graphics/camera: Remove expired port:

2023-05-08 graphics/camera: abandoned upstream, does not fetch, website
disappeared, unmaintained

audio/opus: bump consumers after update to 1.4

graphics/camera: mark BROKEN (does not fetch), deprecate

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

graphics: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  "Waitman Gobble" <uzimac@da3m0n8t3r.com>
  *  Aaron Dalton <aaron@FreeBSD.org>
  *  Abel Chow <ozsanh45vds001@sneakemail.com>
  *  Adam Weinberger <adamw@FreeBSD.org>
  *  Ade Lovett <ade@FreeBSD.org>
  *  Ade Lovett <ade@lovett.com>
  *  Akinori MUSHA aka knu <knu@idaemons.org>
  *  Aldis Berjoza <aldis@bsdroot.lv>
  *  Alex Hayward <xelah@xelah.com>
  *  Alex Ivasyuv <siegerstein@pochta.ru>
  *  Alex Samorukov <samm@os2.kiev.ua>

Remove # $FreeBSD$ from Makefiles.

Update a few GNUstep ports:

 * devel/gnustep-make: Update to 2.8.0
 * lang/gnustep-base: Update to 1.27.0
 * x11-toolkits/gnustep-back: update to 0.28.0
 * x11-toolkits/gnustep-gui: update to 0.28.0

Also bump PORTREVISION on dependent ports.

graphics/libgphoto2: Update to 2.5.22, graphics/gphoto2: Update to 2.5.20

* Bump PORTREVISION of ports depending on them.

Also while I'm here:
* Add "gnome" to USES if the XML option is enabled to avoid warnings about
  using USE_GNOME alone.
* Pet portlint

Notable changes since 2.5.16 (graphics/libgphoto2) [1]:

* Added new USB Ids for various camera types
* Updated translations
* Report file changes via GP_EVENT_FILE_CHANGED (hooked up for Canon EOS
  currently)

Move Objective-C ports to the v2 GNUstep ABI.

 * Bump the LLVM revision used for GNUstep to 7, the minimum to support
   the new ABI.
 * GNUstep-back does not work with lld, so mark it to use Gold (BFD LD
   doesn't seem able to link Objective-C things).
 * Turn off some annoying debug logs in GNUstep back, which generate
   several messages per second when you move the mouse.  These should
   never have been enabled in a release build anyway.
 * Downgrade Cenon to 4.0.2.  This was the last version to actually work
   with GNUstep (the later ones use XCode >= 5 .xib files, which GNUstep
   can't parse).
 * Update gorm to git head. The current release doesn't work with the
   new Objective-C ABI, but -head has the patches to fix it.
 * Update PikoPixel and add it to the gnustep-app meta-package.
 * Update the three core GNUstep packages to the latest release.
 * Update gnumail and pantomime to the latest release and fix a linking
   error with the new ABI.
 * Update GNUstep FTP to the latest version.

Reviewed by:	bapt (previous version)

Update Objective-C LLVM version to 6.0.

Fixes aarch64 build.  Reduces depends on obsolete LLVM 4.0.

PR:		230116
Submitted by:	mikael.urankar@gmail.com
Approved by:	theraven (prior version)
Sponsored by:	DARPA, AFRL

graphics/libgphoto2: Update to 2.5.16
graphics/gphoto2: Update to 2.5.15
graphics/py-gphoto2: Update to 1.8.2

Also bump PORTREVISION of ports depending on these.

PR:		224611
Submitted by:	bsam (graphics/libgphoto2)

Fix configure options for gnustep-make

We were not setting the flag to select the GNUstep ABI, so were defaulting to
using the GCC-compatible version, which was likely to trigger a lot of subtle
bugs.  This was noticed when C++ exceptions thrown through Objective-C stack
frames caused segfaults.

graphics/gphoto2: Update to 2.5.14
graphics/libgphoto2: Update to 2.5.14
graphics/py-gphoto2: Update to 1.7.0

- Bump dependent ports
- Take maintainership of graphics/gtkam

graphics/libgphoto2: Update to 2.5.13
graphics/py-gphoto2: Update to 1.6.0

- Bump dependent ports

Changes this release:
  https://github.com/gphoto/libgphoto2/releases/tag/libgphoto2-2_5_13-release

Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.

With hat:	portmgr
Sponsored by:	Absolight

Convert LICENSE= "GPLxx # or later" to "GPLxx+"

Approved by:	portmgr blanket

Make all GNUstep ports install into the System domain so that the Local domain
is available for stuff built from source.

Some ports were already installing in the System domain, for these just remove
the Makefile lines explicitly specifying the install domain.

The rest are installed in the Local domain, remove any overrides, update their
pkg-plists and any explicit paths in the Makefiles and then bump port revision.

Approved by:	bapt (mentor)
Differential Revision:	https://reviews.freebsd.org/D2977

Convert bsd.gnustep.mk to USES=gnustep

Simplify gnustep ports
Hook into the regular ports framework:
- LIB_DEPENDS for library dependencies
- Use regular USE_LDCONFIG

Reuse USES=objc (automatic)
USE_GNUSTEP is now a macro to set the dependencies and build feature needed.
Accepted arguments: back base build gui

Merge deskutils/preferencepanes into deskutils/systempreferences

Remove dead GNUSTEP_CH master sites

- Simplify MASTER_SITES
- Clarify LICENSE
- Add LICENSE_FILE
- Fix whitespace
- Strip binary

bump PORTREVISION due libphoto2 shared library version changed.

Submitted by:	tijl@

Cleanup plist

Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.

Part II, Bump PORTREVISIONs.

PR:		192025
Tested by:	antoine (-exp runs)
Approved by:	portmgr (implicit)

Bump PORTREVISION on more ports that depend on libgcrypt after the update
in r363436 and remove the UPDATING entry because it did not guarantee
that all ports were updated nor that they were updated in the right order.
Also remove libgcrypt.la again.

PR:		192342
Approved by:	portmgr (implicit, bump unstaged ports)

Convert some more USE_BZIP2 to USES=tar:bzip2

Approved by:	portmgr (not really, but touches unstaged ports)

Stage support

Add NO_STAGE all over the place in preparation for the staging support (cat:
graphics)

- reset MAINTAINER

- update MASTER_SITES

- drop MD5

LICENSE GPLv2

- drop USE_GNUSTEP_PREFIX

- add LICENSE:

Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)

- take maintainership
Approved by:    maintainer

3

Change maintainers e-mail address.

Requested over:         IRC

- update for gnustep-make-2.0.0
Approved by:    gurkan (maintainer)

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

- add category gnustep
PR:             103931
Approved by:    pav

- update to use new bsd.gnustep.mk
Approved by:    gurkan@linuks.mine.nu

Update master site.

Approved by:    tarzeau@linuks.mine.nu (maintainer)

cleanup pkg-plist after gnustep-make

- fix dependecy on libgphoto2

Camera downloads files from your digital camera. It is based on GNUstep.
PR:             103134
Submitted by:   Gürkan Sengün