YafaRay is a free open-source montecarlo raytracing engine released under the
LGPL 2.1 license. Raytracing is a rendering technique for generating realistic
images by tracing the path of light through a 3D scene. A render engine consists
of a specialised computer program that interacts with a host 3D application to
provide specific raytracing capabilities "on demand". The YafaRay engine can be
used in the following 3D applications: Blender, Edificius, pCon-planner and
Wings 3D.
===> The following configuration options are available for yafaray-3.5.1_33:
DOCS=on: Build and/or install documentation
QT=off: Enable Qt Gui build
===> Use 'make config' to modify these settings
Mk/Uses: always use colon for build/run suffix
Most USES use a colon for build/run(/test) suffixes. Change kde.mk,
qt.mk and pyqt.mk to do the same, and update all ports using that.
Document in CHANGES.
PR: 266034
Exp-run by: antoine
Approved by: tcberner (mentor)
Differential Revision: https://reviews.freebsd.org/D36349
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner)
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
textproc/libxml2: bump all LIB_DEPENDS consumers
This is a separate commit to facilitate easier cherry-picking for
quarterly.
PR: 262853, 262940, 262877, 263126
Approved by: fluffy (mentor)
textproc/libxml2: bump all dependencies
This should make sure that all dependent ports will pick
up the new version commited with a13ec21cd733f67a9fc0dc00ab45268bdc236246
*: Bump PORTREVISION for openexr update
OpenEXR's patchlevel updated bumped the major version
of the OpenEXR library, hence bump PORTREVISION of all
ports that require OpenEXR.
graphics/opencv: update to 4.5.1 -- and make port more easily maintainable
This is a major upgrade from 3.x to 4.x.
Changelog from versions 3.4.1--4.5.1 can be found here:
https://github.com/opencv/opencv/wiki/ChangeLog
Note: this has explicitely not been added as a new graphics/opencv4 port, but
replaces the
previous graphics/opencv[3] port. Again, to improve maintainability by not
giving ports
the option to pick the "wrong one" - this leads however to some abandoned
ports being
broken.
The port has been greatly simplified:
* graphics/opencv-core which existed to enable ffmpeg to depend on opencv,
and vice versa
has been removed. ffmpeg no longer can depend on opencv.
(Only the first 15 lines of the commit message are shown above )
graphics/openexr: really commit v2.5.4 update.
Unfortunately, this was missed with the ilmbase update, and
causes yet another PORTREVISION bump on all dependent ports.
repeating ilmbase's commit log here:
"Patch release with various bug/sanitizer/security fixes, primarily related to
reading corrupted input files."
<https://github.com/AcademySoftwareFoundation/openexr/releases/tag/v2.5.4>
Cherry-pick upstream commit for GCC 11 compatibility:
<https://github.com/AcademySoftwareFoundation/openexr/commit/a40a6151c4e746eb8f93c7c06992d0ec11289fdc>
Since this changes the patchlevel of the solibs, bump PORTREVISION of dependent
ports just to be sure.
(graphics/py-openshadinglanguage is unaltered and .includes the revision bump
from .../openshadinglanguage.)
MFH: 2021Q1 (this requires discussion by ports-secteam@!)
Reported by: VVD (IRC, #bsdports)
graphics/ilmbase, graphics/openexr: PORTREVISION bump for users
ilmbase and openexr were updated to v2.5.3 and their shlibs changed
from *.25.0.1 to *.25.0.2.
This is a PORTREVISION bump to ports using ilmbase or openexr
to chase that change and trigger rebuild.
openexr/ilmbase update w/ shlib rename => PORTREVISION bumps of dependent ports
OpenEXR and ILMBASE updates to 2.5.2 rename the full shlib version
names from .0.0 to .0.1 => to be on the safe side, bump PORTREVISIONs.
Approved by: portmgr (blanket)
MFH: 2020Q3 (PORTREVISION bump after OpenEXR/ilmbase update)
Security: 714e6c35-c75b-11ea-aa29-d74973d1f9f3
graphics/ilmbase: graphics/openexr: update to upstream release 2.5.1
Upstream release notes:
* A patch release that corrects the SO version for the v2.5 release,
which missed getting bumped in v2.5.0.
* This release also fixes an improper failure in IlmImfTest
when running on ARMv7 and AAarch64.
Bump PORTREVISION of all port directly requiring ilmbase or openexr
that are not marked BROKEN (shlib/.so file version bump).
Test build of all port directly depending on ilmbase or openexr
succeeded in poudriere in a 12.1-RELEASE amd64 jail.
graphics/ilmbase: graphics/openexr: update to v2.5.0
ChangeLog:
- https://github.com/AcademySoftwareFoundation/openexr/releases/tag/v2.5.0
* Bump PORTREVISION of all consumers except py-openimageio (BROKEN).
* cad/PrusaSlicer:
LIB_DEPENDS: remove version from libHalf.so
BUILD_DEPENDS+=qt5-buildtools as package (needed on bare metal builds)
USE_GL+=gl
USES+=pkgconfig (needed to find libHalf)
graphics/ilmbase, graphics/openexr: upgrade to upstream v2.4.0
graphics/gstreamer1-plugins-openexr: switch from C++98 to C++11 to
match new OpenEXR headers and unbreak compilation.
Bump PORTREVISION of all ports depending directly on either, based
on assessing INDEX-12 (bump_portrevision.pl -l (shallow) used).
Release Notes:
https://github.com/AcademySoftwareFoundation/openexr/releases/tag/v2.4.0
The update was deliberately deferred until after 2020Q1, and should
not be MFH'd back to it.
Change cmake default behaviour to outsource.
Ports that build out of source now simply can use "USES=cmake"
instead of "USES=cmake:outsource". Ports that fail to build
out of source now need to specify "USES=cmake:insource".
I tried to only set insource where explictely needed.
PR: 232038
Exp-run by: antoine
Mark QT4 ports/functionality for removal on 2019-03-15
While here, chase some KDE4 ports and functionality, these are scheduled for
removal on 2018-12-31. Change the default option/flavor to QT5 where applicable
or use alternative toolkits like GTK.
Submitted by: tcberner
Reviewed by: adridg, jhale, rene, tcberner
Approved by: portmgr (implicit, flavor hook)
Differential Revision: https://reviews.freebsd.org/D17741
Update ilmbase and openexr to 2.3.0, rename OpenEXR to openexr.
Release notes: <https://github.com/openexr/openexr/releases/tag/v2.3.0>
Adjust LIB_DEPENDS of all ports that require ilmbase or openexr to chase
the new lower-case spelling of the name, and to omit the version from the
library name to ease future maintenance.
Bump PORTREVISION of all ports that depend on ilmbase or openexr directly,
so that they all get rebuilt on upgrades.
Add patches to graphics/ampasCTL to keep it alive, with (a) ilmbase now
that its Iex::BaseExc class is no longer derived from std::string,
details were given upstream through https://github.com/ampas/CTL/issues/71
and (b) to unwind semicolon/;-lists in cmake that stem from openexr/
ilmbase pkg-config variables.
(Note ampasCTL is unmaintained as FreeBSD port, and upstream,
and I cannot run-time test it.)
Poudriere build tests on 11.2-RELEASE-p1 amd64 of ALL ports depending
directly or indirectly on ilmbase and/or openexr have passed without
regressions. Thus invoking due diligence, I believe I have done the
equivalent of an -exp run, and do not require approval for the dependency
chases to third-party ports.