*/*: Update WWW to use HTTPS for sourceforge.net projects

Homepage link is permanent redirected to its HTTPS counterpart
Issue reported by repology : https://repology.org/repository/freebsd/problems

Approved by:	portmgr (blanket)
PR:		274888

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

graphics: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  "Waitman Gobble" <uzimac@da3m0n8t3r.com>
  *  Aaron Dalton <aaron@FreeBSD.org>
  *  Abel Chow <ozsanh45vds001@sneakemail.com>
  *  Adam Weinberger <adamw@FreeBSD.org>
  *  Ade Lovett <ade@FreeBSD.org>
  *  Ade Lovett <ade@lovett.com>
  *  Akinori MUSHA aka knu <knu@idaemons.org>
  *  Aldis Berjoza <aldis@bsdroot.lv>
  *  Alex Hayward <xelah@xelah.com>
  *  Alex Ivasyuv <siegerstein@pochta.ru>
  *  Alex Samorukov <samm@os2.kiev.ua>

graphics/libgltext: prepare for freetype2 update

- freetype2 will no longer ship freetype-config (which was a pkg-config
wrapper) in the near future -- use pkg-config to gather the required
flags.

PR:             251512

graphics/mesa-libs: Bump reverse deps for libglvnd

Per discussion with bapt on helping pkg handle the changing of these
deps and avoiding impossible upgrade senarios.

PR:		246767
Reviewed by:	manu, bapt
Approved by:	x11
Differential Revision:	https://reviews.freebsd.org/D30824

Remove # $FreeBSD$ from Makefiles.

Add USES=xorg USES=gl, ports categories g

Add USES=xorg and USES=gl to ports in categories starting with 'g'.
While here, try to sprinkle other USES (mostly gnome and sdl) as needed.

- Switch to USES=localbase
- Switch to options helpers
- Unsilence installation commands

Approved by:	portmgr blanket

Revision bump of all ports with USE_GL after consolidation of mesa-libs

Approved by:	swills (mentor)
Differential Revision:	https://reviews.freebsd.org/D10845

When there is a do-install target, do not use a post-install target, do
everything at once.  Sometime, rename post-install into a options helper
target.

I did not fix ports that were such a mess that I could not figure out
what they really wanted to do.  I also did not change ports that had
some version of an auto-plist code in post-install, for the same reason.

With hat:	portmgr
Sponsored by:	Absolight

Convert tab after WWW: in pkg-descrs to single space as per PHB

Approved by:	portmgr blanket

Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.

With hat:	portmgr
Sponsored by:	Absolight

Cleanup plist

Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.

Part II, Bump PORTREVISIONs.

PR:		192025
Tested by:	antoine (-exp runs)
Approved by:	portmgr (implicit)

Add DOCS to OPTIONS_DEFINE to ports that check for PORT_OPTIONS:MDOCS.

- Switch to USES=libtool, drop .la files

Approved by:	portmgr blanket

The FreeBSD x11@ and graphics team proudly presents
a zeising, kwm production, with help from dumbbell, bdrewery:

NEW XORG ON FREEBSD 9-STABLE AND 10-STABLE

This update switches over to use the new xorg stack by default on FreeBSD 9
and 10 stable, on osversions where vt(9) is available.
It is still possible to use the old stack by specifying WITHOUT_NEW_XORG in
/etc/make.conf .
FreeBSD 8-STABLE and released versions of FreeBSD still use
the old version.
A package repository with binary packages for new xorg will
be available soon.

This patch also contains updates of libxcb and related ports, pixman, as well

- Fix install
- Add STAGE support
- Remove BROKEN

Mark broken: Fails to install

install  -o root -g wheel -m 444
/wrkdirs/usr/ports/graphics/libgltext/work/gltext-0.3.1/src/gltext.h
/usr/local/include
install: alpha/alpha: No such file or directory
*** Error code 71

Reported by:	pkg-fallout since august 2013
With hat:	portmgr

Add NO_STAGE all over the place in preparation for the staging support (cat:
graphics)

- adoption of optionsNG
- convert to USES in some cases (pkgconfig,pathfix)
- trim COMMENT/historical headers in some cases

Approved by:	portmgr (miwi)

Switch from libglut to freeglut and retire libglut. Libglut hasn't been
developed in years and has been dropped from the MESA 8.0 distribution.
Freeglut is a rewrite of glut and is actively developed and is used by
many linux distributions instead of libglut.

Bump all ports that directly depend on libglut because of the shlib version
change.

There are some extra items in this patch.

*) Because freeglut doesn't have the same dependancies as libglut, some ports
	need extra dependencies added to USE_XORG to make them build.
*) Mark graphics/f90gl broken, f90gl depends on a header that is only shipped
	with libglut.
*) Remove option for libglut/freeglut selection in games/cake, only freeglut
	remains now.
*) While here fix a png related build issue games/vegastrike.

Thanks to miwi for running the exp-run.

Approved by:	portmgr (miwi)

Collaboration with:	zeising@
Obtained from:	xorg-dev staging area.

- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead

PR:             157936
Submitted by:   myself
Exp-runs by:    pav
Approved by:    pav

-remove MD5

Sync to new bsd.autotools.mk

- Switch SourceForge ports to the new File Release System: categories starting
with G

-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.

It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.

With help:      marcus and kwm
Pointyhat-exp:  a few times by pav
Tested by:      pgollucci, "Romain Tartière" <romain@blogreen.org>, and
                a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by:    marcus
Approved by:    portmgr

- Fix typo
- Bump PORTREVISION

Reported by:    pav

Update CONFIGURE_ARGS for how we pass CONFIGURE_TARGET to configure script.
Specifically, newer autoconf (> 2.13) has different semantic of the
configure target. In short, one should use --build=CONFIGURE_TARGET
instead of CONFIGURE_TARGET directly. Otherwise, you will get a warning
and the old semantic may be removed in later autoconf releases.

To workaround this issue, many ports hack the CONFIGURE_TARGET variable
so that it contains the ``--build='' prefix.

To solve this issue, under the fact that some ports still have
configure script generated by the old autoconf, we use runtime detection
in the do-configure target so that the proper argument can be used.

Changes to Mk/*:
 - Add runtime detection magic in bsd.port.mk

- Remove unneeded dependency from gtk12/gtk20 [1]
- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Remove X11BASE support in favor of LOCALBASE or PREFIX
- Use USE_LDCONFIG instead of INSTALLS_SHLIB
- Remove unneeded USE_GCC 3.4+

Thanks to all Helpers:
        Dmitry Marakasov, Chess Griffin, beech@, dinoex, rafan, gahr,
        ehaupt, nox, itetcu, flz, pav

PR:             116263
Tested on:      pointyhat
Approved by:    portmgr (pav)

- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Bump PORTREVISION

Approved by:    portmgr (xorg cleanup)

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

Use libtool port instead of included version to avoid objformat a.out botch

Change maintainer address to my @FreeBSD.org email

Approved by:    garga (mentor)

GLText is a portable font rendering library for C++ OpenGL applications. It
uses FreeType2 to read and render high-quality TrueType fonts with a minimal
footprint. With just a few easy lines of C++, you can add gorgeously
rendered text to your graphical applications.

GLText is an open source project licensed under the LGPL. Basically this means
that you can use and link your application with it regardless of what license
your application uses. If you make changes to GLText, however,
you must make those changes open source under the LGPL.

Written with portablility in mind, GLText works on Windows, Linux, FreeBSD and
IRIX - virtually anywhere that FreeType2 supports.

WWW:    http://gltext.sourceforge.net

PR:             ports/93617
Submitted by:   Jose Alonso Cardenas Marquez <acardenas@bsd.org.pe>