graphics/xmedcon: Sanitize MANPREFIX

Approved by:    portmgr (blanket)

graphics/xmedcon: update the port to version 0.23.0

- Move USE_GNOME under the corresponding X11 option
- Drop unrelated %%-substitution from the pkg-plist

accessibility/at-spi2-core: update to 2.46.0

What's new in at-spi2-core 2.46.0:
* Fix GetInterfaces documentation on org.a11y.atspi.Accessible
  interface.

What's new in at-spi2-core 2.45.91:
* Send device event controller events using the same signature as other
  events.
* Document the Accessible, Action, and Cache dbus interfaces.
* Fix license of atspi-gmain.c (#87).

What's new in at-spi2-core 2.45.90:
* xml: Add some documentation.
* xml: Fix event arguments.

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

graphics: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  "Waitman Gobble" <uzimac@da3m0n8t3r.com>
  *  Aaron Dalton <aaron@FreeBSD.org>
  *  Abel Chow <ozsanh45vds001@sneakemail.com>
  *  Adam Weinberger <adamw@FreeBSD.org>
  *  Ade Lovett <ade@FreeBSD.org>
  *  Ade Lovett <ade@lovett.com>
  *  Akinori MUSHA aka knu <knu@idaemons.org>
  *  Aldis Berjoza <aldis@bsdroot.lv>
  *  Alex Hayward <xelah@xelah.com>
  *  Alex Ivasyuv <siegerstein@pochta.ru>
  *  Alex Samorukov <samm@os2.kiev.ua>

Remove # $FreeBSD$ from Makefiles.

graphics/xmedcon: update to 0.17.0

ChangeLog: https://xmedcon.sourceforge.io/Main/New

Submitted by:	portscout

graphics/xmedcon: Update to 0.16.3

Reviewed by:		0mp (mentor)
Approved by:		0mp (mentor)
Differential Revision:	https://reviews.freebsd.org/D28257

graphics/xmedcon: update to 0.16.1

While here:

* Add USES=gnome localbase and USE_GNOME=gtk20 to simplify flags
* Reorder some variables

ChangeLog: http://xmedcon.sourceforge.net//Main/New

* patch with several spelling corrections ; updating to recent libtools
* improved homebrew file
* allow reading InterFile dialects without "END OF INTERFILE"
* basic Siemens Interfile support

Reported by:	portscout

- Update to 0.15.0

PR:		229945
Submitted by:	ndowens.fbsd@yandex.com

Revision bump of all ports with USE_GL after consolidation of mesa-libs

Approved by:	swills (mentor)
Differential Revision:	https://reviews.freebsd.org/D10845

Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.

With hat:	portmgr
Sponsored by:	Absolight

- Update to 0.14.1
- Convert some bits to options helpers

PR:		205622
Submitted by:	jochen@jochen-neumeister.de

- Strip library

Bump portrevision after png update

Change libpng15.so to libpng.so in LIB_DEPENDS to prepare the upgrade

Cleanup plist

- Switch to USES=libtool, drop .la files

- Add staging support
- Use options helpers, subs

Add NO_STAGE all over the place in preparation for the staging support (cat:
graphics)

Add an explicit dependency on pkgconf

- Remove MAKE_JOBS_SAFE variable

Approved by:	portmgr (bdrewery)

- Update to 0.13.0

PR:		180517
Submitted by:	Ports Fury

- Update to version 0.12.0

Feature safe: yes

PR:		ports/174178
Submitted by:	KATO Tsuguru <tkato432@yahoo.com>

- Update to 0.11.1
- Remove LICENCE_FILE_* since they are in Templates/Licenses
- Mark MAKE_JOBS_SAFE
- Use bsd.port.options.mk only and remove uneeded WANT_GNOME
- Trim Makefile headers

PR:		ports/172023
Submitted by:	KATO Tsuguru <tkato432@yahoo.com>
Feature safe:	yes

Conver to new options framework

- update png to 1.5.10

- Update to version 0.11.0

PR:             164997
Submitted by:   Ports Fury

- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead

PR:             157936
Submitted by:   myself
Exp-runs by:    pav
Approved by:    pav

-remove MD5

Sync to new bsd.autotools.mk

- Update to 0.10.7.

PR:             ports/151551
Submitted by:   KATO Tsuguru <tkato432@yahoo.com>

Update to 0.10.6

PR:             ports/150672
Submitted by:   KATO Tsuguru <tkato432 at yahoo.com>

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

- update to jpeg-8

- Update to 0.10.5

PR:             138279
Submitted by:   Ports Fury

- Switch SourceForge ports to the new File Release System: categories starting
with G

-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.

It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.

With help:      marcus and kwm
Pointyhat-exp:  a few times by pav
Tested by:      pgollucci, "Romain Tartière" <romain@blogreen.org>, and
                a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by:    marcus
Approved by:    portmgr

- bump all port that indirectly depends on libjpeg and have not yet been bumped
or updated
Requested by:   edwin

Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)

- Update to 0.10.4

- Update to 0.10.3

PR:             121618
Submitted by:   Ports Fury

- Update to 0.10.2

PR:             119164
Submitted by:   KATO Tsuguru <tkato432@yahoo.com>

- Update to 0.9.10

PR:             117497
Submitted by:   KATO Tsuguru <tkato432@yahoo.com>

- Set --mandir and --infodir in CONFIGURE_ARGS if the configure script
  supports them.  This is determined by running ``configure --help'' in
  do-configure target and set the shell variable _LATE_CONFIGURE_ARGS
  which is then passed to CONFIGURE_ARGS.
- Remove --mandir and --infodir in ports' Makefile where applicable
  Few ports use REINPLACE_CMD to achieve the same effect, remove them too.
- Correct some manual pages location from PREFIX/man to MANPREFIX/man
- Define INFO_PATH where necessary
- Document that .info files are installed in a subdirectory relative to
  PREFIX/INFO_PATH and slightly change add-plist-info to use INFO_PATH and
  subdirectory detection.

PR:             ports/111470
Approved by:    portmgr
Discussed with: stas (Mk/*), gerald (info related stuffs)
Tested by:      pointyhat exp run

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

- Update to 0.9.9.4

- Update to 0.9.9.3

PR:             ports/103639
Submitted by:   KATO Tsuguru <tkato432 at yahoo.com>

- s,INSTALLS_SHLIB,USE_LDCONFIG,g
- these include dns/ editors/ emulators/ finance/
  games/ graphics/ maintained by ports@

PR:             ports/101916
Submitted by:   Gea-Suan Lin <gslin_AT_gslin dot org>

Update to 0.9.9.1

PR:             96215
Submitted by:   ports fury

- Update to 0.9.9.0

PR:             ports/94498
Submitted by:   KATO Tsuguru <tkato432@yahoo.com>

Conversion to a single libtool environment.

Approved by:    portmgr (kris)

Reset inactive maintainer (several timeouts).

Hat:            portmgr
Noticed by:     lawrance

SHA256ify

Approved by: krion@

Mass-conversion to the USE_AUTOTOOLS New World Order.  The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.

Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.

Preliminary documentation can be found at:
        http://people.FreeBSD.org/~ade/autotools.txt

which is in the process of being SGMLized before introduction into the
Porters Handbook.

Light blue touch-paper.  Run.

At Kris's request, back out the MACHINE_ARCH spelling correction until
after 5.4-RELEASE.

Assist getting more ports working on AMD64 by obeying the
Ports Collection documentation and use 'ARCH' rather than 'MACHINE_ARCH'.

Update to 0.9.8.4

PR:             ports/77654
Submitted by:   maintainer

Update to 0.9.8.2

PR:             ports/75586
Submitted by:   maintainer

- Update to 0.9.8.1

PR:             ports/74143
Submitted by:   Paul Everlund <tdv94ped@cs.umu.se> (maintainer)

Update to 0.9.7.3.

PR:             ports/71434
Submitted by:   Paul Everlund <tdv94ped at cs dot umu dot se> (maintainer)

- Update to 0.9.7.1
- Correct handling of OPTIONS

PR:             ports/68398
Submitted by:   Paul Everlund <tdv94ped@cs.umu.se> (maintainer)

Update to 0.9.6.

PR:             ports/66603
Submitted by:   Paul Everlund <tdv94ped@cs.umu.se> (maintainer)

- Update to version 0.9.4

PR:             ports/65455
Submitted by:   maintainer

- Update to version 0.9.3

PR:             ports/65034
Submitted by:   maintainer

Whoa there, boy, that's a mighty big commit y'all have there...

Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".

For ports-in-waiting:

        USE_LIBTOOL=YES         ->      USE_LIBTOOL_VER=13
        USE_AUTOCONF=YES        ->      USE_AUTOCONF_VER=213
        USE_AUTOMAKE=YES        ->      USE_AUTOMAKE_VER=14

Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.

- update to 0.9.1
- use OPTIONS

PR:             61876
Submitted by:   Paul Everlund <tdv94ped@cs.umu.se> (maintainer)

Update to 0.8.13.

PR:             ports/53400
Submitted by:   Paul Everlund <tdv94ped@cs.umu.se>

update to 0.8.12

PR:             52191
Submitted by:   maintainer

intainer Update] graphics/xmedcon 0.8.10 -> 0.8.11

        Update of graphics/xmedcon 0.8.10 -> 0.8.11.

PR:             ports/51525
Submitted by:   Paul Everlund <tdv94ped@cs.umu.se>

[Maintainer update] graphics/xmedcon 0.8.9 -> 0.8.10

        Update of graphics/xmedcon 0.8.9 to 0.8.10.

Remove USE_GNOMENG.

De-pkg-comment.

[Maintainer update]: graphics/xmedcon 0.8.8 -> 0.8.9

PR:             ports/47188
Submitted by:   Paul Everlund <su_paul@everlund.homeip.net>

[Port fix]: XMedcon have a missing file

This port upgrade was committed with a missing file.

PR:             ports/47014
Submitted by:   Paul Everlund <tdv94ped@cs.umu.se>

upgrade to 0.8.8

PR:             46147
Submitted by:   maintainer

Update xmedcon 0.8.1 -> 0.8.2

Submitted by:   tdv94ped@cs.umu.se (maintainer)
PR:             44165
Approved by:    pat

add xmedcon 0.8.1
A medical image conversion utility and library

PR:             43448
Submitted by:   Paul Everlund <tdv94ped@cs.umu.se>