Developer's Image Library (DevIL) is a programmer's library to develop
applications with very powerful image loading capabilities, yet is easy for
a developer to learn and use. Ultimate control of images is left to the
developer, so unnecessary conversions, etc. are not performed. DevIL utilizes
a simple, yet powerful, syntax. DevIL can load, save, convert, manipulate,
filter and display a wide variety of image formats.
Currently, DevIL can load and save many different image formats.
DevIL currently supports the following APIs for display:
OpenGL, Windows GDI, SDL, DirectX and Allegro.
Compilers that can compile DevIL or use it include Djgpp, MSVC++, gcc,
Delphi, Visual Basic, Power Basic and Dev-C++.
Many people may have known DevIL as OpenIL, but the name was changed due to
SGI's request.
===> The following configuration options are available for devil-1.8.0_8,1:
DOCS=on: Build and/or install documentation
EXAMPLES=on: Build and/or install examples
JASPER=on: JPEG 2000 support via JasPer
JPEG=on: JPEG image format support
LCMS2=on: Little CMS 2.x support
LIBMNG=on: MNG animated images support via libmng
PNG=on: PNG image format support
SQUISH=on: Enable DXT compression via libsquish
TIFF=on: TIFF image format support
===> Use 'make config' to modify these settings
*/*: Fix build with llvm16 on 13.2-STABLE
As like as HEAD(14.0-RELEASE) llvm16 was merged in base for 13.2-STABLE
with the OSVERSION 1302507.
- Utilize USE_CXXSTD=c++14 or similar solution where applicable
- Update conditionals to addtionally check for OSVERSION greater than
1302507 and less than 1400000
Approved by: portmgr (blanket)
Sponsored by: The FreeBSD Foundation
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner)
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
*: bump PORTREVISION after math/Imath update, #2
This also bumps the PORTREVISION of all ports that
OPTIONally depend on Imath, for instance, through an OPENEXR
or EXR option that defaults to off.
Missed in commit 3cda93bdf69bfb4ea99181e638e661c467dad38d.
Reported by: Philipp Ost <pj@smo.de>
Reported by: koobs@ (thanks for forwarding the report)
graphics/mesa-libs: Bump reverse deps for libglvnd
Per discussion with bapt on helping pkg handle the changing of these
deps and avoiding impossible upgrade senarios.
PR: 246767
Reviewed by: manu, bapt
Approved by: x11
Differential Revision: https://reviews.freebsd.org/D30824
Update jasper to 2.0.16
This is needed to be able to update gegl to latest version.
Bump revision of all consumer as the ABI is not 100% backward compatible.
Provide a patch for graphics/devil to properly build with latest jasper.
While here add a missing USES=xorg to graphics/devil
Update ilmbase and openexr to 2.3.0, rename OpenEXR to openexr.
Release notes: <https://github.com/openexr/openexr/releases/tag/v2.3.0>
Adjust LIB_DEPENDS of all ports that require ilmbase or openexr to chase
the new lower-case spelling of the name, and to omit the version from the
library name to ease future maintenance.
Bump PORTREVISION of all ports that depend on ilmbase or openexr directly,
so that they all get rebuilt on upgrades.
Add patches to graphics/ampasCTL to keep it alive, with (a) ilmbase now
that its Iex::BaseExc class is no longer derived from std::string,
details were given upstream through https://github.com/ampas/CTL/issues/71
and (b) to unwind semicolon/;-lists in cmake that stem from openexr/
ilmbase pkg-config variables.
(Note ampasCTL is unmaintained as FreeBSD port, and upstream,
and I cannot run-time test it.)
Poudriere build tests on 11.2-RELEASE-p1 amd64 of ALL ports depending
directly or indirectly on ilmbase and/or openexr have passed without
regressions. Thus invoking due diligence, I believe I have done the
equivalent of an -exp run, and do not require approval for the dependency
chases to third-party ports.
Revision bump of all ports with USE_GL after consolidation of mesa-libs
Approved by: swills (mentor)
Differential Revision: https://reviews.freebsd.org/D10845
Make buildable with clang. While here, add patches submitted upstream
by others. Also make use of the author's own self-test suit.
PR: 196161
Approved by: maintainer timeout
Replace USES=libtool:oldver with USES=libtool or USES=libtool:keepla in
the 32 ports that still use it. Bump PORTREVISION on their dependent
ports except the ones that depend on these:
audio/libogg
audio/libvorbis
devel/pcre
ftp/curl
graphics/jpeg
graphics/libart_lgpl
graphics/tiff
textproc/expat2
textproc/libxslt
In these cases the same trick as in the recent gettext update is used.
(Only the first 15 lines of the commit message are shown above )
Add USES=alias to several ports
Alias is a new USES tool that allows DragonFly to masquerade as FreeBSD
by setting CFLAGS+= -D__FreeBSD__. For some ports, this fixes the build
without the need for additional patches.
Approved by: portmgr (bapt, blanket)
Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.
Part II, Bump PORTREVISIONs.
PR: 192025
Tested by: antoine (-exp runs)
Approved by: portmgr (implicit)
Upgrade OpenEXR and ilmbase to 2.2.0.
GCC 4.2 in FreeBSD 8.X/9.X base is now too old to compile OpenEXR, so
GCC-based systems will upgrade to the default ports compiler (GCC 4.7
currently.)
Add two patches to OpenEXR to permit building it in a live system with
the older OpenEXR version installed. Bug report filed to upstream Github
at https://github.com/openexr/openexr/issues/130
Couple OpenEXR more tightly to ilmbase and require its exact .so
version.
Add UPDATING note, and bump PORTREVISION of all dependent ports.
Proto-STAGE hugin-devel, and mark it IGNORE because hugin is newer.
Approved by: portmgr (implicit for bumping PORTREVISION on unstaged ports)
Remove two libtool fixes from Mk/Uses/libtool.mk. They don't always work
when an older version of a package is installed. This is the case when an
executable links with installed libraries and with uninstalled libraries
that link with other uninstalled libraries. For each of the directly
linked libraries the executable will have an rpath (/usr/local/lib for the
installed libraries and a path under WRKDIR for each of the uninstalled
libraries), but not for the indirect libraries. Both ld(1) and rtld(1)
search the rpath of the executable first before any rpath of libraries, so
the indirectly linked libraries will be found in /usr/local/lib if they are
installed instead of in WRKDIR.
With this commit executables will overlink with uninstalled indirect
libraries again so their location is added to the rpath of the executable.
This partially reverts r358784.
PR: 191611
Approved by: portmgr (bapt)
Add 4 new sed commands to USES=libtool. The first two apply some of the
changes that Debian made to their libtool. The first command applies to
libtool versions 1.4 and up. The second command is somewhat more elaborate
but essentially it uses the sed hold space to move an "elif...fi" block
down. It applies to 2.x. Together these reduce overlinking to unpatched
.la files (from ports that don't have USES=libtool yet but also .la files
in the work directory).
The third and fourth command fix relinking. During staging libtool may
relink libA when it links to another library in the work directory libB.
The reason is that libA created during build phase has its runpath set to
the location of libB in the work directory. This allows running an
executable that links to libA from within the work directory. The relink
removes this extra runpath.
(Only the first 15 lines of the commit message are shown above )
Remove indefinite articles and trailing periods from COMMENT, plus
minor COMMENT typos and surrounding whitespace fixes. Categories G-I.
CR: D201
Approved by: portmgr (bapt)
- After recent graphics/devil soversion bump its PORTREVISION was not bumped, so
bump it properly now and also bump all dependent ports again
Submitted by: tijl
- Switch graphics/devil to USES=libtool
Since this changes shared lib version number, bump PORTREVISION on all dependent
ports:
- devel/love
- devel/love07
- devel/love5
- games/arx-libertatis
- games/pink-pony
- games/spring
- graphics/cegui
- graphics/graphviz
While here, fix graphics/cegui plist to not remove mtree directory.
Convert all :U to :tu and :L to :tl
Since FreeBSD 8.4 and FreeBSD 9.1 make(1) do support :tu and :tl as a
replacement for :U and :L (which has been marked as deprecated)
bmake which is the default on FreeBSD 10+ only support by default
:tu/:tl a hack has been added at the time to support :U and :L to ease
migration. This hack is now not necessary anymore
Note that this makes the ports tree incompatible with make(1) from
FreeBSD 8.3 or earlier
With hat: portmgr
The FreeBSD x11@ and graphics team proudly presents
a zeising, kwm production, with help from dumbbell, bdrewery:
NEW XORG ON FREEBSD 9-STABLE AND 10-STABLE
This update switches over to use the new xorg stack by default on FreeBSD 9
and 10 stable, on osversions where vt(9) is available.
It is still possible to use the old stack by specifying WITHOUT_NEW_XORG in
/etc/make.conf .
FreeBSD 8-STABLE and released versions of FreeBSD still use
the old version.
A package repository with binary packages for new xorg will
be available soon.
This patch also contains updates of libxcb and related ports, pixman, as well
(Only the first 15 lines of the commit message are shown above )
- Support staging
- Use new OPTIONS features
- Use new LIB_DEPENDS syntax
- Fix NVTT option
- Add missing SQUISH option
- Enable all options by default as upstream does
- Trim Makefile headers
- Drop ABI versions from LIB_DEPENDS
- OptionsNG
- Pet portlint
- Switch to dynamic plist where useful
- Canonicalize patch names
- Fix DOS line endings in patch files
Force numerous ports that fail to build with clang over to instead always
rely on gcc. The patch uses the new USE_GCC=any code in Mk/bsd.gcc.mk to
accomplish this.
The ports chosen were ports that blocked 2 or more ports from building with
clang. (There are several hundred other ports that still fail to build with
clang, even with this patch. This is merely one step along the way.)
Those interested in fixing these ports with clang, and have clang as their
default compiler, can simply set FORCE_BASE_CC_FOR_TESTING=yes.
For those who have gcc as their default compiler, this change is believed
to cause no change.
Hat: portmgr
Tested with: multiple runs on amd64-8-exp-bcm and 9-exp-clang, with various
combinations of patch/no-patch and flag settings.
Switch from libglut to freeglut and retire libglut. Libglut hasn't been
developed in years and has been dropped from the MESA 8.0 distribution.
Freeglut is a rewrite of glut and is actively developed and is used by
many linux distributions instead of libglut.
Bump all ports that directly depend on libglut because of the shlib version
change.
There are some extra items in this patch.
*) Because freeglut doesn't have the same dependancies as libglut, some ports
need extra dependencies added to USE_XORG to make them build.
*) Mark graphics/f90gl broken, f90gl depends on a header that is only shipped
with libglut.
*) Remove option for libglut/freeglut selection in games/cake, only freeglut
remains now.
*) While here fix a png related build issue games/vegastrike.
Thanks to miwi for running the exp-run.
Approved by: portmgr (miwi)
Collaboration with: zeising@
Obtained from: xorg-dev staging area.
- Update devel/sdl12 to 1.2.15
- Update audio/sdl_mixer to 1.2.15
- Update graphics/sdl_image to 1.2.12
- Update graphics/sdl_ttf to 2.0.11
- Update graphics/sdl_gfx to 2.0.23
- Update net/sdl_net to 1.2.8
- Bump PORTREVISIONs on ports that depend on one or more packages due to
ABI and shared library version changes
- Update Mk/bsd.sdl.mk accordingly for the new shared library versions
Tested by: exp-run by pav
- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead
PR: 157936
Submitted by: myself
Exp-runs by: pav
Approved by: pav
-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.
It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.
With help: marcus and kwm
Pointyhat-exp: a few times by pav
Tested by: pgollucci, "Romain Tartière" <romain@blogreen.org>, and
a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by: marcus
Approved by: portmgr
- Disable allegro in case it's found (causes problems on some libraries like
"x11-toolkits/gigi", also in that case a dependency is missing).
PR: ports/115111
Submitted by: alepulver (myself)
Approved by: miwi (maintainer)
- Add USE_GL (since the last xorg update it has been built without OpenGL,
thus ports like "x11-toolkits/gigi" can't find some functions they need).
- Remove unneeded SDL hacks.
- Bump PORTREVISION.
Approved by: miwi (maintainer)
- Update devel/sdl12 to version 1.2.11. Now we employ stock SDL directory
structure (i.e. include/SDL for includes and sdl-config for configuration
binary)
- Update graphics/sdl_ttf to version 2.0.8
- Update graphics/sdl_image to version 1.2.5
- Update audio/sdl_mixer to version 1.2.7
- Update net/sdl_net to version 1.2.6
- Update Mk/bsd.sdl.mk accordingly
- Fix dependent ports to fit the new directory structure and avoid several
API breakages
- Bump up portrevisions for all dependent ports to allow them to be upgraded
by portupgrade/portmaster etc tools
Approved by: kris (portmgr), sem (mentor)
