype-config (which was a pkg-config
  wrapper) in the near future -- use pkg-config to gather the required
  flags.

PR:             251512

Remove # $FreeBSD$ from Makefiles.

games: Add missing USES={gnome,gl,sdl,xorg}

Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.

With hat:	portmgr
Sponsored by:	Absolight

Replace USES=libtool:oldver with USES=libtool or USES=libtool:keepla in
the 32 ports that still use it.  Bump PORTREVISION on their dependent
ports except the ones that depend on these:

audio/libogg
audio/libvorbis
devel/pcre
ftp/curl
graphics/jpeg
graphics/libart_lgpl
graphics/tiff
textproc/expat2
textproc/libxslt

In these cases the same trick as in the recent gettext update is used.

Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.

Part II, Bump PORTREVISIONs.

PR:		192025
Tested by:	antoine (-exp runs)
Approved by:	portmgr (implicit)

- Convert net/sdl_net to USES=libtool and bump dependent ports
- Add INSTALL_TARGET=install-strip

Approved by:	portmgr (implicit, bump unstaged port)

Remove indefinite articles and trailing periods from COMMENT, plus
minor COMMENT typos and surrounding whitespace fixes. Categories G-I.

CR:		D201
Approved by:	portmgr (bapt)

- Convert USE_BZIP2 and USE_DOS2UNIX to USES

The FreeBSD x11@ and graphics team proudly presents
a zeising, kwm production, with help from dumbbell, bdrewery:

NEW XORG ON FREEBSD 9-STABLE AND 10-STABLE

This update switches over to use the new xorg stack by default on FreeBSD 9
and 10 stable, on osversions where vt(9) is available.
It is still possible to use the old stack by specifying WITHOUT_NEW_XORG in
/etc/make.conf .
FreeBSD 8-STABLE and released versions of FreeBSD still use
the old version.
A package repository with binary packages for new xorg will
be available soon.

This patch also contains updates of libxcb and related ports, pixman, as well

Update freetype to 2.5.2.

Remove patch to add -I/usr/local/include in freetype-config --cflags. If
ports need extra headers they should look for them, and not get them via
a side-effect.

Freetype had a header resuffle in 2.5.1, patch ports to use the new header
style.

Thanks go to bdrewery for the two exp-runs and rakuco for helping me with
some troublesome cmake ports.

PR:		ports/184587

- Support staging
- Use new LIB_DEPENDS syntax

Add NO_STAGE all over the place in preparation for the staging support (cat:
games)

- convert to the new perl5 framework
- trim Makefile header

Approved by:	portmgr (bapt@, blanket)

- Trim Makefile headers
- Drop ABI versions from LIB_DEPENDS
- OptionsNG
- Pet portlint
- Switch to dynamic plist where useful
- Canonicalize patch names
- Fix DOS line endings in patch files

- Trim Makefile headers
- Drop ABI versions from LIB_DEPENDS
- OptionsNG
- Pet portlint
- Switch to dynamic plist where useful

- update png to 1.5.10

- Update devel/sdl12 to 1.2.15
- Update audio/sdl_mixer to 1.2.15
- Update graphics/sdl_image to 1.2.12
- Update graphics/sdl_ttf to 2.0.11
- Update graphics/sdl_gfx to 2.0.23
- Update net/sdl_net to 1.2.8
- Bump PORTREVISIONs on ports that depend on one or more packages due to
ABI and shared library version changes
- Update Mk/bsd.sdl.mk accordingly for the new shared library versions

Tested by:      exp-run by pav

- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead

PR:             157936
Submitted by:   myself
Exp-runs by:    pav
Approved by:    pav

-remove MD5

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

- update to jpeg-8

- Update devel/sdl12 to version 1.2.14.
- Update audio/sdl_mixer to version 1.2.11.
- Update graphics/sdl_gfx to version 2.0.20.
- Update graphics/sdl_image to version 1.2.10.
- Bump portrevisions for all ports depending on audio/sdl_mixer and
  graphics/sdl_image.
- Update Mk/bsd.sdl.mk accordingly for the new shared lib versions.

PR:             ports/142147 ports/142248 ports/142249
Approved by:    miwi (mentor implicit)

- bump all port that indirectly depends on libjpeg and have not yet been bumped
or updated
Requested by:   edwin

Update CONFIGURE_ARGS for how we pass CONFIGURE_TARGET to configure script.
Specifically, newer autoconf (> 2.13) has different semantic of the
configure target. In short, one should use --build=CONFIGURE_TARGET
instead of CONFIGURE_TARGET directly. Otherwise, you will get a warning
and the old semantic may be removed in later autoconf releases.

To workaround this issue, many ports hack the CONFIGURE_TARGET variable
so that it contains the ``--build='' prefix.

To solve this issue, under the fact that some ports still have
configure script generated by the old autoconf, we use runtime detection
in the do-configure target so that the proper argument can be used.

Changes to Mk/*:
 - Add runtime detection magic in bsd.port.mk

Update my email address in 132 ports.

Approved by:    miwi (mentor)

- Chase devel/sdl12 shlib version bump

- Unbreak
- Fix build with gcc 4.2
- Pass maintainership to submitter
- Use SF macro

PR:             117702
Submitted by:   Dmitry Marakasov <amdmi3@amdmi3.ru>
Approved by:    portmgr (pav)

BROKEN with gcc 4.2

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

- Remove FreeBSD 4.X support from unmaintained ports in categories starting
  with letter f-h

 - Update devel/sdl12 to version 1.2.11. Now we employ stock SDL directory
   structure (i.e. include/SDL for includes and sdl-config for configuration
   binary)
 - Update graphics/sdl_ttf to version 2.0.8
 - Update graphics/sdl_image to version 1.2.5
 - Update audio/sdl_mixer to version 1.2.7
 - Update net/sdl_net to version 1.2.6
 - Update Mk/bsd.sdl.mk accordingly
 - Fix dependent ports to fit the new directory structure and avoid several
   API breakages
 - Bump up portrevisions for all dependent ports to allow them to be upgraded
   by portupgrade/portmaster etc tools

Approved by:    kris (portmgr), sem (mentor)

Remove USE_REINPLACE for categories starting with a G

- Add SHA256

Let the IGNORE message make a bit more sense and change it from:

===>  p5-Some-Module-0.7 Port requires perl 5.6.x or later. Install
lang/perl5 then try again.

to:

===>  p5-Some-Module-0.7 requires perl 5.6.x or later. Install
lang/perl5 then try again.

Approved by:    silence on -ports

At Kris's request, back out the MACHINE_ARCH spelling correction until
after 5.4-RELEASE.

Assist getting more ports working on AMD64 by obeying the
Ports Collection documentation and use 'ARCH' rather than 'MACHINE_ARCH'.

Drop maintainership.

- Update to version 0.7

- Open Mortal is a parody of the once popular coin-up fighting
  game, Mortal Kombat