Remove expired port:
2016-12-08 graphics/ocrfeeder: Depends on broken and expired py-reportlab2

Chase print/py-reportlab2 expiration

Most commonly used build systems support silent builds, when they
hide actual commands executed and only show short summary line (like
"CC foo.c"). CMake and ninja enable this by default, some autotools
using ports do as well. This is unacceptable because we need complete
build logs at any time, so we now switch to verbose build logs
unconditionally. Note that this change deliberately affects ALL
builds and not only package builds on cluster, because we need to
be sure that user experiencing failure can always provide informative
build log regardless of settings and without rerunning the build.

Change summary:

- Always do verbose builds for cmake, ninja and GNU configure (the
  latter includes check if --disable-silent-rules is actually supported
  by the configure script; there are isolated cases when it's not true)

Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.

With hat:	portmgr
Sponsored by:	Absolight

Make print/ghostscript9-agpl-base the default Ghostscript port.  Upstream
changed the license to the AGPL 3 in version 9.07 so print/ghostscript9-base
is stuck at 9.06 which is almost 4 years old now.

Fix the logic in Uses/ghostscript.mk so "agpl" is treated as a real version
on its own instead of as a variant of other versions.

Fix print/ghostscript9-agpl-base to install eps2write.

Update math/asymptote to 2.37 to support newer Ghostscript.

PR:		208159
Exp-run by:	antoine
Approved by:	portmgr (antoine)

- Split ghostscript into X11-independent and -dependent parts:

 * print/ghostscript{7,8,9,9-agpl}-base

   Installs Ghostscript binary, libgs, and related files.
   These ports do not depend on X11 libraries (i.e. x11* devices
   are not available).  USES=ghostscript will set dependency on
   one of them depending on GHOSTSCRIPT_DEFAULT.

   The default device is set to "display" or "bbox".

 * print/ghostscript{7,8,9,9-agpl}-x11

   Installs a shared library which provides X11 support to
   the installed Ghostscript binaries.  x11* devices will be

Part 1 of adding USE_GNOME=intltool to ports that require it.

The reason for this is that in the GNOME 3.16 update, USE_GNOME gtk20 and
gtk30 don't pull intltool in anymore.

PR:		201980
Exp-run by:	antoine@

Convert code in bsd.port.mk for USE_GHOSTSCRIPT* to USES=ghostscript.

Add GHOSTSCRIPT_DEFAULT to bsd.default-versions.mk for easy version selection.
Arguments supported: <empty>, build, run, nox11 and agpl

PR:		201201 (exp-run)
Approved by:	portmgr (mat@)
Exp run by:	antione@ (previous patch)
Differential Revision:	https://reviews.freebsd.org/D2938

Upgrade to 0.8.1.

PR:		197438
Submitted by:	Ports Fury.

Get rid of gnomehier

- Convert ports of graphics/ to new USES=python

Approved by:	portmgr (implicit)

Cleanup plist

Unbreak ocrfeeder, it depended on both py-imaging (via self+py-sane) and
py-pillow (via py-reportlab2)

- Set CPPFLAGS and LIBS in a number of ports so configure can find libintl.h
  and libintl.so.  This fixes a problem where DATADIRNAME gets an incorrect
  value which causes locale files to be installed in the wrong place.
- The only configure checks that still need to be patched are related
  to intltool so move DATADIRNAME patching from USES=pathfix to
  USE_GNOME=intlhack.

- games/klavaro: remove excessive dependencies
- japanese/libskk: add INSTALL_TARGET=install-strip
- math/libqalculate: add INSTALL_TARGET=install-strip and remove pthread
  patching
- multimedia/freetuxtv: remove excessive dependencies
- science/gramps: fix shared-mime-info use

Exp-run by:	antoine
Approved by:	portmgr (antoine)

Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.

Part II, Bump PORTREVISIONs.

PR:		192025
Tested by:	antoine (-exp runs)
Approved by:	portmgr (implicit)

graphics/ocrfeeder: update to 0.8

PR:		192478
Submitted by:	Ports Fury

graphics/ocrfeeder: update to 0.7.11

- Adjust depends
- Support stage
- New world order USES

PR:		192205
Submitted by:	tkato432 yahoo com

Reset maintainership for ports not staged with no pending PR

With hat:	portmgr

graphics/ocrfeeder: Unbreak with USE_GNOME+= gnomedocutils

approved by:	portmgr (bapt)

Update the default version of GCC used in the Ports Collection from
GCC 4.6.4 to GCC 4.7.3.  This entails updating the lang/gcc port as
well as changing the default in Mk/bsd.default-versions.mk.

Part II, Bump PORTREVISIONs.

PR:		182136
Supported by:	Christoph Moench-Tegeder <cmt@burggraben.net> (fixing many ports)
Tested by:	bdrewery (two -exp runs)

Remove trailing whitespaces from category graphics

According to the Porter's Handbook (5.12.2.3.) default options must be added to
OPTIONS_DEFINE. This policy has been implemented only recently that's why we
have many ports violating this policy.

This patch adds the default options specified in the Porter's Handbook to
OPTIONS_DEFINE where they are being used. Ports maintained by
gnome@FreeBSD.org, kde@FreeBSD.org and x11@FreeBSD.org have been excluded.

Approved by:    portmgr (bapt)

Update to libmpc version 1.0.1 which brings the following fixes:

 - Switched to automake 1.11.6, see CVE-2012-3386.
 - #14669: Fixed extraction of CC from gmp.h.
 - Fixed case of intermediate zero real or imaginary part in mpc_fma,
   found by hydra with GMP_CHECK_RANDOMIZE=1346362345.

This is on top of the following changes from version 1.0

 - Licence change towards LGPLv3+ for the code and GFDLv1.3+ (with no
   invariant sections) for the documentation.
 - 100% of all lines are covered by tests
 - Renamed functions
   . mpc_mul_2exp to mpc_mul_2ui
   . mpc_div_2exp to mpc_div_2ui

Add NO_STAGE all over the place in preparation for the staging support (cat:
graphics)

Add an explicit dependency on pkgconf

Convert from WITHOUT_NLS to PORT_OPTIONS:MNLS

- Convert USE_GETTEXT to USES (part 3)

Approved by:	portmgr (bapt)

- update png to 1.5.10

- Update to 0.7.7
- Account for DISABLE_NLS
- Add patch for runtime bug

PR:     ports/164202
Submitted by: maintainer
Approved by:    crees, rene (mentors)

OCRFeeder is a document layout analysis and optical character recognition
system.

Given the images it will automatically outline its contents, distinguish
between what's graphics and text and perform OCR over the latter. It generates
multiple formats being its main one ODT.

It features a complete GTK graphical user interface that allows the users to
correct any unrecognized characters, defined or correct bounding boxes, set
paragraph styles, clean the input images, import PDFs, save and load the
project, export everything to multiple formats, etc. OCRFeeder was developed
as the project of the Master's Thesis in Computer Science of Joaquim Rocha.

WWW: http://live.gnome.org/OCRFeeder

PR:             ports/159549
Submitted by:   Kuan-Chung Chiu <buganini@gmail.com>
Approved by:    miwi, wen (mentors implicit)