games/tanglet: Update to 1.6.8

https://github.com/gottcode/tanglet/releases/tag/v1.6.8

games/tanglet: Fix configure

Reported by:	pkg-fallout

games/tanglet: Update to 1.6.7

https://github.com/gottcode/tanglet/releases/tag/v1.6.7

games/tanglet: Update to 1.6.6

https://github.com/gottcode/tanglet/releases/tag/v1.6.6

games/tanglet: Update to 1.6.5

https://github.com/gottcode/tanglet/releases/tag/v1.6.5

devel/qt6: bump dependent ports

games/tanglet: Update to 1.6.4

https://github.com/gottcode/tanglet/releases/tag/v1.6.4

games/tanglet: Update to 1.6.3

games/tanglet: Update to 1.6.2

Switch to Qt6 and CMake build as Qt5 support was dropped upstream.

Mk/Uses: always use colon for build/run suffix

Most USES use a colon for build/run(/test) suffixes. Change kde.mk,
qt.mk and pyqt.mk to do the same, and update all ports using that.

Document in CHANGES.

PR:			266034
Exp-run by:		antoine
Approved by:		tcberner (mentor)
Differential Revision:	https://reviews.freebsd.org/D36349

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

games: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  <benlutz@datacomm.ch>
  *  <janos.mohacsi@bsd.hu>
  *  Aaron Baugher
  *  Aaron Dalton <aaron@FreeBSD.org>
  *  Aaron Dalton <aaron@daltons.ca>
  *  Aaron VonderHaar <avh4@usa.net>
  *  Aaron Zauner <az_mail@gmx.at>
  *  Adam Kranzel (adam@alameda.edu)
  *  Adam Weinberger <adamw@FreeBSD.org>
  *  Ade Lovett <ade@FreeBSD.org>
  *  Akinori MUSHA aka knu <knu@idaemons.org>

games/tanglet: Update to 1.6.1

graphics/mesa-libs: Bump reverse deps for libglvnd

Per discussion with bapt on helping pkg handle the changing of these
deps and avoiding impossible upgrade senarios.

PR:		246767
Reviewed by:	manu, bapt
Approved by:	x11
Differential Revision:	https://reviews.freebsd.org/D30824

games/tanglet: Update to 1.6.0

Remove # $FreeBSD$ from Makefiles.

Update games/tanglet to 1.5.6

games/tanglet: prepare for Qt5-5.14

- update to 1.5.5 which already supports it

PR:		244964

Add LOCALBASE/share/man to the valid path for manpages

Also compress manpages in this location.

As a followup of a discussion which occured in 2017:
https://lists.freebsd.org/pipermail/freebsd-arch/2017-March/018115.html
And following:
https://svnweb.freebsd.org/base?view=revision&revision=315053
and
https://svnweb.freebsd.org/base?view=revision&revision=315142

All the supported FreeBSD version now supports share/man in manpath for
LOCALBASE As a result the ports tree can now accept it for manpage, but
more over migrate to this new path. Resulting in more consistency now the
manpages in base and ports would be in the relative path (under share/)
and a reduced amount of patching needed to port something to FreeBSD

Note1: this has already be done for GNU info pages earlier
Note2: due to the fact that for end user no functionnality will change during
the migration of the manpages to the new location and to avoid massive rebuild
of packages, it has been decided to not bump portrevision when migrating.

Reviewed by:	mat (portmgr)
Differential Revision:	https://reviews.freebsd.org/D23166

Update games/tanglet to 1.5.4

Add USES=xorg USES=gl, ports categories g

Add USES=xorg and USES=gl to ports in categories starting with 'g'.
While here, try to sprinkle other USES (mostly gnome and sdl) as needed.

Bump PORTREVISION for ports depending on the canonical version of GCC
as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3
to GCC 9.1 under most circumstances now after revision 507371.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.

PR:		238330

Fix Qt5 symbol version scripts to put the catch-all clause first.  When
a symbol matches multiple clauses the last one takes precedence.  If the
catch-all is last it captures everything.  In the case of Qt5 libraries
this caused all symbols to have a Qt_5 label while some should have
Qt_5_PRIVATE_API.  This only affects lld because GNU ld always gives the
catch-all lowest priority.

Older versions of Qt5Webengine exported some memory allocation symbols from
the bundled Chromium.  Version 5.9 stopped exporting these [1] but the
symbols were kept as weak wrappers for the standard allocation functions to
maintain binary compatibility. [2][3]  The problem is that the call to the
standard function in these weak wrappers is only resolved to the standard
function if there's a call to this standard function in other parts of
Qt5Webengine, because only then is there a non-weak symbol that takes
precedence over the weak one.  If there's no such non-weak symbol the call

- Update WWW

Approved by:	portmgr blanket

Bump PORTREVISION for ports depending on the canonical version of GCC
defined via Mk/bsd.default-versions.mk which has moved from GCC 7.4 t
GCC 8.2 under most circumstances.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, as a double check, everything INDEX-11 showed depending on lang/gcc7.

PR:		231590

Change x11/xorgproto to become a build dep

Change x11/xorgproto to become a build time dependency when added to
USE_XORG.  Change the dependency to be on the port, rather than a file the
port installs.
Fix fallout.
Bump portrevision on depending ports.

PR:		230909
Reviewed by:	eadler
Approved by:	portmgr (antoine)
Obtained
from:	https://github.com/FreeBSDDesktop/freebsd-ports/tree/feature/xorgproto
exp-run:	antoine
Differential Revision:	https://reviews.freebsd.org/D16906

Fix a common grammar error: "can not" means the opposite of "cannot."

"Can not" means "it is possible not to," and "cannot" means "it is impossible
to."

Bump PORTREVISION for ports depending on the canonical version of GCC
in the ports tree (via Mk/bsd.default-versions.mk and lang/gcc) which
has now moved from GCC 6 to GCC 7 by default.

This includes ports
 - featuring USE_GCC=yes or USE_GCC=any,
 - featuring USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and those
 - with USES=compiler specifying one of openmp, nestedfct, c11, c++0x,
   c++11-lib, c++11-lang, c++14-lang, c++17-lang, or gcc-c++11-lib.

PR:		222542

Update to 1.5.3

Replace bsd.qt.mk by Uses/qt.mk and Uses/qt-dist.mk

From now on, ports that depend on Qt4 will have to set
	USES=		qt:4
	USE_QT=		foo bar
ports depending on Qt5 will use
	USES=		qt:5
	USE_QT=		foo bar

PR:		229225
Exp-run by:	antoine
Reviewed by:	mat
Approved by:	portmgr (antoine)
Differential Revision:	-https://reviews.freebsd.org/D15540

Adopt-a-port

Update to 1.5.1
Add LICENSE_FILE
Move USES upward
Fix stage-qa warning about missing USE_GL
Remove workaround for GCC < 6 meant to fix build on FreeBSD 9.x
Add options for DOCS and NLS

Backport and adapt patch to fix `make install' with Qt 5.9:

    /usr/local/lib/qt5/bin/qmake -install qinstall
/wrkdirs/usr/ports/games/tanglet/work/tanglet-1.4.0/translations/*.qm
/wrkdirs/usr/ports/games/tanglet/work/stage/usr/local/share/tanglet/translations/*.qm
    Error: usage: [-exe] source target
    *** Error code 3 (ignored)

PR:		224849

Bump PORTREVISION for ports depending on the canonical version of GCC
(via Mk/bsd.default-versions.mk and lang/gcc) which has moved from
GCC 5.4 to GCC 6.4 under most circumstances.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c++11-lib, c++11-lang,
   c++14-lang, c++0x, c11, or gcc-c++11-lib.

PR:		219275

Bump PORTREVISIONs for ports depending on the canonical version of GCC and
lang/gcc which have moved from GCC 4.9.4 to GCC 5.4 (at least under some
circumstances such as versions of FreeBSD or platforms).

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using using Mk/bsd.octave.mk which in turn has USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c++11-lib, c++14-lang,
   c++11-lang, c++0x, c11, or gcc-c++11-lib.

PR:		216707

Assume "pkg-config zlib" works after 9.x reached EOL

games/tanglet: update to 1.4.0

- Expose std::lround on 9.x
- Don't pull Gtk dependencies just for icon cache (see r390886)

Changes:	https://gottcode.org/tanglet/#releasenotes

Convert LICENSE= "GPLxx # or later" to "GPLxx+"

Approved by:	portmgr blanket

games/tanglet: update 1.2.2 -> 1.3.1

PR:		197435
Submitted by:	Kato Tsuguru <tkato432@yahoo.com>

- Release ports maintained by games@

games@ team is quite small and inactive, so ports currently assigned
to it cannot be assumed as properly maintained. To not cause confusion
by making it look otherwise, and also to allow and promote adoption
by individual maintainers, release these ports back to the pool. Note
that this does not change the fact that games@ team still takes care
of these ports to excent of its capabilities.

Suggested by:	marino

- Clarify LICENSE
- Add LICENSE_FILE
- Drop @dirrm* from plist

games/bombherman

- Change Makefile header, use my name and @FreeBSD.org email
- Transfer maintainership to games@ team

games/connectagram

- Change Makefile header, use my name and @FreeBSD.org email
- Transfer maintainership to games@ team
- Break lines around 80 characters

games/cretan-hubris

- Change Makefile header, use my name and @FreeBSD.org email
- Transfer maintainership to games@ team

- Remove USES desktop-file-utils
- Add NLS Option and REINPLACE
- Add OPTIONS_SUB
- Strip executable
- Recreate pkg-plist with make makeplist

- Add DOCS Option
 Support STAGEDIR

Approved by:	pawel / wg (mentors, implicit)

- Convert to USES=qmake
- Adjust USE_QT4 components

Approved by:	portmgr (blanket approval)

- Remove manual creation and removal of share/applications, as it's now in the
mtree (games category)

Approved by:	portmgr (bdrewery)

Explicitly define LDFLAGS for 4 QT4-based ports

Fixes come from dports.  Problem and solution verified on
FreeBSD using gcc48.

Approved by:	portmgr (bapt, implicit)

Add NO_STAGE all over the place in preparation for the staging support (cat:
games)

- Update to 1.2.2
- Shorten header
- Change maintainer email gmx.ch --> FreeBSD.org
- USES desktop-file-utils
- Trim USE_QT4
- Trim docs
- Add REINPLACE_CMD to remove not existent pkgconfig zlib
- Trim pkg-plist

Approved by:	wg (mentor)

- Remove MAKE_JOBS_SAFE variable

Approved by:	portmgr (bdrewery)

- Clean up Makefile
- Respect PREFIX
- Don't use PORTDATA macro since the data is required
- Use the build system provided by the software

PR:		ports/171364
Submitted by:	nemysis <nemysis at gmx dot ch> (maintainer)
Approved by:	makc (mentor)

- port requires data
- remove INSTALL file from PORTDOCS
- adopt optionsNG for DOCS

PR:     170745
Submitted by:   maintainer, nemysis@gmx.ch

- Convert USE_QT_VER=4 and QT_COMPONETS to USE_QT4

Review by:      bapt, David Naylor (kde team)

Tanglet is a single player word finding game based on Boggle. The
object of the game is to list as many words as you can before the
time runs out. There are several timer modes that determine how
much time you start with, and if you get extra time when you find
a word.

You can join letters horizontally, vertically, or diagonally in any
direction to make a word, so as long as the letters are next to
each other on the board. However, you can not reuse the same letter
cells in a single word. Also, each word must be at least three
letters on a normal board, and four letters on a large board.

WWW: http://gottcode.org/tanglet/

PR:             167239
Submitted by:   nemysis <nemysis@gmx.ch>