===> The following configuration options are available for synfigstudio-1.4.5_8:
DOCS=on: Build and/or install documentation
JACK=off: JACK audio server support
NLS=on: Native Language Support
===> Use 'make config' to modify these settings
*/*: Bump consumers after graphics/ImageMagick{6,7} update
ImageInfo and DrawInfo gained a member, GetImageInfo() and
GetDrawInfo() clear the new size on a caller-provided struct.
PR: 300074
With hat: ports-secteam
Sponsored by: Netzkommune GmbH
gnome.mk: rename gdkpixbuf2 to gdkpixbuf to prepare for port move
The GTK 1-based gdk-pixbuf has not existed for some time.
No functional or package changes.
accessibility/at-spi2-core: update to 2.46.0
What's new in at-spi2-core 2.46.0:
* Fix GetInterfaces documentation on org.a11y.atspi.Accessible
interface.
What's new in at-spi2-core 2.45.91:
* Send device event controller events using the same signature as other
events.
* Document the Accessible, Action, and Cache dbus interfaces.
* Fix license of atspi-gmain.c (#87).
What's new in at-spi2-core 2.45.90:
* xml: Add some documentation.
* xml: Fix event arguments.
(Only the first 15 lines of the commit message are shown above )
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner)
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
textproc/libxml2: bump all LIB_DEPENDS consumers
This is a separate commit to facilitate easier cherry-picking for
quarterly.
PR: 262853, 262940, 262877, 263126
Approved by: fluffy (mentor)
textproc/libxml2: bump all dependencies
This should make sure that all dependent ports will pick
up the new version commited with a13ec21cd733f67a9fc0dc00ab45268bdc236246
framework: Add new USES 'magick' for graphics/ImageMagick*
A new USES has been added to depend on ImageMagick.
USES=magick
adds a LIB_DEPENDS on graphics/ImageMagick${IMAGEMAGICK_DEFAULT}.
If a specific version is required, use for example
USES=magick:6 resp. USES=magick:7
If only a build, run or test is required, use for example
USES=magick:build resp. USES=magick:6,build,test
(Only the first 15 lines of the commit message are shown above )
INSTALLS_ICONS: retire the macro and rework the related dependencies
While here, make sure gtk-update-icon-cache is only on run dependency
where added as a dependency
Enforce gtk3 to depend on gtk-update-icon-cache (previously it was
inheriting the dependency)
audio/jack: Update to Jack2: 0.125.0 -> 1.9.16
Big thank you to Florian Walpen <dev@submerge.ch> and
Goran Mekić <meka@tilda.center> for working on Jack2.
PR: 251125
Submitted by: Florian Walpen <dev@submerge.ch> (original version)
multimedia/{py-,}mlt{-qt5,}: rename to multimedia/{py-,}mlt6{-qt5,}:
- To make it possible to easily import mlt-7 move the current port to
a versioned directory.
- Add Mk/Uses/mlt.mk to make it easily possible to depend on a given mlt
version:
USES=mlt:6
will get you a dependency on multimedia/mlt6, while
USES=mlt:7
will get you a dependency on the soon to be added multimedia/mlt7
- Switch the port to use cmake as a build system
- While here, provide some more options to make it possible to have
a leaner package if required
- Bump consumers after rename of the dependency
graphics/synfig*: re-categorize, hand-off MAINTAINER
Chris writes (in the PR mentioned below):
I need to use Synfig. It appears to be in the
wrong category (devel), should be graphics. As it is
an image manipulation application. I also see it's WAY
out of date.
This pr changes devel/synfig to graphics/synfig. As I
also seek to update this port and graphics/synfigstudio;
takes MAINTAINER.
apply the patch, massaging it to maintain INDEX &c. Hands off
maintainership (from ports@).
PR: 257030
Reported by: Chris Hutchinson
*: Bump PORTREVISION for openexr update
OpenEXR's patchlevel updated bumped the major version
of the OpenEXR library, hence bump PORTREVISION of all
ports that require OpenEXR.
*/*: Fix ENOTIME: return my ports to the pool
Reset maintainership of my ports to ports@FreeBSD.org so others can
step in to help where I haven't been able to find the time.
graphics/openexr: really commit v2.5.4 update.
Unfortunately, this was missed with the ilmbase update, and
causes yet another PORTREVISION bump on all dependent ports.
repeating ilmbase's commit log here:
"Patch release with various bug/sanitizer/security fixes, primarily related to
reading corrupted input files."
<https://github.com/AcademySoftwareFoundation/openexr/releases/tag/v2.5.4>
Cherry-pick upstream commit for GCC 11 compatibility:
<https://github.com/AcademySoftwareFoundation/openexr/commit/a40a6151c4e746eb8f93c7c06992d0ec11289fdc>
Since this changes the patchlevel of the solibs, bump PORTREVISION of dependent
ports just to be sure.
(graphics/py-openshadinglanguage is unaltered and .includes the revision bump
from .../openshadinglanguage.)
MFH: 2021Q1 (this requires discussion by ports-secteam@!)
Reported by: VVD (IRC, #bsdports)
graphics/ilmbase, graphics/openexr: PORTREVISION bump for users
ilmbase and openexr were updated to v2.5.3 and their shlibs changed
from *.25.0.1 to *.25.0.2.
This is a PORTREVISION bump to ports using ilmbase or openexr
to chase that change and trigger rebuild.
openexr/ilmbase update w/ shlib rename => PORTREVISION bumps of dependent ports
OpenEXR and ILMBASE updates to 2.5.2 rename the full shlib version
names from .0.0 to .0.1 => to be on the safe side, bump PORTREVISIONs.
Approved by: portmgr (blanket)
MFH: 2020Q3 (PORTREVISION bump after OpenEXR/ilmbase update)
Security: 714e6c35-c75b-11ea-aa29-d74973d1f9f3
Multiple ports: improve regex compliance
These changes largely fall into just two categories:
1. Need textproc/gsed for GNU extensions
2. Extraneous escapes that can go away
For #1, there's a further subdivision into those that require autoconf magic
and those that can get away with BINARY_ALIAS=sed=${LOCALBASE}/bin/gsed.
-CURRENT will soon gain GNU extensions, but these will take longer to get to
all supported releases; we must switch them to gsed to ensure we're actually
properly building them as intended.
For #2, I've fixed these as I can and we should upstream these fixes.
(Only the first 15 lines of the commit message are shown above )
graphics/ilmbase: graphics/openexr: update to upstream release 2.5.1
Upstream release notes:
* A patch release that corrects the SO version for the v2.5 release,
which missed getting bumped in v2.5.0.
* This release also fixes an improper failure in IlmImfTest
when running on ARMv7 and AAarch64.
Bump PORTREVISION of all port directly requiring ilmbase or openexr
that are not marked BROKEN (shlib/.so file version bump).
Test build of all port directly depending on ilmbase or openexr
succeeded in poudriere in a 12.1-RELEASE amd64 jail.
graphics/ilmbase: graphics/openexr: update to v2.5.0
ChangeLog:
- https://github.com/AcademySoftwareFoundation/openexr/releases/tag/v2.5.0
* Bump PORTREVISION of all consumers except py-openimageio (BROKEN).
* cad/PrusaSlicer:
LIB_DEPENDS: remove version from libHalf.so
BUILD_DEPENDS+=qt5-buildtools as package (needed on bare metal builds)
USE_GL+=gl
USES+=pkgconfig (needed to find libHalf)
graphics/ilmbase, graphics/openexr: upgrade to upstream v2.4.0
graphics/gstreamer1-plugins-openexr: switch from C++98 to C++11 to
match new OpenEXR headers and unbreak compilation.
Bump PORTREVISION of all ports depending directly on either, based
on assessing INDEX-12 (bump_portrevision.pl -l (shallow) used).
Release Notes:
https://github.com/AcademySoftwareFoundation/openexr/releases/tag/v2.4.0
The update was deliberately deferred until after 2020Q1, and should
not be MFH'd back to it.
devel/etc, devel/synfig, graphics/synfigstudio: Update to 1.2.2
- Changed port to use GitHub as MASTER_SITES (follow upstream)
- Use autoreconf to build configure script (not included in GH repo)
- Introduce patches to fix build with autoreconf
Changes this release:
https://www.synfig.org/2018/09/15/synfig-studio-1-2-2-released/
PR: 237707
Reported by: kunda <chitty_cloud@me.com>
Bump PORTREVISION for ports depending on the canonical version of GCC
as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3
to GCC 9.1 under most circumstances now after revision 507371.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.
PR: 238330
Bump PORTREVISION for ports depending on the canonical version of GCC
defined via Mk/bsd.default-versions.mk which has moved from GCC 7.4 t
GCC 8.2 under most circumstances.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, as a double check, everything INDEX-11 showed depending on lang/gcc7.
PR: 231590
Update ImageMagick to 6.9.10.14 [1]
* Add PKGNAMESUFFIX and rename the directory. This was done to show
that IM6 is not the "main" version. But still fully supported by upstream.
* Convert a number of options to optionhelpers.
* Add option for ISO/IEC 23008-12:2017 HEIF suport
* Add comment to pkg-descr explaining IM6's "legacy" tag.
* Add comment to the patch-config_policy.xml file why it still needed.
Please note that IM7 is not a drop in replacement due to library API and
command arguments changes. And as a result ports need to decide for themself
which version to use.
Chase these changes in all the ports that using IM6.
PR: 225102 (based on, only the version update) [1]
Submitted by: Pascal Christen <pascal.christen@hostpoint.ch>
Update ilmbase and openexr to 2.3.0, rename OpenEXR to openexr.
Release notes: <https://github.com/openexr/openexr/releases/tag/v2.3.0>
Adjust LIB_DEPENDS of all ports that require ilmbase or openexr to chase
the new lower-case spelling of the name, and to omit the version from the
library name to ease future maintenance.
Bump PORTREVISION of all ports that depend on ilmbase or openexr directly,
so that they all get rebuilt on upgrades.
Add patches to graphics/ampasCTL to keep it alive, with (a) ilmbase now
that its Iex::BaseExc class is no longer derived from std::string,
details were given upstream through https://github.com/ampas/CTL/issues/71
and (b) to unwind semicolon/;-lists in cmake that stem from openexr/
ilmbase pkg-config variables.
(Note ampasCTL is unmaintained as FreeBSD port, and upstream,
and I cannot run-time test it.)
Poudriere build tests on 11.2-RELEASE-p1 amd64 of ALL ports depending
directly or indirectly on ilmbase and/or openexr have passed without
regressions. Thus invoking due diligence, I believe I have done the
equivalent of an -exp run, and do not require approval for the dependency
chases to third-party ports.
Bump PORTREVISION for ports depending on the canonical version of GCC
in the ports tree (via Mk/bsd.default-versions.mk and lang/gcc) which
has now moved from GCC 6 to GCC 7 by default.
This includes ports
- featuring USE_GCC=yes or USE_GCC=any,
- featuring USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and those
- with USES=compiler specifying one of openmp, nestedfct, c11, c++0x,
c++11-lib, c++11-lang, c++14-lang, c++17-lang, or gcc-c++11-lib.
PR: 222542
Bump PORTREVISION for ports depending on the canonical version of GCC
(via Mk/bsd.default-versions.mk and lang/gcc) which has moved from
GCC 5.4 to GCC 6.4 under most circumstances.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c++11-lib, c++11-lang,
c++14-lang, c++0x, c11, or gcc-c++11-lib.
PR: 219275
Mark BROKEN: missing header
In file included from actions/activepointadd.cpp:34:
../../src/synfigapp/canvasinterface.h:34:10: fatal error: 'sigc++/object.h' file
not found
#include <sigc++/object.h>
Reported by: pkg-fallout
Part 1 of adding USE_GNOME=intltool to ports that require it.
The reason for this is that in the GNOME 3.16 update, USE_GNOME gtk20 and
gtk30 don't pull intltool in anymore.
PR: 201980
Exp-run by: antoine@
Make ports using libtool treat elftoolchain's strip the same as GNU strip
Any strip on any FreeBSD version should be able to handle stripping requested
by libtool
PR: 198611
Reviewed by: emaste
Exp-run: self
Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.
Part II, Bump PORTREVISIONs.
PR: 192025
Tested by: antoine (-exp runs)
Approved by: portmgr (implicit)
Upgrade OpenEXR and ilmbase to 2.2.0.
GCC 4.2 in FreeBSD 8.X/9.X base is now too old to compile OpenEXR, so
GCC-based systems will upgrade to the default ports compiler (GCC 4.7
currently.)
Add two patches to OpenEXR to permit building it in a live system with
the older OpenEXR version installed. Bug report filed to upstream Github
at https://github.com/openexr/openexr/issues/130
Couple OpenEXR more tightly to ilmbase and require its exact .so
version.
Add UPDATING note, and bump PORTREVISION of all dependent ports.
Proto-STAGE hugin-devel, and mark it IGNORE because hugin is newer.
Approved by: portmgr (implicit for bumping PORTREVISION on unstaged ports)
- Remove manual creation and removal of share/applications, as it's now in the
mtree (categories starting with [fgijk])
Approved by: portmgr (bdrewery)
