Remove expired port:
2014-06-30 graphics/k3d: Broken for more than 5 months

- Switch devel/google-perftools to USES=libtool, drop .la files
- Bump dependent ports as .so version has changed

Approved by:	portmgr blanket

Update to 6.8.9-3 [1][3].

Use USES=compiler:openmp for the OPENMP option[2]
Ditch the use of perl for patching etc [4] and silence perl threaded check [6]
-delay option spurious message should be fixed [5]

JASPER option was replace by JPEG2000 for JP2k support.
Put 16BIT_PIXEL and HDRI option separate option block. These options change
  the library name, so the user needs to take this into consideration.
Use new LIB_DEPENDS syntax.
Use @sample for config files.
Sprinkle some USES=pkgconfig for some ports, since we don't pull it in
  anymore at run-time.

PR:		185462 [1]

Deprecated some ports that were already marked BROKEN in 2013

With hat:	portmgr

Update the default version of GCC used in the Ports Collection from
GCC 4.6.4 to GCC 4.7.3.  This entails updating the lang/gcc port as
well as changing the default in Mk/bsd.default-versions.mk.

Part II, Bump PORTREVISIONs.

PR:		182136
Supported by:	Christoph Moench-Tegeder <cmt@burggraben.net> (fixing many ports)
Tested by:	bdrewery (two -exp runs)

Chase boost and icu bump
While here convert some LIB_DEPENDS

Convert LIB_DEPENDS for ports depending on boost

Mark as broken: fails to configure

-- Could NOT find Doxygen (missing:  DOXYGEN_EXECUTABLE)
-- Configuring incomplete, errors occurred!
See also
"/wrkdirs/usr/ports/graphics/k3d/work/.build/CMakeFiles/CMakeOutput.log".
*** [do-configure] Error code 1

- Bump dependent ports' revisions (graphics/ilmbase and graphics/OpenEXR)

Approved by:	wg (mentor)

- Convert to dos2unix.mk
- While at it convert to gmake.mk ports that still USE_GMAKE.

graphics/ilmbase

- Update to 2.0.1
- Change master sites to SAVANNAH
- Change maintainer email to @FreeBSD.org
- Remove conflict with non existent Port
- USES pathfix pkgconfig
- Add executable
- Add DOCS Option
- Support STAGEDIR and add OPTIONS_SUB
- Use pathfix instead of simple patches
- Adjust patches
- Change WWW

graphics/OpenEXR

Update to libmpc version 1.0.1 which brings the following fixes:

 - Switched to automake 1.11.6, see CVE-2012-3386.
 - #14669: Fixed extraction of CC from gmp.h.
 - Fixed case of intermediate zero real or imaginary part in mpc_fma,
   found by hydra with GMP_CHECK_RANDOMIZE=1346362345.

This is on top of the following changes from version 1.0

 - Licence change towards LGPLv3+ for the code and GFDLv1.3+ (with no
   invariant sections) for the documentation.
 - 100% of all lines are covered by tests
 - Renamed functions
   . mpc_mul_2exp to mpc_mul_2ui
   . mpc_div_2exp to mpc_div_2ui

Add NO_STAGE all over the place in preparation for the staging support (cat:
graphics)

Replace USE_GCC=4.6+ and USE_GCC=4.4+ by USE_GCC=yes.

Right now this is a noop in the former case and a noop in the latter
case unless lang/gcc44 has been installed explicitly.

This puts a bit more emphasis on standardizing on a canonical version
"current" GCC and makes it easier to update that canonical version
by changing the default in Mk/bsd.gcc.mk and updating the lang/gcc port.

That is, USE_GCC=yes means "use a decent/modern version of GCC" without
having to worry about details.

Approved by:	portmgr (bdrewery)

- Remove MAKE_JOBS_SAFE variable

Approved by:	portmgr (bdrewery)

- Convert USE_GETTEXT to USES (part 4)

Approved by:	portmgr (bapt)

- convert USE_CMAKE to USES
- while here clean up some ports from CMAKE_VERBOSE, which is intended
  for users

Approved by:	portmgr (miwi)

Chase boost update

- Chase lib version changes from ilmbase and OpenEXR updates

- Update to version 0.8.0.2
- Update WWW: line
- Switch to optionsng
- Add LICENSE

PR:           ports/169418
Submitted by: KATO Tsuguru <tkato432 _at_ yahoo.com>
Approved by:  beat (mentor)

Conver to new options framework

- update png to 1.5.10

Update ImageMagick to 6.7.2-10 (shlib bumped to .5)

- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead

PR:             157936
Submitted by:   myself
Exp-runs by:    pav
Approved by:    pav

Remove USE_GNOME=gnometarget from ports. It has been a empty keyword since
mid 2008.

PR:             ports/159624
Submitted by:   Ruslan Mahmatkhanov <cvs-src@yandex.ru>

Build fixes with glib 2.28. gtk 2.24, gtkmm 2.24 and vala 0.12.

-remove MD5

Update ImageMagick to 6.6.2-10

- Bump Magick++, MagickWand or MagickCore dependency

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

- update to jpeg-8

- Switch SourceForge ports to the new File Release System: categories starting
with G

- Update boost to 1.39
- Split boost port to separate components, with boost-all metaport

PR:             ports/137054
Submitted by:   Alexander Churanov <churanov.port.maintainer@gmail.com>
(maintainer)

- update to jpeg7
Tested by:      pav on pointyhat

Brute-force patch ./configure and fix build with custom LOCALBASE.

Reported by:    QATty

- Update ImageMagick to 6.4.9.2
- Libraries Magick++, MagickCore and MagickWand bumped to 2
- Update all ports using libraries above

Reset dyeske@gmail.com at his request.

Hat:    portmgr

- Remove conditional checks for FreeBSD 5.x and older

Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)

- Chase graphics/ImageMagick shlib version bump

Pointyhat to: mi@

- Fix dependencies: remove gtk12 (it uses gtkmm24), only need netpbm in
  runtime and require libgnome if enable WITH_GNOME.
- Remove all X11BASE.
- Correct the --with-python for ${PREFIX} -> ${PYTHONBASE} to make it prefix
  safer.
- Bump the PORTREVISION.

[1] http://lists.freebsd.org/pipermail/freebsd-ports/2008-April/047850.html

Approved by:    maintainer timeout (two weeks)

Fix the build with new libsigc++20 2.2.2.

Reported by:    pointyhat via pav

- Tag broken with 5.x

Reported by:    pointyhat via pav
Approved by:    David Yeske <dyeske@gmail.com> (maintainer),
                linimon (mentor)

- Update to 0.6.7.0
- Remove conflicts

PR:             ports/116324
Submitted by:   <soralx@cydem.org> [pr]
Approved by:    David Yeske <dyeske@gmail.com> (maintainer)
                linimon (mentor)

Chase OpenEXR library version bumped.

dyeske at yahoo dot com -> dyeske at gmail dot com

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

- Remove FreeBSD 4.x checks.

PR:             ports/112021, ports/112035, ports/112064
Submitted by:   David Yeske <dyeske@yahoo.com> (maintainer)

o Update to 1.4.0
o Chase libraries version bump to depending on this port.

[NOTE]
I disabled FLTK support, so you can't use OpenEXR's applications.
Because I'm validating FLTK support.

Spotted by:     Nikolaj Thygesen <nikolaj.thygesen <@> diamondbox.dk>
Obtained from:  Florian Kainz <kainz <@> ilm.com>
Committed at:   AsiaBSDCon 2007 in Tokyo, Japan
Memorial Committing with:
                bushman, kuriyama, hrs, gnn, nobutaka, nyan, motoyuki, metal,
                simokawa, akiyama, ume, rwatson, pjd, mckusick, takawata,
                murray, cjh, brooks, daichi, delphij, ups, rrs

- Change dependencies reflecting update in graphics/ImageMagick
- Bump PORTREVISION

- Update lib after graphics/gts update.
- Bump portrevision.

Approved by:    maintainer via email (timeout 15 days), mnag (mentor).

Conversion to a single libtool environment.

Approved by:    portmgr (kris)

SHA256ify

Approved by: krion@

Chase libversion bumb to libMagick.so.9

PR:             ports/91270

Chase the plib update by bumping PORTREVISION, since it is statically
linked in.

Bump PORTREVISION and change dependencies to reflect update in graphics/gts

Mass-conversion to the USE_AUTOTOOLS New World Order.  The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.

Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.

Preliminary documentation can be found at:
        http://people.FreeBSD.org/~ade/autotools.txt

which is in the process of being SGMLized before introduction into the
Porters Handbook.

Light blue touch-paper.  Run.

Bump PORTREVISION to chase the glib20 shared library update.

BROKEN on amd64: Does not compile

Bump PORTREVISION to chase the glib20 shared lib version change.

- Chase ImageMagick shlib bump

PR:             ports/78455
Submitted by:   Arjan van Leeuwen <avleeuwen@piwebs.com> (ImageMagick's
maintainer)

Unbreak on FreeBSD-5.3 by upgrading to 0.4.4.0.

Register conflicts with atlas and superlu.

PR:             ports/76323
Submitted by:   maintainer.

This port is scheduled to be removed on 2005-02-18 if it is still
broken at that time, and a fix has not been submitted to GNATS.

Bump portrevision and dependency on ImageMagick
in order to trace recent ImageMagick update.

Submitted by:   Arjan van Leeuwen <avleeuwen@piwebs.com>
PR:             ports/74487
Approved by:    mat
Reviewed by:    lofi

- Chase gts update

BROKEN on 5.x: Does not compile

Approved by:    portmgr (self)

BROKEN on 4.x: Does not compile

pass maintainership

PR:             67064

add k3d 0.4.1.0
A free 3D modeling, animation, and rendering system