| Port details |
- unpaper Post-processing tool for scanned sheets of paper
- 7.0.0_3 graphics
 =6      7.0.0_3Version of this port present on the latest quarterly branch. - Maintainer: kai@FreeBSD.org
- Port Added: 2007-01-31 22:38:52
- Last Update: 2024-01-12 22:40:48
- Commit Hash: 9f8f710
- People watching this port, also watch:: tesseract-data, frei0r, vlc, sox, poppler-utils
- License: GPLv2
- WWW:
- https://www.flameeyes.eu/projects/unpaper
- Description:
- unpaper is a post-processing tool for scanned sheets of paper,
especially for book-pages scanned from previously created photocopies.
unpaper tries to remove dark edges, corrects the rotation ("deskew"),
and aligns the centering of pages.
  ¦  ¦  ¦  ¦ 
- Manual pages:
- FreshPorts has no man page information for this port.
- pkg-plist: as obtained via:
make generate-plist - Dependency lines:
-
- unpaper>0:graphics/unpaper
- To install the port:
- cd /usr/ports/graphics/unpaper/ && make install clean
- To add the package, run one of these commands:
- pkg install graphics/unpaper
- pkg install unpaper
NOTE: If this package has multiple flavors (see below), then use one of them instead of the name specified above.- PKGNAME: unpaper
- Flavors: there is no flavor information for this port.
- distinfo:
- TIMESTAMP = 1678808615
SHA256 (unpaper-7.0.0.tar.xz) = 2575fbbf26c22719d1cb882b59602c9900c7f747118ac130883f63419be46a80
SIZE (unpaper-7.0.0.tar.xz) = 4430572
Packages (timestamps in pop-ups are UTC):
- Dependencies
- NOTE: FreshPorts displays only information on required and default dependencies. Optional dependencies are not covered.
- Build dependencies:
-
- py39-sphinx>0 : textproc/py-sphinx@py39
- meson : devel/meson
- ninja : devel/ninja
- pkgconf>=1.3.0_1 : devel/pkgconf
- python3.9 : lang/python39
- Library dependencies:
-
- libavcodec.so : multimedia/ffmpeg
- libavformat.so : multimedia/ffmpeg
- libavutil.so : multimedia/ffmpeg
- This port is required by:
- for Run
-
- deskutils/py-paperless
- deskutils/py-paperless-ngx
- graphics/gscan2pdf
- textproc/pdfsandwich
- textproc/py-ocrmypdf
-
Deleted ports which required this port:
- * - deleted ports are only shown under the This port is required by section. It was harder to do for the Required section. Perhaps later...
Configuration Options:- No options to configure
- Options name:
- graphics_unpaper
- USES:
- meson pkgconfig python:build tar:xz
- FreshPorts was unable to extract/find any pkg message
- Master Sites:
|
| Commit History - (may be incomplete: for full details, see links to repositories near top of page) |
| Commit | Credits | Log message |
|---|
7.0.0_3
12 Jan 2024 22:40:48
 |
Muhammad Moinur Rahman (bofh) |
*/*: Sanitize MANPREFIX for meson ports
Approved by: portmgr |
7.0.0_2
27 Apr 2023 12:01:46
|
Daniel Engberg (diizzy) |
*/*: Bump all users of multimedia/ffmpeg*
...to make sure all picks up new version(s) |
7.0.0_1
25 Apr 2023 15:17:15
|
Christian Weisgerber (naddy) |
audio/opus: bump consumers after update to 1.4 |
7.0.0
17 Mar 2023 06:30:20
|
Kai Knoblich (kai)
Author: Daniel Engberg |
graphics/unpaper: Update to 7.0.0
Changelog:
* Tests now compare a golden file by counting the bytes that differ
between it and the result. This allows non-byte-perfect calculations
to be executed and still not fail the tests. This is required as fused
multiply-add instructions can increase precision and thus deviate from
the base C code, when using floating-point arithmetic.
* Build is now provided by Meson, replacing the Autotools based build
system introduced in 0.4, 10½ years ago.
* Compatibility expanded to ffmpeg-5 (and newer versions), which is the
current widely available release.
https://github.com/unpaper/unpaper/releases/tag/unpaper-7.0.0
PR: 270218 |
07 Sep 2022 21:58:51
|
Stefan Eßer (se) |
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner) |
6.1
07 Sep 2022 21:10:59
|
Stefan Eßer (se) |
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above  ) |
6.1
20 Jul 2022 14:22:04
|
Tobias C. Berner (tcberner) |
graphics: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* "Waitman Gobble" <uzimac@da3m0n8t3r.com>
* Aaron Dalton <aaron@FreeBSD.org>
* Abel Chow <ozsanh45vds001@sneakemail.com>
* Adam Weinberger <adamw@FreeBSD.org>
* Ade Lovett <ade@FreeBSD.org>
* Ade Lovett <ade@lovett.com>
* Akinori MUSHA aka knu <knu@idaemons.org>
* Aldis Berjoza <aldis@bsdroot.lv>
* Alex Hayward <xelah@xelah.com>
* Alex Ivasyuv <siegerstein@pochta.ru>
* Alex Samorukov <samm@os2.kiev.ua> (Only the first 15 lines of the commit message are shown above ) |
6.1
06 Apr 2021 14:31:07
|
Mathieu Arnold (mat) |
Remove # $FreeBSD$ from Makefiles. |
6.1
08 Sep 2019 12:13:41
 |
kai |
graphics/unpaper: Update to 6.1
* Add an additional patch that fixes the unpaper's usage for the
libav/ffmpeg API. [1]
* Remove the DOCS option as nearly all files are now in Markdown format and
the relevant info has been transferred into the unpaper(1) manpage.
* Take maintainership
Notable changes since 0.3:
* Use libav for both input and output of files, rather than custom code.
This adds support for many different input file formats outside of
PPM/PBM/PGM, as long as libav can redconduct them to a pixel format that
is implemented.
* Implementation of mathematically accurate interpolation, using cubic
algorithm by default.
* Options are now documented in the unpaper(1) man page, rather than in the
code.
https://github.com/Flameeyes/unpaper/blob/unpaper-6.1/NEWS
Obtained from: Debian [1] |
0.3
06 Feb 2016 23:20:05
|
amdmi3 |
- Add LICENSE
- Switch to options helpers |
0.3
20 Oct 2014 17:04:21
|
bapt |
Cleanup plist |
0.3
29 Jul 2014 15:51:02
|
wg |
graphics/unpaper: fix fetch and update WWW |
0.3
20 Feb 2014 08:44:05
|
ehaupt |
Support staging |
0.3
20 Sep 2013 18:35:46
|
bapt |
Add NO_STAGE all over the place in preparation for the staging support (cat:
graphics) |
0.3
03 Jul 2011 14:12:23
|
ohauer |
-remove MD5 |
0.3
21 Dec 2009 02:19:12
|
dougb |
For ports maintained by ports@FreeBSD.org, remove names and/or
e-mail addresses from the pkg-descr file that could reasonably
be mistaken for maintainer contact information in order to avoid
confusion on the part of users looking for support. As a pleasant
side effect this also avoids confusion and/or frustration for people
who are no longer maintaining those ports. |
0.3
07 Sep 2008 00:19:05
|
linimon |
Reset infofarmer due to maintainer-timeouts and no response to email.
Hat: portmgr |
0.3
01 Jan 2008 14:25:42
|
sat |
- Update to 0.3 |
0.2
21 Apr 2007 09:11:10
|
sat |
- Add mirrors to all my berlios-hosted ports
Prompted by: pointyhat via kris, fenner's survey |
0.2
31 Jan 2007 22:38:40
|
sat |
Add port graphics/unpaper:
unpaper is a post-processing tool for scanned sheets of paper,
especially for book-pages scanned from previously created photocopies.
unpaper tries to remove dark edges, corrects the rotation ("deskew"),
and aligns the centering of pages.
WWW: http://unpaper.berlios.de/
Author: Jens Gulden <unpaper@jensgulden.de> |
As an Amazon Associate I earn from qualifying purchases.