games/py-mnemosyne-proj: Update to 2.11

- Rename to match PyPI name
- Switch to DISTVERSION
- Switch to pep517 build
- Remove run dependency on textproc/py-googletrans as upstream changed
  it to a new and optional dependency, not ported yet (google-trans-new)

ChangeLog:	https://mnemosyne-proj.org/whats-new
PR:		274972

games/py-mnemosyne: Add missing run depend

Add QT sqldriver-sqlite missing run depend needed for browsing cards.

PR:		274972
Reported by:	Andreas Kempe
MFH:		2023Q4

devel/qt6: bump dependent ports

audio/opus: bump consumers after update to 1.4

*: Bump PORTREVISIONs for math/mpc update to 1.3.1

PyQt: Update to latest versions

- PyQt5: update to 5.15.9
- PyQt6: upate to 6.4.2
- PyQt6-sip: update to 13.4.1
- PyQt5-sip: update to 12.11.1
- PyQt-builder: update to 1.14.1
- sip: upate to 6.7.7

PR:		269751
Exp-run by:	antoine

games/py-mnemosyne: Update to 2.10.1

ChangeLog: https://mnemosyne-proj.org/whats-new

games/py-mnemosyne: Bump PORTREVISION

- forgot to bump PORTREVISION for 3e8cf93 (fix rerolled tarball distinfo)

games/py-mnemosyne: Fix distinfo

Reported by:	pkg-fallout

games/py-mnemosyne: Adopt/Update to 2.10

ChangeLog: https://mnemosyne-proj.org/whats-new

games/py-mnemosyne: fix DEPENDS

Mk/Uses: always use colon for build/run suffix

Most USES use a colon for build/run(/test) suffixes. Change kde.mk,
qt.mk and pyqt.mk to do the same, and update all ports using that.

Document in CHANGES.

PR:			266034
Exp-run by:		antoine
Approved by:		tcberner (mentor)
Differential Revision:	https://reviews.freebsd.org/D36349

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

games: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  <benlutz@datacomm.ch>
  *  <janos.mohacsi@bsd.hu>
  *  Aaron Baugher
  *  Aaron Dalton <aaron@FreeBSD.org>
  *  Aaron Dalton <aaron@daltons.ca>
  *  Aaron VonderHaar <avh4@usa.net>
  *  Aaron Zauner <az_mail@gmx.at>
  *  Adam Kranzel (adam@alameda.edu)
  *  Adam Weinberger <adamw@FreeBSD.org>
  *  Ade Lovett <ade@FreeBSD.org>
  *  Akinori MUSHA aka knu <knu@idaemons.org>

games/py-mnemosyne: return to pool

fix previous commit

games/py-mnemosyne: Update to 2.9 and return to pool

devel/py-qt5, devel/py-sip: Update versions

- Update sip to 6.5.1
- Update PyQt5 to 5.15.6
- Update PyQtChart, PyQtNetworkAuth and PyQtWebengine to 5.15.5
- Update PyQtSip to 12.9.1
- Update PyQtBuilder to 1.12.2
- Add ${_MAKE_JOBS} for pyqt.mk (reported by Tatsuki Makino)

PR:		261685
Exp-run by:	antoine

PyQt: Update sip to 6.5.0, reintroduce sip4 and simplify PyQt framework.

SIP:
As mentioned in the update from sip to sip5, this is a transitional version
to remove what is deprecated in sip4.
Sip6 completely removes the deprecated parts.
Unfortunately, some ports — mostly cura things — can not use sip6, so we
reintroduce sip4.

PyQt:
At the same time, we took the opportunity to simplify PyQT and propose only one
package as for devel/pyside2. */py-qt5-* have been merged — excepted chart,
networkauth and webengine — into devel/py-qt5-pyqt.

This allows us to be in adequacy with the packages that the author of these

cleanup: remove transitive py27 deprecation (www/qt5-webengine)

Remove # $FreeBSD$ from Makefiles.

Mark ports recursively depending on Python 2.7 for expiration on June 23.

For ports optionally dependending on Python 2.7, just mark those options
as expired. Remove konquerer from the x11/kde-baseapps metaport and bump
its PORTREVISION.

Submitted by:	rene
Reviewed by:	portmgr, adridg, ehaupt, lme, madpilot, pizzamig, se, sunpoet, yuri
Approved by:	portmgr
Differential Revision:	https://reviews.freebsd.org/D28665

PyQt5: Update PyQt5 to 5.15.4 and py-qtbuilder to 1.9.1

PR:		254218
Exp-run by:	antoine

PyQt5: Update PyQt5 to 5.15.3, QScintilla2 to 2.12.0, py-qtbuilder to 1.9.0

* PyQt5: update to 5.15.3

This is a minor feature and bug-fix release. There are corresponding releases of
the other PyQt5-related packages.

 - Added the missing QImage.setAlphaChannel().
 - Support for the QtNetworkAuth library has been moved to a separate
PyQtNetworkAuth package.
 - Wheels no longer bundle the corresponding Qt libraries and instead
automatically install them from an external wheel.

* QScintilla2: update to 2.12.0

This adds support for Qt6 and removes support for Qt4.

 - Change the new distname (again)i due to a conflict
 - Use the new sip-build system

* devel/py-qtbuilder: update to 1.9.0
* devel/py-sip: fix flavor for sip-distinfo

PR:		253865
Exp-run by:	antoine

Update PyQt5 to 5.15.2, sip to 5.5.0, py-qtbuilder to 1.6.0 and py-qt5-sip to
12.8.1

PR:		251764
Exp-run by: antoine

games/py-mnemosyne: Update to 2.7.3

- Uses shebangfix and dos2unix on py files and mnemosyne bin
- Update to 2.7.3

  - https://github.com/mnemosyne-proj/mnemosyne/blob/master/ChangeLog#L13

Reported by:	portscout

Add education virtual category

PR:		248402
Submitted by:	PauAmma

Update PyQt to 5.15.0, py-sip to 4.19.24 and qscintilla2 to 2.11.5

- Update PyQt to 5.15.0, py-sip to 4.19.24 and qscintilla2 to 2.11.5
- Use pypi for PYQT [1]
- Add devel/py-qt5-sip (Don't use it for now. It will be used in future updates
of PyQt with py-sip >= 5)
- Add missing py-qt5 ports: comms/py-qt5-sensors, devel/py-qt5-location,
devel/py-qt5-remoteobjects, net/py-qt5-networkauth
- Strip libs
- Refactor *_PATH and *_PORT parts

[1] RiverBankComputing doesn't offer links to download latest version of some
ports

PR:		247369
Reviewed by:	tcberner
Differential Revision:	https://reviews.freebsd.org/D25749
Exp-run by:	antoine

games/py-mnemosyne: Take Maintainer'ship, fix runtime error and add missing
dependencies

Latest version of games/py-mnemosyne requires new dependencies. This commit adds
the missing dependencies:

 - audio/py-gtts
 - security/py-gtts-token (required by audio/py-gtts)
 - textproc/py-googletrans

The games/py-mnemosyne port needs to be limited to Python 3.7+ to keep the
dependency chains intact. This is because textproc/py-googletrans depends on
www/py-httpx which is only for Python 3.7+.

PR:		247595
Submitted by:	kai
Reported by:	gspurki@gmail.com
Approved by:	tcberner (mentor)
MFH:		2020Q3
Differential Revision:	https://reviews.freebsd.org/D25895

games/py-mnemosyne: Update to 2.7.1

Approved by:	tcberner (mentor, implicit)
Differential Revision:	https://reviews.freebsd.org/D25484

Update py-sip to 4.19.21 and qscintilla2 to 2.11.4

  - Update py-sip to 4.19.21
  - Update qscintilla2 to 2.11.4
  - Replace MASTER_SITE_RIVERBANK with https versions
  - Replace QSCI2_DISTNAME to match with the new one

PR:		245308
Approved by:	tcberner (mentor)
Exp-run by:	antoine

Convert the tree to use PY_PILLOW

With hat:	portmgr
Originally submitted by:	kai

Bump PORTREVISION for ports depending on the canonical version of GCC
as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3
to GCC 9.1 under most circumstances now after revision 507371.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.

PR:		238330

Fix Qt5 symbol version scripts to put the catch-all clause first.  When
a symbol matches multiple clauses the last one takes precedence.  If the
catch-all is last it captures everything.  In the case of Qt5 libraries
this caused all symbols to have a Qt_5 label while some should have
Qt_5_PRIVATE_API.  This only affects lld because GNU ld always gives the
catch-all lowest priority.

Older versions of Qt5Webengine exported some memory allocation symbols from
the bundled Chromium.  Version 5.9 stopped exporting these [1] but the
symbols were kept as weak wrappers for the standard allocation functions to
maintain binary compatibility. [2][3]  The problem is that the call to the
standard function in these weak wrappers is only resolved to the standard
function if there's a call to this standard function in other parts of
Qt5Webengine, because only then is there a non-weak symbol that takes
precedence over the weak one.  If there's no such non-weak symbol the call

Bump PORTREVISION for ports depending on the canonical version of GCC
defined via Mk/bsd.default-versions.mk which has moved from GCC 7.4 t
GCC 8.2 under most circumstances.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, as a double check, everything INDEX-11 showed depending on lang/gcc7.

PR:		231590

pyqt: Change install directories for Python flavor support

* PyQt could not be installed for multiple Python versions at
  the same time, as there were conflicting files.

  This patch creates Python-version versioned directories for
  all these, and further installs binaries with a version number.

* Note, there might be some hickups for software that depends on
  on of the .so's provided by PyQt5, which might not be found
  anymore autmotically, and maybe need some LD-flaggery.

* Update PyQt5 to 5.10.1

* Mark www/py-qt5-webengine broken. It is unforuntately no longer
  compatible with the old qt5-webengine-5.9.4 we ship.

PR:		232745
Exp-run by:	antoine
Differential Revision:	https://reviews.freebsd.org/D8714

- Update to 2.6.1

PR:		230587
Submitted by:	maintainer
Sponsored by:	iXsystems Inc.

games/py-mnemosyne: Update to 2.6

PR:		229169
Submitted by:	Kai <freebsd_ports@k-worx.org>

Bump PORTREVISIONs of all users of math/mpc that we just updated to
version 1.1.0 (via revision 464079).

Convert Python ports to FLAVORS.

  Ports using USE_PYTHON=distutils are now flavored.  They will
  automatically get flavors (py27, py34, py35, py36) depending on what
  versions they support.

  There is also a USE_PYTHON=flavors for ports that do not use distutils
  but need FLAVORS to be set.  A USE_PYTHON=noflavors can be set if
  using distutils but flavors are not wanted.

  A new USE_PYTHON=optsuffix that will add PYTHON_PKGNAMESUFFIX has been
  added to cope with Python ports that did not have the Python
  PKGNAMEPREFIX but are flavored.

  USES=python now also exports a PY_FLAVOR variable that contains the

Bump PORTREVISION for ports depending on the canonical version of GCC
(via Mk/bsd.default-versions.mk and lang/gcc) which has moved from
GCC 5.4 to GCC 6.4 under most circumstances.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c++11-lib, c++11-lang,
   c++14-lang, c++0x, c11, or gcc-c++11-lib.

PR:		219275

Bump PORTREVISIONs for ports depending on the canonical version of GCC and
lang/gcc which have moved from GCC 4.9.4 to GCC 5.4 (at least under some
circumstances such as versions of FreeBSD or platforms).

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using using Mk/bsd.octave.mk which in turn has USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c++11-lib, c++14-lang,
   c++11-lang, c++0x, c11, or gcc-c++11-lib.

PR:		216707

Switch ports to use USE_PYQT=<foo> instead of using RUN_- and BUILD_DEPENDS

pyqt.mk provides USE_PYQT=<list> to depend on its components. Convert the ports
not yet using it to it.

Reviewed by:	rakuco, mat
Approved by:	rakuco (mentor)
Differential Revision:	https://reviews.freebsd.org/D9261

Bump PORTREVISIONS for ports depending on the canonical version of GCC and
lang/gcc which have moved from GCC 4.8.5 to GCC 4.9.4 (at least under some
circumstances such as versions of FreeBSD or platforms), part II.

The first part covered  ports with USE_GCC=yes, USE_GCC=any, or one of
gcc-c++11-lib, openmp, nestedfct, c++11-lib as well as c++14-lang,
c++11-lang, c++0x, c11 requested via USES=compiler.

This adds ports with USES=fortran and ports using Mk/bsd.octave.mk
which in turn has USES=fortran.

PR:		214965
Reported by:	thierry

Update to 2.3.6.

PR:		209295
Submitted by:	tkato432 yahoo com
Sponsored by:	Absolight

Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.

With hat:	portmgr
Sponsored by:	Absolight

Fix runtime error.

PR:		203798
Submitted by:	tkato432 yahoo com
Sponsored by:	Absolight

Upgrade to 2.3.5.

Upgrade from 2.3.2 to 2.3.3. Define LICENSE.

Upgrade to 2.3.2.

- Convert games/ to new USES=python

Approved by:	portmgr (implicit)

- Use canonical @FreeBSD.org email

Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.

Part II, Bump PORTREVISIONs.

PR:		192025
Tested by:	antoine (-exp runs)
Approved by:	portmgr (implicit)

games/py-mnemosyne: update 2.3 -> 2.3.1 and reset maintainership

- Update to 2.3.1
- Reset maintainership (by maintainer request)
- Deleted patch (changes accepted by upstream)

PR:		191625
Submitted by:	<hhh@sdf.org>
Approved by:	marino (mentor)

games/py-mnemosyne: update to 2.3

- Update to 2.3
- Pass maintainership to submitter

PR:		188930
Submitted by:	hhh sdf org

Update the default version of GCC used in the Ports Collection from
GCC 4.6.4 to GCC 4.7.3.  This entails updating the lang/gcc port as
well as changing the default in Mk/bsd.default-versions.mk.

Part II, Bump PORTREVISIONs.

PR:		182136
Supported by:	Christoph Moench-Tegeder <cmt@burggraben.net> (fixing many ports)
Tested by:	bdrewery (two -exp runs)

- Bump PORTREVISION after KDE4_PREFIX change

games/py-mnemosyne: allow staging and switch from easy_install

- Update MAINTAINER: use canonical format for ports@FreeBSD.org

games/py-mnemosyne: update to 2.2.1

- Update to 2.2.1
- use python auto plist
- Drop maintainership

PR:		ports/183707
Submitted by:	Marek <marekrud gmail.com> (maintainer)

Update to libmpc version 1.0.1 which brings the following fixes:

 - Switched to automake 1.11.6, see CVE-2012-3386.
 - #14669: Fixed extraction of CC from gmp.h.
 - Fixed case of intermediate zero real or imaginary part in mpc_fma,
   found by hydra with GMP_CHECK_RANDOMIZE=1346362345.

This is on top of the following changes from version 1.0

 - Licence change towards LGPLv3+ for the code and GFDLv1.3+ (with no
   invariant sections) for the documentation.
 - 100% of all lines are covered by tests
 - Renamed functions
   . mpc_mul_2exp to mpc_mul_2ui
   . mpc_div_2exp to mpc_div_2ui

- Remove manual creation and removal of share/applications, as it's now in the
mtree (games category)

Approved by:	portmgr (bdrewery)

Add NO_STAGE all over the place in preparation for the staging support (cat:
games)

Bump PORTREVISON after devel/py-sip and devel/qscintilla2 update.

x11-toolkits/py-qt:
- mark BROKEN: does not build with latest devel/py-sip

- update to 2.2a

PR:		175058
Submitted by:	Marek Rudnicki <marekrud@gmail.com> (maintainer)

- pass maintainership to new volunteer

Requested by:	Marek Rudnicki <marekrud@gmail.com> (via ports@)
-This line, and those below, will be ignored--
> Description of fields to fill in above:                     76 columns --|
> PR:            If a GNATS PR is affected by the change.
> Submitted by:  If someone else sent in the change.
> Reviewed by:   If someone else reviewed your modification.
> Approved by:   If you needed approval for this commit.
> Obtained from: If the change is from a third party.
> MFC after:     N [day[s]|week[s]|month[s]].  Request a reminder email.
> Security:      Vulnerability reference (one per line) or description.
> Empty fields above will be automatically removed.

M    py-mnemosyne/Makefile

- update png to 1.5.10

Chase PyQT update

- Move over to py25 or above
- While here get rid FreeBSD 6.X and md5 support

Update to 1.2.2

PR:             ports/150670
Submitted by:   KATO Tsuguru <tkato432 at yahoo.com>

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

- update to jpeg-8

The KDE FreeBSD team is proud to announce the release of SIP-4.10 and
PyQt-4.7 for FreeBSD. The official update notes can be found at
http://www.riverbankcomputing.com

We'd like to say thanks to all helpers, testers and submitters.

- Update to 1.2.1

PR:             138454
Submitted by:   Ports Fury

Reset beech@FreeBSD.org while he works on restoring his email situation.

Hat:            portmgr

- Switch SourceForge ports to the new File Release System: categories starting
with G

- Patch setup.py to not install files during build
- Unbreak

Reported by:    pointyhat via pav
Approved by:    portmgr (erwin)

- Mark BROKEN: installs file under PREFIX during build phase
  (mnemosyne.desktop, pixmaps/mnemosyne.png)

Reported by:    pointyhat
Approved by:    portmgr (self)

- Update to 1.1.1

Submitted by:   Timothy Bourke <timbob@bigpond.com>

Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)

- Update to 1.0.1.1

- Update to 1.0.1

Changes:
-Make grade 0 the keyboard default for cards with previous grades 0 or 1.
-Add support for html style escaped unicode in txt import, to allow import
 of Supermemo databases containing unicode.
-Support import of Supermemo for Palm databases that were converted to XML.
-Make import of tab delimited files more robust.
-Added new option in config.py (backups_to_keep) to be able to change the
 number of daily backups to keep. Set to -1 for no limit.
-Added new option in config.py (day_starts_at) to be able to change the
 moment a new day starts.
-On Windows, log errors to a file in the user's directory, as opposed to a
 file in a system directory.
-Visually distinguish grades 0 and 1 from other grades.
-Czech translation (cs).
-Chinese translation (zh_CN, zh_HK, zh_SG, zh_TW).
-French translation (fr).

- Add needed dependencies [1]
- Tweak Makefile and pkg-plist

Reported by:    sat[1]

- Fix pkg-plist

Reported by:    pointyhat via pav
Approved by:    linimon (mentor)

- Fix install path

Reported by:    pointyhat via droso
Approved by:    linimon (mentor)

- New port py-mnemosyne-1.0

- Mnemosyne resembles a traditional flash-card program but with an important
twist: it uses a sophisticated algorithm to schedule the best time for
a card to come up for review.

Submitted by:   Beech Rintoul <beech@FreeBSD.org> (maintainer)
Approved by:    linimon (mentor)