Remove expired ports:
2014-09-22 graphics/libggi: Unmaintained upstream
2014-09-22 devel/libgii: Unmaintained upstream
2014-09-22 graphics/fpc-ggi: Unmaintained upstream

Remove two libtool fixes from Mk/Uses/libtool.mk.  They don't always work
when an older version of a package is installed.  This is the case when an
executable links with installed libraries and with uninstalled libraries
that link with other uninstalled libraries.  For each of the directly
linked libraries the executable will have an rpath (/usr/local/lib for the
installed libraries and a path under WRKDIR for each of the uninstalled
libraries), but not for the indirect libraries.  Both ld(1) and rtld(1)
search the rpath of the executable first before any rpath of libraries, so
the indirectly linked libraries will be found in /usr/local/lib if they are
installed instead of in WRKDIR.

With this commit executables will overlink with uninstalled indirect
libraries again so their location is added to the rpath of the executable.

This partially reverts r358784.

PR:		191611
Approved by:	portmgr (bapt)

Deprecate GGI ports,  they are unmaintained upstream since several years
and the project website is now squatted.

Fix non default LIB_DEPENDS

With hat:	portmgr

Add 4 new sed commands to USES=libtool.  The first two apply some of the
changes that Debian made to their libtool.  The first command applies to
libtool versions 1.4 and up.  The second command is somewhat more elaborate
but essentially it uses the sed hold space to move an "elif...fi" block
down.  It applies to 2.x.  Together these reduce overlinking to unpatched
.la files (from ports that don't have USES=libtool yet but also .la files
in the work directory).

The third and fourth command fix relinking.  During staging libtool may
relink libA when it links to another library in the work directory libB.
The reason is that libA created during build phase has its runpath set to
the location of libB in the work directory.  This allows running an
executable that links to libA from within the work directory.  The relink
removes this extra runpath.

- Use libtool and tar:bzip2
- Strip binaries
- Use sample keyword

The FreeBSD x11@ and graphics team proudly presents
a zeising, kwm production, with help from dumbbell, bdrewery:

NEW XORG ON FREEBSD 9-STABLE AND 10-STABLE

This update switches over to use the new xorg stack by default on FreeBSD 9
and 10 stable, on osversions where vt(9) is available.
It is still possible to use the old stack by specifying WITHOUT_NEW_XORG in
/etc/make.conf .
FreeBSD 8-STABLE and released versions of FreeBSD still use
the old version.
A package repository with binary packages for new xorg will
be available soon.

This patch also contains updates of libxcb and related ports, pixman, as well

Convert to STAGEDIR

Add NO_STAGE all over the place in preparation for the staging support (cat:
graphics)

Cleanup the GGI ports:
- trim header
- remove a dead master site
- update my email address
- remove article in COMMENT
- add LICENSE
- use OPTIONS(NG)
- do not specify lib version in LIB_DEPENDS
- libvgl can be used on amd64 since ~3 years (libgii and libggi)
- libgii can use xxf86dga extension

PR:		ports/177332
Approved by:	bapt

The vast majority of pkg-descr files had the following format when they
had both lines:

Author: ...
WWW: ....

So standardize on that, and move them to the end of the file when necessary.

Also fix some more whitespace, and remove more "signature tags" of varying
forms, like -- name, etc.

s/AUTHOR/Author/

A few other various formatting issues

- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead

PR:             157936
Submitted by:   myself
Exp-runs by:    pav
Approved by:    pav

-remove MD5

- Chase direct-fb update

Submitted by:   Anatoly Borodin <anatoly.borodin@gmail.com>

- Switch SourceForge ports to the new File Release System: categories starting
with G

- Add missing xxf86vm to USE_XORG

Submitted by:   Antoine Brodin <antoine.brodin@laposte.net> (maintainer via
privat mail)

- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Bump PORTREVISION

Approved by:    portmgr (xorg cleanup)

- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Bump PORTREVISION

Approved by:    portmgr (xorg cleanup)

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

- Update to 2.2.2

PR:             ports/108457
Submitted by:   Antoine Brodin <antoine.brodin at laposte.net> (maintainer)

- Fix building with GCC 4.1 [1].
- Replace INSTALLS_SHLIB with USE_LDCONFIG [2].

PR:             ports/104648
Submitted by:   Antoine Brodin <antoine.brodin@laposte.net> (maintainer) [1]
Reworked by:    alepulver (myself) [2]

- Update to 2.2.1

PR:             ports/94617
Submitted by:   Antoine Brodin <antoine.brodin@laposte.net> (maintainer)

Conversion to a single libtool environment.

Approved by:    portmgr (kris)

- Fix when WITHOUT_X11 is set
- Bump PORTREVISION

PR:             92274
Submitted by:   Antoine Brodin <antoine.brodin@laposte.net> (maintainer)

- Update to 2.2.0 [1]
- Unsilence post-install and use ${INSTALL_DATA} rather than ${CP}

[1]:
PR:             ports/90285
Submitted by:   maintainer

- Add SHA256

ggiterm port:
- Don't use gmake
- Install ggitem.termcap and add message about it
- Utilize DATADIR
- Bump PORTREVISION

PR:             ports/89280
Submitted by:   Antoine Brodin (maintainer)

Mass-conversion to the USE_AUTOTOOLS New World Order.  The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.

Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.

Preliminary documentation can be found at:
        http://people.FreeBSD.org/~ade/autotools.txt

which is in the process of being SGMLized before introduction into the
Porters Handbook.

Light blue touch-paper.  Run.

- Update to 2.1.2

PR:             86504
Submitted by:   maintainer

- Update to 2.1.1
- Give maintainership to antoine.brodin@laposte.net
- Fix build on 4.X
- Use USE_LIBTOOL_VER=15

PR:             ports/80030
Submitted by:   Antoine Brodin <antoine.brodin@laposte.net>
Approved by:    adamw (mentor)

- Update to 2.1.0

PR:             ports/74744
Submitted by:   Antoine Brodin <antoine.brodin@laposte.net>

- Update to 2.0.5

PR:             ports/67635
Submitted by:   nsouch

SIZEify.

- Fix package for non-i386

- fix package

- Fix MLINKS

PR:             ports/62831
Submitted by:   Matthew Seaman <m.seaman@infracaninophile.co.uk>

Update to 2.0.4 and fix plist.  This encompasses nearly 9 months'
worth of changes, some of which are extensive; see ChangeLog
for details.  Note that the patchfiles are now incorporated into
the upstream version.

PR:             ports/62352
Submitted by:   Andrew Kenneth Milton <akm@theinternet.com.au>

SIZEify.

- Enable xf86dga
- Get rid of libtool archives
- Bump portrevision

PR:             ports/52380
Submitted by:   Pedro F. Giffuni <giffunip@yahoo.com>

Fix build on -CURRENT.

Although this port was updated 2.0b3 to 2.0.3, version 2.0b3 is
greater than 2.0.3.  So bump PORTEPOCH.

- add sourceforge as a master site
- add support for KGI4BSD

While I'm here, spaces -> ^I.

PR:             52091
Submitted by:   Pedro F. Giffuni <giffunip@yahoo.com>

Drop maintainership to ports@FreeBSD.org

Submitted by:   "Pedro F. Giffuni" <giffunip@yahoo.com>

update graphics/libggi from 2.0b3 to 2.0.3
transfer maintainership

PR:             51797
Submitted by:   Matthew West <mwest@uct.ac.za>

De-pkg-comment.

Fix pkg-plist.  file.{la,so} are not built because the mmap(2) check
in configure fails.

Submitted by:           bento
Approved by:            knu (mentor)

Add hidden dependency.    

Remove non-present files.    

Add some files to pkg-plist, and add etc/ files management.    

update graphics/libggi from 2.0b2.1 to 2.0b3   fixes MLINKS    

Convert category graphics to new layout.  

Rename INSTALLS_SHLIBS to INSTALLS_SHLIB.  (There was a typo in the   previous
commit message to bsd.port.mk, which said INSTALL_SHLIBS.  Boo.)    

Fourth round of INSTALLS_SHLIBS conversion.