graphics/zbar: Moved man to share/man

Approved by:    portmgr (blanket)

*/*: Bump consumers of x11-toolkits/gtk30

New version of gtk3 in tree

*/*: Bump jpeg-turbo users treewide

New major version 3.0.0

Mk/Uses/magick.mk: Bump all consumers

Bump all consumers of ImageMagick ports after flavorizing them.

Approved by:	tcberner (mentor, implicit)

graphics/zbar: fix to allow building without NLS

PR:		269962
Reported by:	andrew.fengler@scaleengine.com
Approved by:	dev2@heesakkers.info (maintainer)

Mk/Uses: always use colon for build/run suffix

Most USES use a colon for build/run(/test) suffixes. Change kde.mk,
qt.mk and pyqt.mk to do the same, and update all ports using that.

Document in CHANGES.

PR:			266034
Exp-run by:		antoine
Approved by:		tcberner (mentor)
Differential Revision:	https://reviews.freebsd.org/D36349

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

graphics: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  "Waitman Gobble" <uzimac@da3m0n8t3r.com>
  *  Aaron Dalton <aaron@FreeBSD.org>
  *  Abel Chow <ozsanh45vds001@sneakemail.com>
  *  Adam Weinberger <adamw@FreeBSD.org>
  *  Ade Lovett <ade@FreeBSD.org>
  *  Ade Lovett <ade@lovett.com>
  *  Akinori MUSHA aka knu <knu@idaemons.org>
  *  Aldis Berjoza <aldis@bsdroot.lv>
  *  Alex Hayward <xelah@xelah.com>
  *  Alex Ivasyuv <siegerstein@pochta.ru>
  *  Alex Samorukov <samm@os2.kiev.ua>

framework: Add new USES 'magick' for graphics/ImageMagick*

A new USES has been added to depend on ImageMagick.

	USES=magick

adds a LIB_DEPENDS on graphics/ImageMagick${IMAGEMAGICK_DEFAULT}.

If a specific version is required, use for example

	USES=magick:6        resp.     USES=magick:7

If only a build, run or test is required, use for example

	USES=magick:build    resp.     USES=magick:6,build,test

Remove # $FreeBSD$ from Makefiles.

graphics/zbar:	unbreak QT5 build (missed dependency on qt5-buildtools)

Reported by:	poudriere failure
Approved by:	portmgr (fix build)

graphics/zbar: update to 0.23.90

ChangeLog: https://github.com/mchehab/zbar/releases/tag/0.23.90

PR:	253743
Submitted by:	vvd@unislabs.com
Approved by:	dev2@heesakkers.info (maintainer, timemout > 1 week)

graphics/zbar: use IMAGEMAGICK_DEFAULT

- switch to USES=localbase

PR:		253444
Submitted by:	VVD <vvd@unislabs.com>
Approved by:	Oliver Heesakker s<dev2@heesakkers.info> (maintainer)

Remove optional dependency on pygtk2

With hat:	portmgr

Add USES={gl,gnome,mate,sdl,xorg} missed in the last round

Sprinkle more USES=xorg

graphics/zbar: remove QT4 option (Qt4 deprecation)

Approved by:	portmgr (implicit)

graphics/zbar: make the ImageMagick an option, 7 the default

PR:		221391
Reported by:	vvd@unislabs.com
Approved by:	dev2@heesakkers.info (maintainer timeout)

graphics/zbar: work with ImageMagick-7 instead of -6

PR:		221391
Submitted by:	Mikhail T. <mi@ALDAN.algebra.com>
Approved by:	Oliver Heesakkers <dev2@heesakkers.info> (maintainer)

Mark QT4 ports/functionality for removal on 2019-03-15

While here, chase some KDE4 ports and functionality, these are scheduled for
removal on 2018-12-31. Change the default option/flavor to QT5 where applicable
or use alternative toolkits like GTK.

Submitted by:	tcberner
Reviewed by:	adridg, jhale, rene, tcberner
Approved by:	portmgr (implicit, flavor hook)
Differential Revision:	https://reviews.freebsd.org/D17741

Update ImageMagick to 6.9.10.14 [1]

* Add PKGNAMESUFFIX and rename the directory. This was done to show
  that IM6 is not the "main" version. But still fully supported by upstream.
* Convert a number of options to optionhelpers.
* Add option for ISO/IEC 23008-12:2017 HEIF suport
* Add comment to pkg-descr explaining IM6's "legacy" tag.
* Add comment to the patch-config_policy.xml file why it still needed.

Please note that IM7 is not a drop in replacement due to library API and
command arguments changes. And as a result ports need to decide for themself
which version to use.

Chase these changes in all the ports that using IM6.

PR:		225102 (based on, only the version update) [1]
Submitted by:	Pascal Christen <pascal.christen@hostpoint.ch>

Bump PORTREVISION to chase update of multimedia/v4l_compat and libv4l

Replace bsd.qt.mk by Uses/qt.mk and Uses/qt-dist.mk

From now on, ports that depend on Qt4 will have to set
	USES=		qt:4
	USE_QT=		foo bar
ports depending on Qt5 will use
	USES=		qt:5
	USE_QT=		foo bar

PR:		229225
Exp-run by:	antoine
Reviewed by:	mat
Approved by:	portmgr (antoine)
Differential Revision:	-https://reviews.freebsd.org/D15540

Reduce dependency on the python2 metaport

PR:		225752
Submitted by:	Yasuhiro KIMURA

ImageMagick to 6.9.9-15.

* Disable FPX (FlashPix) support by default. This image format is really
  rare these days coupled with that there are known CVE's in libfpx and
  it doesn't seem to be maintained these days. It doesn't make sense to
  keep it enabled by default anymore. [1]
* Add new option for RAW support
* Fix portscout macro to only show 6.9.x versions

Bump other ports for the shared library bumps in IM 6.

PR:		222309 [1]
Submitted by:	Anton Yuzhaninov <citrin+pr@citrin.ru> [1]

Chase ImageMagick shlib bump

Use USES=pathfix where applicable.

PR:		213195
Submitted by:	mat
Exp-run by:	antoine
Sponsored by:	Absolight
Differential Revision:	https://reviews.freebsd.org/D8093

Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.

With hat:	portmgr
Sponsored by:	Absolight

- Switch to options helpers
- While here, add some NO_ARCHes

Approved by:	portmgr blanket

By default libtool replaces -export-symbols <file> with -retain-symbols-file
<file> on ELF systems, but this doesn't really do what -export-symbols is
meant to do.  On GNU ELF systems it converts <file> to a simple version
script first and then uses -version-script instead of -retain-symbols-file.
Let USES=libtool patch libtool scripts to do this on all systems with GNU
ld(1).

Bump PORTREVISION on all ports where the build log contains -export-symbols.

audio/calf: This port builds a module that now exports only one function,
but it also builds a number of executables that link to this module and
expect to see other functions.  Because it's already a bit dodgy to link to
a module (libtool warns about this) let the module continue to export only
one function and instead build an ordinary library from the same source that
the executables can link to.  Fix a number of other issues in the same

Convert to USES=jpeg

graphics category: Remove $PTHREAD_LIBS

graphics/zbar didn't pass check-plist (pre-existing), fixed.

approved by:	PTHREAD blanket

Update ImageMagick to 6.9.0-10.

- USES=pkgconfig:both since the *-config scripts are wrappers around pkg-config.
- Don't require ghostscript for the freetype2 option.
- Actualy remove the pkg-help file with is obsolete since r377347 when the
  library names where normalized.

Due to libMagick++-6.so bump, chase depend ports.

Update ImageMagick to 6.9.0.4.

- Normalize the ImageMagick library name so it stays the same regardless of
  what the 16-bit and HDRI option are set to [1]. Teach cmake to look for
  the new name. Bump ports that link to the libraries due to this.
- As a result do away with the "HALFSUPPORTED" option block, and list
  16-bit and HDRI with the other options.
- ImageMagick ships a basic SVG plugin when not using librsvg2 for SVG
  support. This basic SVG plugin needs libxml2 to work [2]. Make libxml2
  a mandatory dependency (instead of only when the SVG option was selected).
- Don't touch .keep files in the modules directory, there files there so
  it useless.

PR:		194949 [1]
PR:		195227 [2]
Requested by:	many [1]
Submitted by:	software-freebsd@interfasys.ch [2]

- Convert <OPTION>_USE= PYTHON... to <OPTION>_USES= python...

With hat:	python@

Remove * from LIB_DEPENDS lines and specify the default library name
for ImageMagick. Using '*' it is unsupported and potention bugs here.

Cleanup plist

Use OPTIONS helpers.

Add DOCS to OPTIONS_DEFINE to ports that check for PORT_OPTIONS:MDOCS.

- Fix build/staging of graphics/zbar for all permutations of OPTIONS
  - CPPFLAGS
  - Get rid of MAN1
- Fix pkg-plist
- Introduce USES=libtool
- Bump PORTREVISION including dependent ports that need rebuild

PR:		187923
Submitted by:	kamikaze@bsdforen.de
Reviewed by:	Oliver Heesakkers <dev2@heesakkers.info> (maintainer)
Approved by:	maintainer, mentors (implicit)

Stagify
use new lib_depend syntax.
replace empty() with !

Approved by:	portmgr (blanket)

Update to 6.8.9-3 [1][3].

Use USES=compiler:openmp for the OPENMP option[2]
Ditch the use of perl for patching etc [4] and silence perl threaded check [6]
-delay option spurious message should be fixed [5]

JASPER option was replace by JPEG2000 for JP2k support.
Put 16BIT_PIXEL and HDRI option separate option block. These options change
  the library name, so the user needs to take this into consideration.
Use new LIB_DEPENDS syntax.
Use @sample for config files.
Sprinkle some USES=pkgconfig for some ports, since we don't pull it in
  anymore at run-time.

PR:		185462 [1]

The FreeBSD x11@ and graphics team proudly presents
a zeising, kwm production, with help from dumbbell, bdrewery:

NEW XORG ON FREEBSD 9-STABLE AND 10-STABLE

This update switches over to use the new xorg stack by default on FreeBSD 9
and 10 stable, on osversions where vt(9) is available.
It is still possible to use the old stack by specifying WITHOUT_NEW_XORG in
/etc/make.conf .
FreeBSD 8-STABLE and released versions of FreeBSD still use
the old version.
A package repository with binary packages for new xorg will
be available soon.

This patch also contains updates of libxcb and related ports, pixman, as well

Python cleanup:
- USE_PYTHON* = 2.X -> USE_PYTHON* = 2
- USE_PYTHON* = 2.X+ -> USE_PYTHON* = yes
Reviewed by:	python (mva, rm)
Approved by:	portmgr-lurkers (mat)

graphics/zbar: Unbreak on F10 and DragonFly

PR:		ports/183572
Submitted by:	marino
Approved by:	Oliver Heesakkers (maintainer, modified)

Add NO_STAGE all over the place in preparation for the staging support (cat:
graphics)

Add an explicit dependency on pkgconf

Do not try to remove directories not created by the port

The FreeBSD x11 team proudly presents
an zeising, kwm, miwi, bapt, eadler production:

Xorg 7.7

Starring:
xserver 1.12.4 (new xorg only)
Mesa 8.0.4, including libGL, libGLU and dri (new xorg only)
libX11 1.5.0
libxcb 1.9
libdrm 2.4.42 (new xorg only)
freeglut 2.8.1
Also starring:
Updates to drivers and other libraries and utilities

- Convert USE_ICONV=yes to USES=iconv
- Change USE_GNOME=pkgconfig|gnomehack to USES=pathfix|pkgconfig while here

Reviewed by:	zeising

- Chase graphics/ImageMagick update
- Trim header

- Convert Makefile headers to new style
- Convert to new options framework
- Remove ABI version numbers from LIB_DEPENDS

PR:	ports/172397
Submitted by:	Oliver Heesakkers <dev2@heesakkers.info> (maintainer)

- Convert USE_QT_VER=4 and QT_COMPONETS to USE_QT4

Review by:      bapt, David Naylor (kde team)

- update png to 1.5.10

Fix LIBDEPENDS != LIB_DEPENDS

Submitted by:   eadler

Update ImageMagick to 6.7.2-10 (shlib bumped to .5)

- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead

PR:             157936
Submitted by:   myself
Exp-runs by:    pav
Approved by:    pav

- fix plist [1]
- restrict python versions to 2.5-2.7 [1]
- add x11-toolkits/py-gtk2 build/run dep for WITH_PYTHON [2]
- add devel/qt4-moc build dep for WITH_QT4 [2]

PR:             ports/160182
Submitted by:   [1] Oliver Heesakkers <dev2@heesakkers.info> (maintainer)
                [2] myself
Approved by:    miwi, wen (mentors implicit)

Remove license clause from pkg-descr.

Notified by:    ehaupt
Approved by:    ehaupt (mentor)

ZBar is an open source software suite for reading bar codes from various
sources, such as video streams, image files and raw intensity sensors. It
supports many popular symbologies (types of bar codes) including EAN-13/UPC-A,
UPC-E, EAN-8, Code 128, Code 39, Interleaved 2 of 5 and QR Code.

PR:             ports/152708
Submitted by:   Oliver Heesakkers <dev2 at heesakkers.info>
pproved by:     ehaupt (mentor)