Remove non staged ports without pending PR from g*

Convert a bunch of EXTRACT_SUFX=... into USES=tar:...

Approved by:	portmgr (not really, but touches unstaged ports)

Rename all patches that contain '::' as a path separator, and use
'__' instead.

Reset the 99 ports still listed under sylvio@

Sylvio's last commit was 17 months ago, a full 5 months after all of his
ports could have been reset per policy.  Given the push to complete
staging (48 ports are still unstaged, something like 70+ have already
been staged by other committers) and given that PRs are automatically
assigned but never addressed, it's better just to reset all the ports and
PRs so that it's clear to others that these ports are free to maintain.

Approved by:	portmgr (implicit)

Convert all :U to :tu and :L to :tl

Since FreeBSD 8.4 and FreeBSD 9.1 make(1) do support :tu and :tl as a
replacement for :U and :L (which has been marked as deprecated)

bmake which is the default on FreeBSD 10+ only support by default
:tu/:tl a hack has been added at the time to support :U and :L to ease
migration. This hack is now not necessary anymore

Note that this makes the ports tree incompatible with make(1) from
FreeBSD 8.3 or earlier

With hat:	portmgr

Add NO_STAGE all over the place in preparation for the staging support (cat:
graphics)

- Fix parallel (-jX) builds by defining MAKE variable correctly
- Modernize LIB_DEPENDS syntax, remove implicit GNU_CONFIGURE
- Reformat port description text while I am here, fix WWW line

NB: there is version 1.2.11 available

Approved by:	miwi, bapt (portmgr, implicit)

Mark jobs unsafe

New USES imake to handle the dependency on imake.

This uses accept 'env' as an argument for ports that do use their own or a
different do-configure target.

Modify xmkmf so it accept IMAKECPPFLAGS as default flags for imake and pass it
to the called imake.
Modify xorg-cf-files (the FreeBSD.cf configuration file) to allow CppCmd to be
overwritten.
Pass CppCmd CcCmd and CplusplusCmd via command line to each call of imake via
IMAKECPPFLAGS
Pass IMAKE_DEFINE with the above arguments to MAKE_ARGS so that imake spawned
from Makefile generated by a previous
imake also inherit the defined CppCmd CcCmd and CplusplusCmd.
Make imake use devel/tradcpp all the time, so that when buidling with clang we
do not depend on gcc's cpp.
Make imake respect CC and CXX
Make imake respect USE_GCC (if set imake will use gcc's cpp).

While here:
- Remove a couple of indefinite articles from comments
- Trim headers
- Fix a couple of ports to build with clang or use: USE_GCC=any
- Fix a now useless redefinition of the extraction chain
- Fix a typo in japanese/Wnn7-lib bundled imake template definitions
- Fix some XMKMF execution with no env specified
- Use options helper in x11/xautolock to simplify the port

- Ports Tree does not support < 7x, so this check is unnecessary.

PR:             ports/168274
Submitted by:   crees@

Remove more tags from pkg-descr files fo the form:

- Name
em@i.l

or variations thereof. While I'm here also fix some whitespace and other
formatting errors, including moving WWW: to the last line in the file.

- Remove MD5 checksum

Sync to new bsd.autotools.mk

Punt autoconf267->autoconf268

Autotools update.   Read ports/UPDATING 20100915 for details.

Approved by:    portmgr (for Mk/bsd.port.mk part)
Tested by:      Multiple -exp runs

- Update to 1.2.9

- Update to 1.2.8
- Unbreak to 64bits

Approved by:    miwi (mentor)

- update to jpeg-8

- Update my mail address to FreeBSD

Approved by:    miwi (mentor)

Also broken on sparc64.

- bump all port that indirectly depends on libjpeg and have not yet been bumped
or updated
Requested by:   edwin

- Fixed build on 6.X.

PR:             ports/136134
Submitted by:   Sylvio Cesar <scjamorim@bsd.com.br> (maintainer)

- Broken on amd64.
- Pass maintainership to latest submitter.

Reported by:    itetcu, pav

- Mark as unbroken.
- Fix plist.

PR:             ports/135599
Submitted by:   Sylvio Cesar <scjamorim@bsd.com.br>

- Update X.org ports to 7.4+ (few ports are more recent than the katamari).
- Bump PORTREVISION for all ports depending on libglut since the shlib
version number went from 4 to 3.
- Bump PORTREVISION for all ports depending on libXaw as libXaw.so.8 isn't
installed anymore.
- Couple of ports fixes (mostly missing xorg components added to USE_XORG).

- Fix mistake from my previous commit (cannot include pre.mk twice)

Pointy hat to:  pav
Reported by:    pointyhat

- Remove conditional checks for FreeBSD 5.x and older

Conversion from (now defunct) autoconf-2.61 to autoconf-2.62

Tested by:      exp build run (erwin)

- Update to 1.2.6.
- Mark as broken on >= 7.x.

- Fix plist.
- Bump PORTREVISION.

Reported by:    itetcu (QA Tindy)

- Update to 1.2.5.

- Fix build after xorg cleanup

Submitted by:   pointyhat

- Remove unneeded dependency from gtk12/gtk20 [1]
- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Remove X11BASE support in favor of LOCALBASE or PREFIX
- Use USE_LDCONFIG instead of INSTALLS_SHLIB
- Remove unneeded USE_GCC 3.4+

Thanks to all Helpers:
        Dmitry Marakasov, Chess Griffin, beech@, dinoex, rafan, gahr,
        ehaupt, nox, itetcu, flz, pav

PR:             116263
Tested on:      pointyhat
Approved by:    portmgr (pav)

- Stop packaging mtree symlinks

PR:             ports/121691
Submitted by:   Scot Hetzel <swhetzel@gmail.com>

- Mark BROKEN with GCC 4.2

Reported by:    pointyhat
Approved by:    portmgr (hat)

Switch autoconf dependencies from 2.53 or 2.59 to 2.61.

PR:             ports/116639
Submitted by:   aDe

- Change my mail address to araujo@.

Approved by:    stas (mentor)

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

- Update to 1.2.4

PR:             ports/109319
Submitted by:   Marcelo Araujo <araujo@bsdmail.org> (maintainer)

- fixed pkg-plist
- pass maintainership to submitter

PR:             ports/108171
Submitted by:   Marcelo Araujo

- s,INSTALLS_SHLIB,USE_LDCONFIG,g
- these include dns/ editors/ emulators/ finance/
  games/ graphics/ maintained by ports@

PR:             ports/101916
Submitted by:   Gea-Suan Lin <gslin_AT_gslin dot org>

USE_GMAKE is spelled with an M not a N, but this port seems to build
fine without it, so remove it alltogether.

- Fix plist on gcc 2 (IE. FreeBSD 4) systems.
- Bump PORTREVISION.

Reported by:    pointyhat via kris

- Upgrade to 1.2.3.
- Use external libtiff.
- Unmark FORBIDDEN.
- Unmark BROKEN since it seems to work on FreeBSD 6.X+ and !i386 now
  (at least the platforms I could test).

Initial upgrade work by:        fenner

- Add SHA256

Remove EXPIRATION_DATE since upstream has released a new version to fix
the libtiff security issues I just haven't had the time to update the
port yet, but I will soon (unless somebody beats me to it :-) ).

Mark FORBIDDEN and set one month expiration due to multiple
vulnerabilities in embedded libtiff and no maintainer.

Security:       http://vuxml.FreeBSD.org/pkg-ivtools.html

Add missing file and bump PORTREVISION

Fix compile error.

BROKEN on 5.x: Does not compile

Approved by:    portmgr (self)

- Add the X_WINDOW_SYSTEM={xorg,xfree86-4,xfree86-3} variable to bsd.port.mk,
  and make XFREE86_VERSION map to it.  XFREE86_VERSION is now deprecated.
- Make xorg the default X_WINDOW_SYSTEM on -current.
- Add several new X_*_PORT variables which point to various pieces of X11 based
  on the setting of X_WINDOW_SYSTEM, and make ports use them.
- Add information to CHANGES about how to handle the transition.

PR:             ports/68763
Approved by:    portmgr (marcus)
Approved by:    re (scottl)

upgrade to 1.2.1

This is broken everywhere except i386 4.x

SIZEify.

Reset maintainer.  From personal email from current maintainer, in re
my asking if the port should be marked broken on -CURRENT:

  I am no longer interested in maintaining the FreeBSD port of ivtools.
  But I have addressed all of these problems, to the best of my knowledge,
  in the latest release of ivtools, 1.1.

Move inclusion of bsd.port.pre.mk to after all the variable definitions.

Mark as broken on alpha and sparc64 (fails to configure); also
mark as broken on i386 for -current (also fails to configure).
Informed maintainer.

Curiously, it seems to configure correctly on ia64.

Use imake-4 per default

PR:             54289
Submitted by:   Mark Linimon <linimon@lonesome.com>

Add another missing file

De-pkg-comment.

Add missing files

Update to 1.0.6

PR:             41888
Submitted by:   mt@primats.org.ua
Approved by:    maintainer

fix typo

Submitted by:   Scott Flatman <sf@dsinw.com>

add imake dependence
unbreak

PR:             39315
Submitted by:   maintainer

BROKEN: Does not build

add ivtools 1.0.3
Drawing editors derived from idraw

PR:             36316
Submitted by:   Scott Johnston <scott@accom.com>