Rapid Photo Downloader imports photos and videos from cameras, phones,
memory cards and other devices at high speed. It can be configured to
rename photos and videos with meaningful filenames you specify. It can
also back up photos and videos as they are downloaded. It downloads
from and backs up to multiple devices simultaneously.
===> The following configuration options are available for rapid-photo-downloader-0.9.26_15:
COLOUR=on: generates coloured program output
PROGRESS=on: shows a progress bar on the command line
===> Use 'make config' to modify these settings
devel/py-xdg: rename to devel/py-pyxdg to match Python package name
While here:
- switch to USE_PYTHON=pep517
- pull in upstream commits addressing Python 3.12, 3.14, 3.15 compat
python: bump all USE_PYTHON=distutils consumers after RUN_DEPENDS removal
Any missed ports, feel free to bump.
Any ports that need setuptools at runtime can have the devel/py-setuptools
manually added back to RUN_DEPENDS, but understand that this practice
is deprecated; see CHANGES for details.
devel/py-gobject3: use USE_GNOME=pygobject3 helper
The helper is equivalent to the previous explicit dependency
declaration so no functional or metadata changes.
With hat: gnome
PR: 273722
*/*: Remove qtbuilder and sip from RUN_DEPENDS
devel/py-qtbuilder and devel/py-sip should only be used as a
BUILD_DEPENDS. (e.g. USE_PYQT=qtbuilder:build sip:build)
Usually, these are only used to build the PyQt framework, but a few
other ports need them to build. Ports that have them as a BUILD_DEPENDS
unnecessarily haven't been audited yet.
Sip used to be needed for run, but this hasn't been the case for quite
some time. Runtime is provided by the devel/py-qt[56]-sip ports.
(USE_PYQT=pysip). The main PyQt ports provide this automatically, so
it isn't necessary to add it to individual consumers.
While here:
www/onionshare: Remove PyQt stuff completely. It uses PySide.
With hat: kde@
devel/py-python-dateutil: Move devel/py-dateutil to devel/py-python-dateutil
- Convert to USE_PYTHON=pep517
- Bump PORTREVISION of dependent ports for dependency change
- While I'm here, update audio/py-pyradio to use PYTHON_PKGNAMEPREFIX instead of
PKGNAMEPREFIX for *_DEPENDS
all: remove explicit versions in USES=python for "3.x+"
The logic in USES=python will automatically convert this to 3.8+ by
itself.
Adjust two ports that only had Python 3.7 mentioned but build fine
on Python 3.8 too.
finance/quickfix: mark BROKEN with PYTHON
libtool: compile: c++ -DHAVE_CONFIG_H -I. -I../.. -I -I. -I.. -I../.. -I../C++
-DLIBICONV_PLUG -DPYTHON_MAJOR_VERSION=3 -Wno-unused-variable
-Wno-maybe-uninitialized -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong
-fno-strict-aliasing -DLIBICONV_PLUG -Wall -ansi
-Wno-unused-command-line-argument -Wpointer-arith -Wwrite-strings
-Wno-overloaded-virtual -Wno-deprecated-declarations -Wno-deprecated -std=c++0x
-MT _quickfix_la-QuickfixPython.lo -MD -MP -MF
.deps/_quickfix_la-QuickfixPython.Tpo -c QuickfixPython.cpp -fPIC -DPIC -o
.libs/_quickfix_la-QuickfixPython.o
warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean
'-Wno-uninitialized'? [-Wunknown-warning-option]
QuickfixPython.cpp:175:11: fatal error: 'Python.h' file not found
^~~~~~~~~~
1 warning and 1 error generated.
Reviewed by: portmgr, vishwin, yuri
Differential Revision: <https://reviews.freebsd.org/D40568>
PyQt: Update to latest versions
- PyQt5: update to 5.15.9
- PyQt6: upate to 6.4.2
- PyQt6-sip: update to 13.4.1
- PyQt5-sip: update to 12.11.1
- PyQt-builder: update to 1.14.1
- sip: upate to 6.7.7
PR: 269751
Exp-run by: antoine
Mk/Uses: always use colon for build/run suffix
Most USES use a colon for build/run(/test) suffixes. Change kde.mk,
qt.mk and pyqt.mk to do the same, and update all ports using that.
Document in CHANGES.
PR: 266034
Exp-run by: antoine
Approved by: tcberner (mentor)
Differential Revision: https://reviews.freebsd.org/D36349
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner)
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
PyQt: Update sip to 6.5.0, reintroduce sip4 and simplify PyQt framework.
SIP:
As mentioned in the update from sip to sip5, this is a transitional version
to remove what is deprecated in sip4.
Sip6 completely removes the deprecated parts.
Unfortunately, some ports — mostly cura things — can not use sip6, so we
reintroduce sip4.
PyQt:
At the same time, we took the opportunity to simplify PyQT and propose only one
package as for devel/pyside2. */py-qt5-* have been merged — excepted chart,
networkauth and webengine — into devel/py-qt5-pyqt.
This allows us to be in adequacy with the packages that the author of these
(Only the first 15 lines of the commit message are shown above )
PyQt5: Update PyQt5 to 5.15.3, QScintilla2 to 2.12.0, py-qtbuilder to 1.9.0
* PyQt5: update to 5.15.3
This is a minor feature and bug-fix release. There are corresponding releases of
the other PyQt5-related packages.
- Added the missing QImage.setAlphaChannel().
- Support for the QtNetworkAuth library has been moved to a separate
PyQtNetworkAuth package.
- Wheels no longer bundle the corresponding Qt libraries and instead
automatically install them from an external wheel.
* QScintilla2: update to 2.12.0
This adds support for Qt6 and removes support for Qt4.
- Change the new distname (again)i due to a conflict
- Use the new sip-build system
* devel/py-qtbuilder: update to 1.9.0
* devel/py-sip: fix flavor for sip-distinfo
PR: 253865
Exp-run by: antoine
Update PyQt to 5.15.0, py-sip to 4.19.24 and qscintilla2 to 2.11.5
- Update PyQt to 5.15.0, py-sip to 4.19.24 and qscintilla2 to 2.11.5
- Use pypi for PYQT [1]
- Add devel/py-qt5-sip (Don't use it for now. It will be used in future updates
of PyQt with py-sip >= 5)
- Add missing py-qt5 ports: comms/py-qt5-sensors, devel/py-qt5-location,
devel/py-qt5-remoteobjects, net/py-qt5-networkauth
- Strip libs
- Refactor *_PATH and *_PORT parts
[1] RiverBankComputing doesn't offer links to download latest version of some
ports
PR: 247369
Reviewed by: tcberner
Differential Revision: https://reviews.freebsd.org/D25749
Exp-run by: antoine
Update py-sip to 4.19.21 and qscintilla2 to 2.11.4
- Update py-sip to 4.19.21
- Update qscintilla2 to 2.11.4
- Replace MASTER_SITE_RIVERBANK with https versions
- Replace QSCI2_DISTNAME to match with the new one
PR: 245308
Approved by: tcberner (mentor)
Exp-run by: antoine
New port: graphics/rapid-photo-downloader
Rapid Photo Downloader imports photos and videos from cameras, phones,
memory cards and other devices at high speed. It can be configured to
rename photos and videos with meaningful filenames you specify. It can
also back up photos and videos as they are downloaded. It downloads
from and backs up to multiple devices simultaneously.
WWW: http://www.damonlynch.net/rapid/
PR: 240601
Submitted by: m.ne@gmx.net
Reviewed by: koobs
