*/*: Bump consumers of graphics/imlib2

New version of imlib2 in tree

*/*: Bump consumers of graphics/imlib2

New version of imlib2 in tree

graphics/p5-Image-Imlib2: Fix build with graphics/imlib2 1.12.1

Add minimal support to `pkg-config imlib2`; imlib2-config has been
dropped since imlib2-1.7.5.

PR:		276439
Approved by:	portmgr (buildfix blanket)

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

graphics: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  "Waitman Gobble" <uzimac@da3m0n8t3r.com>
  *  Aaron Dalton <aaron@FreeBSD.org>
  *  Abel Chow <ozsanh45vds001@sneakemail.com>
  *  Adam Weinberger <adamw@FreeBSD.org>
  *  Ade Lovett <ade@FreeBSD.org>
  *  Ade Lovett <ade@lovett.com>
  *  Akinori MUSHA aka knu <knu@idaemons.org>
  *  Aldis Berjoza <aldis@bsdroot.lv>
  *  Alex Hayward <xelah@xelah.com>
  *  Alex Ivasyuv <siegerstein@pochta.ru>
  *  Alex Samorukov <samm@os2.kiev.ua>

Remove # $FreeBSD$ from Makefiles.

Update WWW

search.cpan.org is shutting down.
It will redirect to metacpan.org after June 25, 2018.

With hat:	perl

Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.

With hat:	portmgr
Sponsored by:	Absolight

Remove build dependency on p5-Test-Simple.

As long as the PORTREVISION is getting bumped, stop installing CHANGES.

- Remove Mk/bsd.efl.mk
- Convert USE_EFL=libtool_hack to USES=libtool
- Convert USE_EFL=imlib2 to LIB_DEPENDS=libImlib2.so:...
- Bump PORTVERSION in graphics/imlib2 and in all ports
  which depends on imlib2

PR:		196062
Approved by:	portmgr

Change the way Perl modules are installed, update the default Perl to 5.18.

Before, we had:

  site_perl :           lib/perl5/site_perl/5.18
  site_perl/perl_arch : lib/perl5/site_perl/5.18/mach
  perl_man3 :           lib/perl5/5.18/man/man3

Now we have:

  site_perl : lib/perl5/site_perl
  site_arch : lib/perl5/site_perl/mach/5.18
  perl_man3 : lib/perl5/site_perl/man/man3

Modules without any .so will be installed at the same place regardless of the

Cleanup plist

Remove NOPORTDOCS and NOPORTEXAMPLES.

Remove all the bootstrap files (.bs) from the plists.

Starting with perl 5.20, they're not installed any more if empty,
and on FreeBSD, they're (always ?) empty.

PR:		190681
Submitted by:	mat
Exp-Run by:	antoine
Sponsored by:	Absolight

Support STAGEDIR.

Try and be consistent with what commands are silent and not in *install.

- MKDIR is silent
- ECHO is silent
- INSTALL_* are not silent
- CP/FIND/... are not silent

I fixed a few PORTDOCS misusage, I'll do a second pass.

With Hat:	perl@

Fix NO_STAGE attribution

Add NO_STAGE all over the place in preparation for the staging support (cat:
graphics)

- Convert to new perl framework
- Trim Makefile header
- Remove MAKE_JOBS_SAFE=yes, it's the default.

- Remove SITE_PERL from *_DEPENDS

Submitted by:   az@

- update png to 1.5.10

- Cleaning MD5 in perl@'s ports.

Approved by:    erwin@ (portmgr)

- only 13% of the p5- ports embed @comment $FreeBSD$:
  so standarize and remove it

With Hat:   perl@

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

- update to jpeg-8

- Update to 2.03

- bump all port that indirectly depends on libjpeg and have not yet been bumped
or updated
Requested by:   edwin

- Update to 2.02

Update to 2.01

- Take advantage of CPAN macro from bsd.sites.mk, change
${MASTER_SITE_PERL_CPAN} to CPAN.

PR:             ports/122674
Submitted by:   Philip M. Gollucci <pgollucci@p6m7g8.com>
Reworked by:    araujo (myself)
Approved by:    portmgr (pav)

- Update enlightenment-devel and EFL libraries to the latest snapshot
- Deprecate old unsupported apps and modules (entice, devian, eveil, engage)
- Split evas and ecore to separate modules to handle dependencies properly
- Disable PAM in enlightenment-devel as it don't work anyway (requires root
  privilegies)
- Add DBUS support.

Thanks to:      az

- Update to 2.00

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

- Update e17 ports to 20070223 snapshot
- Bump portrevisions on all imlib2-dependend ports as the library soversion
  was bumped [1]
- Disable fade-in effects in x11-fm/evidence permanently, since evas doesn't
  support it anymore. [2]

The patch was tested in the tinderbox.

Approved by:    portmgr (marcus) [1],
                Anders Troback <freebsd@troback.com> (maintainer) [2]

- Update to 1.13

PR:             ports/104420
Submitted by:   Gea-Suan Lin <gslin_AT_gslin dot org>

Update to 1.12

PR:             102094
Submitted by:   Gea-Suan Lin <gslin@gslin.org>

- update to 1.11

- update to 1.10

- Update to v1.09
- Rename patchfiles to satisfy portlint

Approved by:    tobez (implicit)

- update to 1.08

Replace ugly "@unexec rmdir %D... 2>/dev/null || true" with @dirrmtry

Approved by:    krion@
PR:             ports/88711 (related)

Take a perl@ hat and add SHA256 checksums

search.cpan.org redirect reduction canonicalization project, pass 1:
URLs automatically rewritten from /search?dist=Foo or /dist/Foo
to /dist/Foo/ (note trailing slash).  After a 2002(!) reorganization,
this is the preferred way to refer to modules on search.cpan.org.

This pass brought to you by http://people.freebsd.org/~fenner/fix-search

Update to 1.07

Update to 1.06

Update to 1.05

Bump PORTREVISION on all ports that received the imlib2 shlib chase.

1: Upgrade imlib2 to 1.2.0
2: chase shared library version to 3.

PR:             ports/78347
Submitted by:   Russell Jackson <raj at cserv62.csub.edu>
Somepart by:    me

Update to 1.04
Add some doc & examples.

Update to 1.03

Compensate for braindead xsubpp in 5.005_03.  Now it actually
works correctly with older perls.

While at it, assign maintainership to perl@, it should deal with
this port better than ports@.

Update to 1.02

Approved by:    erwin (mentor)

Unbeak for 5.005

- Update to 1.01
- Remove BROKEN
- Use MODBUILD

While I'm here, fix copy/paste error in comment that I botched
when I added the port. This port still doesn not work with
perl 5.005_03, so mark it IGNORE for that version

Based on:
PR:             62416
Submitted by:   Dominic Mitchell <dom@happygiraffe.net>

BROKEN on 5.x: does not compile

SIZEify.

- Use canonical form (ports@FreeBSD.org) in MAINTAINER line

- Chase libraries for new Imlib2 version

Add -fPIC to cflags which hopefulle fixes amd64

Tested on:      i386
Submitted by:   bento via kris

Add p5-Image-Imlib2

Image::Imlib2 is a Perl port of Imlib2, a graphics library
that does image file loading and saving as well as manipulation,
arbitrary polygon support, etc. It does ALL of these operations
FAST. It allows you to create colour images using a large number
of graphics primitives, and output the images in a range of formats.

PR:             56701
Submitted by:   erwin