graphics/mapserver: Update to 8.4.0

*/*: Bump consumers of graphics/proj

...due to version bump

graphics/gdal: Update to 3.10.0

- Bump PORTREVISION of dependent ports for shlib change

Changes:	https://github.com/OSGeo/gdal/releases
		https://github.com/OSGeo/gdal/blob/release/3.10/NEWS.md

graphics/mapserver: Update to 8.2.2

Add a MASTER_SITES

PR:		281344
Reported by:	diizzy@

graphics/proj: Update to 9.4.1

graphics/mapserver: Update to 8.2.1

Fix build with python option enabled[1]

PR:		280229[1]
Reported by:	rhurlin@FreeBSD.org[1]

graphics/mapserver: Update to 8.2.0

graphics/mapserver: Improve port

* Modernize Makefile
* Reduce amount of options and align port to closer match other
  distros in terms of functionality
* Switch to from libsvg to librsvg2
* Remove invalid options (such as PHP)
* Prefix binaries
* Use framework helpers for INSTALL sections

PR:		279897
Reviewed by:	wen (maintainer)

graphics/mapserver: Update to 8.0.2

graphics/gdal: Update to 3.9.0

- Bump PORTREVISION of dependent ports for shlib change
  - databases/postgis31 is skipped due to
  - graphics/R-cran-rgdal is skipped due to build failure and removed from CRAN
repository

Changes:	https://github.com/OSGeo/gdal/releases
		https://github.com/OSGeo/gdal/blob/release/3.9/NEWS.md

graphics/proj: Update to 9.4.0

*/*: Bump jpeg-turbo users treewide

New major version 3.0.0

graphics/proj: Update to 9.2.1

graphics/gdal: Update to 3.7.0

Changes:	https://github.com/OSGeo/gdal/releases
		https://github.com/OSGeo/gdal/blob/release/3.7/NEWS.md

graphics/mapserver: Update to 8.0.1

*: Bump PORTREVISIONs for math/mpc update to 1.3.1

graphics/mapserver: Update to 8.0.0

graphics/proj: Update to 9.2.0

graphics/proj: Update to 9.1.1

graphics/proj: Update to 9.1.0

Release notes:
https://proj.org/news.html#id37

Also remove proj-data dependency.

You can use proj to retrieve data or install graphics/proj-data
manually.

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

*/*: bump all consumers after recent boost upgrade

graphics: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  "Waitman Gobble" <uzimac@da3m0n8t3r.com>
  *  Aaron Dalton <aaron@FreeBSD.org>
  *  Abel Chow <ozsanh45vds001@sneakemail.com>
  *  Adam Weinberger <adamw@FreeBSD.org>
  *  Ade Lovett <ade@FreeBSD.org>
  *  Ade Lovett <ade@lovett.com>
  *  Akinori MUSHA aka knu <knu@idaemons.org>
  *  Aldis Berjoza <aldis@bsdroot.lv>
  *  Alex Hayward <xelah@xelah.com>
  *  Alex Ivasyuv <siegerstein@pochta.ru>
  *  Alex Samorukov <samm@os2.kiev.ua>

graphics/mapserver: Fix CPE information because current one is deprecated

Approved by:    portmgr (blanket)

graphics/mapserver: Update to 7.6.4

Remove # $FreeBSD$ from Makefiles.

graphics/gdal: Set the default options as a workable set

- reinstate r552962 (was reverted in r553000)
- remove pkg-message from qgis and qgis-ltr
- Bump PORTREVSION on all consumers

PR:		224004
Approved by:	portmgr

- Update to 7.6.2

graphics/proj: Update to 7.2.0

Changelog:
  - https://proj.org/news.html#release-notes

graphics/proj: Update to 7.1.1

- Add a pkg-message explaining how to access or sync datum grids from the CDN
  (disabled by default)
- Add curl and tiff dependencies since proj can read datum grids from remote
  COG (Cloud Optimized Geotiff)
- Take maintainer'ship (ok wen@)

PR:		245611
Submitted by:	wen (first version)
Reviewed by:	wen, rhurlin
Approved by:	wen
Exp-run by:	antoine

- Build PYTHON option with python3

- Update to 7.6.1

Move devel/swig30 to devel/swig and update to 4.0.1

- Do not silence installation message
- Update dependent ports:
  - Fix build with swig 4.0.1
  - Update *_DEPENDS
  - Remove BINARY_ALIAS

Changes:	http://www.swig.org/news.php
PR:		246613
Exp-run by:	antoine

- Update to 7.6.0

- update libgd to 2.3.0
- new option RAQM
- resurrect deprecated gdlib-config
- bump dependend ports

- Update to 7.4.4

- Update to 7.4.3

Bump PORTREVISION for graphics/gdal shlib change

- Update to 7.4.1

Bump PORTREVISION for ports depending on the canonical version of GCC
as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3
to GCC 9.1 under most circumstances now after revision 507371.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.

PR:		238330

- Update to 7.4.0

- Fix build without fribidi [1]
- Fix build with GCC-based architectures [2]
- Update and sort options

PR:		225336[1], 237598[2]
Submitted by:	igorz@yandex.ru[1], pkubaj@[2]

- Update to 7.2.2

Change cmake default behaviour to outsource.

Ports that build out of source now simply can use "USES=cmake"
instead of "USES=cmake:outsource". Ports that fail to build
out of source now need to specify "USES=cmake:insource".

I tried to only set insource where explictely needed.

PR:		232038
Exp-run by:	antoine

Remove version 7.0 from the IGNORE_WITH_PHP list.

Update MASTER_SITES and WWW

Approved by:	portmgr (blanket)

- Update to 7.2.1

Reduce dependency on the python2 metaport

PR:		225752
Submitted by:	Yasuhiro KIMURA

Remove superfluous linefeeds and fix some other minor whitespace bugs.

Switch from swig 2.0 to swig 3.0

- Update to 7.0.7

- Update to 7.0.6

- Update to 7.0.5

- Update to 7.0.4

- Update to 7.0.3

Remove obsolete PHP versions checks.

Sponsored by:	Absolight

- Apply a upstream patch to fix the build with php

Reported by:	ivtopol@gmail.com(via email)

- Update to 7.0.2

Don't use extension.ini any more, and have each extension install in its
file, so the order remains the same.

Every PHP (or Zend) extension now installs its own .ini file in
/usr/local/etc/php.  A PHP extension will be automatically activated
when installed.  The order into which extensions are loaded is
automatically guessed.  In some very rare cases, the guess will be
wrong, and PHP_MOD_PRIO will need to be set.  Refer to the USES=php
section of the Porter's Handbook for more information.

Convert ports touching etc/php/extensions.ini manually, or telling the
OP to do it.

And finally, bump PORTREVISION for all php extensions.

PR:		210697
Submitted by:	mat
Sponsored by:	Absolight
Differential Revision:	https://reviews.freebsd.org/D7022

- update libgd to 2.2.2
- new MASTER_SITES
- add security patch
PR:		210913
Submitted by:	Piotr Kubaj
MFH:		2016Q3
Security: CVE-2015-8874
Security: CVE-2016-3074
Security: http://www.openwall.com/lists/oss-security/2016/07/12/4

When there is a do-install target, do not use a post-install target, do
everything at once.  Sometime, rename post-install into a options helper
target.

I did not fix ports that were such a mess that I could not figure out
what they really wanted to do.  I also did not change ports that had
some version of an auto-plist code in post-install, for the same reason.

With hat:	portmgr
Sponsored by:	Absolight

- Fix trailing whitespace in pkg-descrs, categories [g-n]*

Approved by:	portmgr blanket

- Set CAIRO_SVG and KML as default options

Suggested by:	usrbinerl@ya.ru(via email)

Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.

With hat:	portmgr
Sponsored by:	Absolight

- Correct link the .so lib file

PR:		207623
Submitted by:	jjachuf@gmail.com

- Update to 7.0.1
- Pet portlint

Remove PHP 5.4 from the Ports Tree, it expired upstream in 2015-Q3 and the
ports expired last month.

Adjust Mk/bsd.php.mk

Reviewed by:	antoine, marino
Approved by:	portmgr (antoine)
Differential Revision:	https://reviews.freebsd.org/D5278

Update giflib to 5.1.1

PR:		204492

Allow building with giflib 5.1

PR:		204492

- Update to 7.0.0

- Update to 2.0.0
- Bump PORTREVISION for graphics/gdal shlib change
- Mark astro/merkaartor as BROKEN

Changes:	http://trac.osgeo.org/gdal/wiki/Release/2.0.0-News

Convert to USES=jpeg

- Update graphics/proj to 4.9.1
- Bump PORTREVISION to chase the update of proj

PR:		200434
Submitted by:	wen@(myself)
Approved by:	maintainer(timeout, >20 days)

- Add CPE info
- Add LICENSE

Approved by:	portmgr blanket

Update graphics/giflib to 5.0.5

Differential Revision:	https://reviews.freebsd.org/D1361
Submitted by:	bapt
Reviewed by:	self
Exp-run by:	self

Bump portrevision after png update

Change libpng15.so to libpng.so in LIB_DEPENDS to prepare the upgrade

Replace USES=libtool:oldver with USES=libtool or USES=libtool:keepla in
the 32 ports that still use it.  Bump PORTREVISION on their dependent
ports except the ones that depend on these:

audio/libogg
audio/libvorbis
devel/pcre
ftp/curl
graphics/jpeg
graphics/libart_lgpl
graphics/tiff
textproc/expat2
textproc/libxslt

In these cases the same trick as in the recent gettext update is used.

Cleanup plist

- Pass correct value to configure with WMS_CLIENT and WFS_CLIENT option

PR:		194266
Submitted by:	Julien Cigar<jcigar@ulb.ac.be>

converters/fribidi:
- Add USES=libtool and bump dependent ports
- Add INSTALL_TARGET=install-strip

- Update to 6.4.1
- Fix build with python option [1]
- Fix run error while reading MapInfo layer with AUTO styleitem [2]

PR:		189940 [1]
Submitted by:	Julien Cigar<jcigar@ulb.ac.be> [1]
		marten.ambroz@seznam.cz (via email) [2]

- Add missing USE_LDCONFIG
- Use USES=libtool
- Fix USE_PYTHON
- Convert to new options helper
- Bump PORTREVISION for package change
- Do not hard-coded PORTVERSION in PLIST
- Bump PORTREVISION for graphics/geos shlib change

- Remove USE_AUTOTOOLS=libtool
- Bump PORTREVISION for package change
- Bump PORTREVISION for graphics/gdal shlib change [1]

Approved by:	portmgr (implicit) [1]

- Add options CLIENT_WMS CLIENT_WFS

o Do not require Apache as dependency. Mapserv can be used as FastCGI with
  any other web server (e.g. nginx). Always install mapserv binary. [1]
o USES libiconv, if uses libgdal. This fixes build with WMS on. [2]

PR:		191168 [1]
PR:		191167 [2]
Approved by:	wen

Add explicit libxml2 dependency

- Install files into ${PREFIX} instead of ${LOCALBASE}

- Stage support

The FreeBSD x11@ and graphics team proudly presents
a zeising, kwm production, with help from dumbbell, bdrewery:

NEW XORG ON FREEBSD 9-STABLE AND 10-STABLE

This update switches over to use the new xorg stack by default on FreeBSD 9
and 10 stable, on osversions where vt(9) is available.
It is still possible to use the old stack by specifying WITHOUT_NEW_XORG in
/etc/make.conf .
FreeBSD 8-STABLE and released versions of FreeBSD still use
the old version.
A package repository with binary packages for new xorg will
be available soon.

This patch also contains updates of libxcb and related ports, pixman, as well

- Fix build with python option
- Convert to new so file format

Python cleanup:
- USE_PYTHON* = 2.X -> USE_PYTHON* = 2
- USE_PYTHON* = 2.X+ -> USE_PYTHON* = yes
Reviewed by:	python (mva, rm)
Approved by:	portmgr-lurkers (mat)

Update freetype to 2.5.2.

Remove patch to add -I/usr/local/include in freetype-config --cflags. If
ports need extra headers they should look for them, and not get them via
a side-effect.

Freetype had a header resuffle in 2.5.1, patch ports to use the new header
style.

Thanks go to bdrewery for the two exp-runs and rakuco for helping me with
some troublesome cmake ports.

PR:		ports/184587

- Fix the run error of missing shared object

PR:		184627
Submitted by:	Julien Cigar <jcigar@ulb.ac.be>

- Update to 6.4.0

Add NO_STAGE all over the place in preparation for the staging support (cat:
graphics)

Convert to new perl framework
Convert from USE_GMAKE to USES=gmake

graphics/geos: update to 3.4.2

- Update to 3.4.2 [1]
- Bump PORTREVISION for dependent ports
- USES gmake
- Use options helpers

PR:		ports/181422 [1]
Submitted by:	Rainer Hurling <rhurlin gwdg.de> (maintainer)

- Update to 1.10.0
- Update COMMENT and remove leading indefinite article from COMMENT
- Bump PORTREVISION for graphics/gdal shlib change

Changes:	http://trac.osgeo.org/gdal/wiki/Release/1.10.0-News