Remove expired ports without open PRs:
2016-07-04 security/openpgpsdk: Broken for more than 6 months
2016-07-04 security/radiusniff: Broken for more than 6 months
2016-07-04 security/pear-Auth_OpenID: Broken for more than 6 months
2016-07-04 security/sshit: Broken for more than 6 months
2016-07-04 security/ifd-slb_rf60: Broken for more than 6 months
2016-07-04 security/rainbowcrack: Broken for more than 6 months
2016-07-04 security/vlog: Broken for more than 6 months
2016-07-04 security/cryptstring: Broken for more than 6 months
2016-07-04 x11/libdnd: Broken for more than 6 months
2016-07-04 x11/xlupe: Broken for more than 6 months
2016-07-04 x11/xco: Broken for more than 6 months
2016-07-04 x11/xclick: Broken for more than 6 months
2016-07-04 devel/ocfpcsc: Broken for more than 6 months
2016-07-04 devel/dits: Broken for more than 6 months

Deprecate ports broken for more than 6 months

Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.

With hat:	portmgr
Sponsored by:	Absolight

Mark as broken: does not fetch

- Switch to options helpers
- Add empty directories to plist

Approved by:	portmgr blanket

Convert to USES=jpeg

Bump portrevision after png update

Change libpng15.so to libpng.so in LIB_DEPENDS to prepare the upgrade

Replace USES=libtool:oldver with USES=libtool or USES=libtool:keepla in
the 32 ports that still use it.  Bump PORTREVISION on their dependent
ports except the ones that depend on these:

audio/libogg
audio/libvorbis
devel/pcre
ftp/curl
graphics/jpeg
graphics/libart_lgpl
graphics/tiff
textproc/expat2
textproc/libxslt

In these cases the same trick as in the recent gettext update is used.

Cleanup plist

Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.

Part II, Bump PORTREVISIONs.

PR:		192025
Tested by:	antoine (-exp runs)
Approved by:	portmgr (implicit)

Rename all patches that contain '::' as a path separator, and use
'__' instead.

Stagify.

Approved by:	portmgr@

The FreeBSD x11@ and graphics team proudly presents
a zeising, kwm production, with help from dumbbell, bdrewery:

NEW XORG ON FREEBSD 9-STABLE AND 10-STABLE

This update switches over to use the new xorg stack by default on FreeBSD 9
and 10 stable, on osversions where vt(9) is available.
It is still possible to use the old stack by specifying WITHOUT_NEW_XORG in
/etc/make.conf .
FreeBSD 8-STABLE and released versions of FreeBSD still use
the old version.
A package repository with binary packages for new xorg will
be available soon.

This patch also contains updates of libxcb and related ports, pixman, as well

Add NO_STAGE all over the place in preparation for the staging support (cat:
graphics)

- Unbreak parallel (-jX) builds by calling submakes correctly
- Remove non-working CENKES from MASTER_SITES
- Use newly proposed LIB_DEPENDS syntax
- Convert to OptionsNG, wrap one overly long line, misc. cleanups

NB: v0.30pl10 is available from upstream.

Convert from USE_MOTIF to USES=motif
While here:
- Trim headers
- Convert some USE_GMAKE to USES=gmake

Switch from libglut to freeglut and retire libglut. Libglut hasn't been
developed in years and has been dropped from the MESA 8.0 distribution.
Freeglut is a rewrite of glut and is actively developed and is used by
many linux distributions instead of libglut.

Bump all ports that directly depend on libglut because of the shlib version
change.

There are some extra items in this patch.

*) Because freeglut doesn't have the same dependancies as libglut, some ports
	need extra dependencies added to USE_XORG to make them build.
*) Mark graphics/f90gl broken, f90gl depends on a header that is only shipped
	with libglut.
*) Remove option for libglut/freeglut selection in games/cake, only freeglut
	remains now.
*) While here fix a png related build issue games/vegastrike.

Thanks to miwi for running the exp-run.

Approved by:	portmgr (miwi)

Collaboration with:	zeising@
Obtained from:	xorg-dev staging area.

Fix typos in COMMENT

- update png to 1.5.10

- Update devel/sdl12 to 1.2.15
- Update audio/sdl_mixer to 1.2.15
- Update graphics/sdl_image to 1.2.12
- Update graphics/sdl_ttf to 2.0.11
- Update graphics/sdl_gfx to 2.0.23
- Update net/sdl_net to 1.2.8
- Bump PORTREVISIONs on ports that depend on one or more packages due to
ABI and shared library version changes
- Update Mk/bsd.sdl.mk accordingly for the new shared library versions

Tested by:      exp-run by pav

- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead

PR:             157936
Submitted by:   myself
Exp-runs by:    pav
Approved by:    pav

Bump PORTREVISION after open-mofit update

- Update to 0.30pl5
- Grant maintainership to submitter

PR:             ports/153823
Submitted by:   Stas Timokhin <devel@stasyan.com>
Feature safe:   yes

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

- update to jpeg-8

- update to jpeg7
Tested by:      pav on pointyhat

Mark BROKEN on 8.x: does not build.

- Update X.org ports to 7.4+ (few ports are more recent than the katamari).
- Bump PORTREVISION for all ports depending on libglut since the shlib
version number went from 4 to 3.
- Bump PORTREVISION for all ports depending on libXaw as libXaw.so.8 isn't
installed anymore.
- Couple of ports fixes (mostly missing xorg components added to USE_XORG).

- Update to 0.28pl14

PR:             127305
Submitted by:   "Beat Gätzi" <beat@chruetertee.ch>

Update to 0.28pl13

- Chase devel/sdl12 shlib version bump

- Update to 0.28pl12
- Add mirrors
- Clean up

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

 - Update devel/sdl12 to version 1.2.11. Now we employ stock SDL directory
   structure (i.e. include/SDL for includes and sdl-config for configuration
   binary)
 - Update graphics/sdl_ttf to version 2.0.8
 - Update graphics/sdl_image to version 1.2.5
 - Update audio/sdl_mixer to version 1.2.7
 - Update net/sdl_net to version 1.2.6
 - Update Mk/bsd.sdl.mk accordingly
 - Fix dependent ports to fit the new directory structure and avoid several
   API breakages
 - Bump up portrevisions for all dependent ports to allow them to be upgraded
   by portupgrade/portmaster etc tools

Approved by:    kris (portmgr), sem (mentor)

- Update master site and WWW URL.

Reported by:     fenner's distfile survey

- Update graphics/libglut to 6.4.1.
- Shared lib version and PORTREVISION bumb for all affected ports.

While I'm here:
- Remove USE_MESA knob where it was (35 ports).
  It marked as depricated for 2 years.

PR:             ports/90247
Submitted by:   Ermal Lu?i <eri--@albabsd.org>

- Add SHA256

At Kris's request, back out the MACHINE_ARCH spelling correction until
after 5.4-RELEASE.

Assist getting more ports working on AMD64 by obeying the
Ports Collection documentation and use 'ARCH' rather than 'MACHINE_ARCH'.

Update to version 0.28.11

PR:             ports/75625
Submitted by:   Ports Fury

Update to version 0.28.8

PR:             ports/75268
Submitted by:   Ports Fury

Update to version 0.28.7

PR:             ports/74949
Submitted by:   Ports Fury

Update to version 0.28.4

PR:             ports/74732
Submitted by:   Ports Fury

Update to version 0.28.1

PR:             ports/74244
Submitted by:   Ports Fury

Fix build with gcc 3.4

Chase library bump of libSDL-1.1 for all ports which were depending
on sdl12-1.2.5

Properly use SDL everywhere:
        USE_SDL=yes     -> USE_SDL=sdl  (good examles everywhere)
        WANT_SDL/HAVE_SDL instead of exists(localbase/lib/lib...)

See
http://www.freebsd.org/doc/en_US.ISO8859-1/books/porters-handbook/using-sdl.html
for more information on how to use USE_SDL, WANT_SDL and HAVE_SDL.

PR:             follow-ups of ports/55494, ports/61877
Submitted by:   Edwin Groothuis <edwin@mavetju.org>

SIZEify.

Use the CPIO macro defined in bsd.port.mk.

- Update to version 0.26.5

PR:             60465
Submitted by:   Ports Fury

- Update to version 0.26.1

PR:             59756
Submitted by:   Ports Fury

Update to 0.24.3

PR:             53284
Submitted by:   KATO Tsuguru <tkato@prontomail.com>

Update to 0.23.6

PR:             52478
Submitted by:   KATO Tsuguru <tkato@prontomail.com>

Update to 0.23.3.

PR:             52344
Submitted by:   Ports Fury

upgrade to 0.21.3

de-pkg-comment

Update to 0.19pl4

PR:             42039
Submitted by:   tkato@prontomail.com

PERL -> REINPLACE_CMD

PR:             39938
Submitted by:   Oliver Braun <obraun@informatik.unibw-muenchen.de>

add white_dune 0.19b31
Graphical VRML97 Editor and animation tool