japanese: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  ABURAYER Rewsirow <pcs51674@asciinet.or.jp>
  *  Aaron Dalton <aaron@FreeBSD.org>
  *  Akinori MUSHA aka knu <knu@idaemons.org>
  *  Akito FUJITA <fujita@zoo.ncl.omron.co.jp>
  *  Andrew Pantyukhin <infofarmer@FreeBSD.org>
  *  Daichi GOTO <daichi@FreeBSD.org>
  *  Daisuke Kawahara <kawahara@pine.kuee.kyoto-u.ac.jp>
  *  David O'Brien (obrien@cs.ucdavis.edu)
  *  Eiji-usagi-MATSUmoto <usagi@ruby.club.or.jp>
  *  FUJISHIMA Satsuki <sf@FreeBSD.org>
  *  Fumihiko Kimura <jfkimura@yahoo.co.jp>

japanese/eb: Add patch to fix buffer overrun in eb/multiplex.c

While I'm here,

* Pet portlint and portclippy
* Tidy up Makefile with portfmt

Reported by:	Kazuhiro Ito
Obtained from:	edict ML <edict@ring.gr.jp>
MFH:		2022Q2
Security:	17a30a24-c579-11ec-bbbd-0800270512f4

*/*: Update MAINTAINER address of my ports to that of FreeBSD.org

Approved by:	meta (mentor)
Differential Revision:	https://reviews.freebsd.org/D32170

Remove # $FreeBSD$ from Makefiles.

Add LICENSE_FILE

- Pet portlint: move DIST_SUBDIR upward
- Remove outdated WWW from pkg-descr

PR:		222297
Submitted by:	Yasuhiro KIMURA <yasu@utahime.org> (maintainer)

${RM} already has -f.

PR:		213570
Submitted by:	mat
Exp-run by:	antoine
Sponsored by:	Absolight

Remove iconv(), iconv_open() and iconv_close() symbols from libiconv.

These were FreeBSD specific aliases for libiconv(), libiconv_open() and
libiconv_close() that are now also provided by libc which complicates
writing configure tests that work correctly when both libc iconv and
libiconv are available.

Also, because the libiconv iconv.h header redefines iconv* to libiconv*
correct use of the header implies that the aliases aren't used.

The following ports needed fixes because there was something wrong with
the way they tried to detect or use iconv:

audio/deadbeef: Remove LIBICONV_PLUG from a source file.  It's a
compile-time option and should not be set in source code.

japanese/eb: replace USE_AUTOTOOLS with USES=autoreconf

PR:		196792
Submitted by:	maintainer (Yasuhiro KIMURA)

Close out a bunch of PRs that only remove @dirrm

PR:		194331, 194332
PR:		194365, 194366, 194369, 194371, 194374

japanese/eb: Always set USES=iconv, move to USES+= libtool

PR:		188218
Submitted by:	maintainer (Yasuhiro KIMURA)

- Strip shared library [1]
- Convert 'USE_BZIP2' to 'USES=tar.bzip2' [1]
- Make ${PORTDOCS} always install [1]
- Use options subs, helpers
- Define perl path in CONFIGURE_ENV so that
  port sets correct shebangs

PR:		ports/187828 [1]
Submitted by:	maintainer

- Update License

PR:		185679
Submitted by:	maintainer

Convert to STAGEDIR

PR:		ports/182390
Submitted by:	Yasuhiro KIMURA (maintainer)

Add NO_STAGE all over the place in preparation for the staging support (cat:
japanese)

. add iconv to USES;
. switch LOCALBASE to ICONV_PREFIX for iconv-includes and iconv-libraries.

Approved by:	portmgr (bapt, implicit)

japanese/eb: Make gettext dependency a condition of NLS

PORTREVISION bumped to reset dependencies for folks that don't use NLS.

PR:		181205
Submitted by:	az
Reviewed by:	jgh, marino
Approved by:	bapt/culot (mentors, implicit)

- Conver to new perl5 framework.
- Remove duplication of 'USES=gettext'.

PR:		ports/181205
Submitted by:	Yasuhiro KIMURA <yasu@utahime.org> (maintainer)

- Convert USE_GETTEXT to USES (part 3)

Approved by:	portmgr (bapt)

- add created by to header
- adopt optionsNG
- add LICENSE
- while here use copytree_share in favor of cp (appoved by maintainer)

PR:		175193
Submitted by:	maintainer, yasu@utahime.org

- update japanese/eb to 4.4.3
- add support for NOPORTDOCS and WITHOUT_NLS
- bump PORTREVISION for dependent ports:
  - japanese/eblook
  - japanese/ebview
  - japanese/ebview-gtk2
  - japanese/ebnetd

while here, common changes:
- strip Makefile headers
- remove shlib versions from dependent ports
- remove deprecated attributions from pkg-descr
- whitespace fixes to pkg-descr

PR:		167175
Submitted by:	Muhammad Moinur Rahman <5u623l20 at gmail dot com> (original
patch)
Submitted by:	Yasuhiro KIMURA <yasu at utahime dot org> (maintainer, final
patch)

Fix typos in COMMENT

Approved by:	portmgr@ (implicit)

The vast majority of pkg-descr files had the following format when they
had both lines:

Author: ...
WWW: ....

So standardize on that, and move them to the end of the file when necessary.

Also fix some more whitespace, and remove more "signature tags" of varying
forms, like -- name, etc.

s/AUTHOR/Author/

A few other various formatting issues

- Get Rid MD5 support

With hat:       portmgr (myself)

Sync to new bsd.autotools.mk

Bounce PORTREVISION for gettext-related ports.  Have fun, ya'll.

- Update to 4.4.2

PR:             ports/142901
Submitted by:   Yasuhiro KIMURA <yasu@utahime.org>

-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.

It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.

With help:      marcus and kwm
Pointyhat-exp:  a few times by pav
Tested by:      pgollucci, "Romain Tartière" <romain@blogreen.org>, and
                a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by:    marcus
Approved by:    portmgr

o Update to 4.4.1.
o Bump shlib version.
o Bump PORTREVISION of ports depending on, accordingly.

PR:             ports/136298
Submitted by:   Yasuhiro KIMURA  yasu utahime org

- Update to 4.3.4

PR:             130372
Submitted by:   Yasuhiro KIMURA <yasu at utahime dot org> (maintainer)

Update CONFIGURE_ARGS for how we pass CONFIGURE_TARGET to configure script.
Specifically, newer autoconf (> 2.13) has different semantic of the
configure target. In short, one should use --build=CONFIGURE_TARGET
instead of CONFIGURE_TARGET directly. Otherwise, you will get a warning
and the old semantic may be removed in later autoconf releases.

To workaround this issue, many ports hack the CONFIGURE_TARGET variable
so that it contains the ``--build='' prefix.

To solve this issue, under the fact that some ports still have
configure script generated by the old autoconf, we use runtime detection
in the do-configure target so that the proper argument can be used.

Changes to Mk/*:
 - Add runtime detection magic in bsd.port.mk

Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)

Update to 4.3.2.

PR:             ports/120292
Submitted by:   KIMURA Yasuhiro <yasu@utahime.org> (maintainer)

Update to 4.3.1.

PR:             ports/119665
Submitted by:   KIMURA Yasuhiro  yasu at utahime org (maintainer)

- No longer broken on ia64

PR:             ports/113794
Submitted by:   KIMURA Yasuhiro <yasu@utahime.org> (maintainer)

Use libtool port instead of included version to avoid objformat a.out botch

- Update to 4.3

PR:             ports/106220
Submitted by:   KIMURA Yasuhiro <yasu@utahime.org> (maintainer)

- Remove appendix/{LIST,LIST-ja} which have disappeared from MASTER_SITES.
- Bump portrevision.

PR:             ports/97553
Submitted by:   KIMURA Yasuhiro <yasu@utahime.org> (maintainer)
Approved by:    mnag (mentor)

Conversion to a single libtool environment.

Approved by:    portmgr (kris)

[PATCH] japanese/{eb,ebnetd}: Take over maitainership

        I have sent PRs of these ports several times, but there was
        no response from maintainer and PRs were always commited
        with timeout. So I will take over maintainershilp now.

PR:             ports/90713
Submitted by:   KIMURA Yasuhiro <yasu@utahime.org>
Approved by:    maintainer timeout

Update to 4.2.2

PR:             ports/89619
Submitted by:   KIMURA Yasuhiro <yasu@utahime.org>
Approved by:    takamune2004@yahoo.co.jp (maintainer, timeout 14 days)

Mass-conversion to the USE_AUTOTOOLS New World Order.  The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.

Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.

Preliminary documentation can be found at:
        http://people.FreeBSD.org/~ade/autotools.txt

which is in the process of being SGMLized before introduction into the
Porters Handbook.

Light blue touch-paper.  Run.

Apply official patch

PR:             86913
Submitted by:   KIMURA Yasuhiro <yasu@utahime.org>
Approved by:    takamune2004@yahoo.co.jp (maintainer timeout, 19 days)

Update to 4.2.1.

PR:             ports/85140
Submitted by:   KIMURA Yasuhiro <yasu@utahime.org>

o Update to 4.2. [1]
o Fix minor bug. [2]

PR:             ports/81629 [1]
Submitted by:   KIMURA Yasuhiro <yasu@utahime.org> [1]
Obtained from:  ndtpd/01982 [2]
Approved by:    maintainer timeout

At Kris's request, back out the MACHINE_ARCH spelling correction until
after 5.4-RELEASE.

Assist getting more ports working on AMD64 by obeying the
Ports Collection documentation and use 'ARCH' rather than 'MACHINE_ARCH'.

Fix pkg-plist problem.

Submitted by:   KIMURA Yasuhiro <yasu@utahime.org>
Reviewed by:    rushani
Approved by:    maintainer (blanket)
Pointy hat to:  myself

Remove unnecessary patches.

Pointed out by: rushani
Forgotten by::  myself

Update to 4.1.3.

Noticed by:     rushani
Approved by:    maintainer (blanket)

Update to 4.1.1.
o Repocopy japanese/eb -> japanese/eb3 for safe keeping.
o Chase eb library version bump.
o Connect japanese/eb3 to japanese/Makefile

PR:             ports/74133
Submitted by:   KIMURA Yasuhiro <yasu@utahime.org>
Requested by:   Motoyuki Kasahara <m-kasahr@sra.co.jp> (author)
Repocopied by:  portmgr(marcus)

Apply a big libtool patch to allow porters to use the libtool installed by
the libtoolX ports instead of the one included with each port.  Ports that
set USE_LIBTOOL_VER=X will now use the ports version of libtool instead of
the included version.  To restore previous behavior, use the new macro,
USE_INC_LIBTOOL_VER.  Both macros accept the same argument: a libtool version.

For example, to use the ports version of libtool-1.5, add the following to
your Makefile:

USE_LIBTOOL_VER=        15

To use the included version of libtool with extra hacks provided by
libtool-1.5, add the following to your Makefile:

USE_INC_LIBTOOL_VER=    15

With this change, ports that had to add additional libtool hacks to prevent
.la files from being installed or to fix certain threading issues can now
delete those hacks (after appropriate testing, of course).

PR:             63944
Based on work by:eik and marcus
Approved by:    ade (autotools maintainer)
Tested by:      kris on pointyhat
Bound to be hidden problems:    You bet

Add missing files and directories

SIZEify (maintainer timeout)

Whoa there, boy, that's a mighty big commit y'all have there...

Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".

For ports-in-waiting:

        USE_LIBTOOL=YES         ->      USE_LIBTOOL_VER=13
        USE_AUTOCONF=YES        ->      USE_AUTOCONF_VER=213
        USE_AUTOMAKE=YES        ->      USE_AUTOMAKE_VER=14

Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.

BROKEN on ia64: Configure fails

Add USE_GETTEXT and bump PORTREVISION.

Submitted by:   trevor
Tested by:      bento

Now gettext 0.12.1 is gettext-old.

- Change maintainer's email

PR:             61702
Submitted by:   Kazu TAKAMUNE <takamune2004@yahoo.co.jp> (maintainer)

Update to 3.3.4.

PR:             ports/56276
Submitted by:   KIMURA Yasuhiro <yasu@utahime.org>
Approved by:    Kazu TAKAMUNE <takamune@avrl.mei.co.jp> (maintainer)

Bump the PORTREVISION for the ports directly affected by the gettext upgrade.

Prodded by:     kris

Chase the libintl.so shared lib version.

o New appendix of ruigigo-1.0.
o Fix checksum of LIST* by added archives.

PR:             ports/53611
Submitted by:   Kazu TAKAMUNE <takamune@avrl.mei.co.jp> (maintainer)

Update to 3.3.3.

PR:             ports/53279
Submitted by:   Kazu TAKAMUNE <takamune@avrl.mei.co.jp>

Update to 3.3.2.

PR:             ports/49043
Submitted by:   Kazu TAKAMUNE <takamune@avrl.mei.co.jp>

[0] Updates for the latest version 3.3.1
[1] Fix MASTER_SITES
[2] Don't use configure option '--enable-pthread' (backout last commit)
    because it breaks japanese/ndtpd and the pthread support of EB
    library     itself is still incomplete and experimental.
[3] Remove imported patch; files/patch-eb::match.c
[4] Add patch to use USE_LIBTOOL=yes; files/patch-configure
[5] Use configure option '--build=...'
[6] Use LOCALBASE instead of PREFIX for other installed packages
[7] Use DATADIR
[8] Don't be quiet at post-extract section (backout last commit)
[9] Sort @dirrm section of pkg-plist; generated by
    (cd /usr/local; find -ds share/eb -type d) | sed 's,^,@dirrm ,'

[4]-[7] were submitted by KATO Tsuguru <tkato@prontomail.com>.
Thanks, Kato-san.

PR:             ports/48840
Submitted by:   Kazu TAKAMUNE <takamune@avrl.mei.co.jp>

Update to 3.3+2(patches), and include a temporary patch (3.3.1 release
candidate, but not tested).

Approved by:    maintainer timeout (1week)

Avoid the use of tar(1)'s --no-same-owner flag, which is not supported
by version 1.11.2 or earlier.  This fixes installation on older
systems prior to 4.7-RELEASE.

PR:             ports/42143 (no patch)
Submitted by:   Kimura Fuyuki <fuyuki@hadaly.org>

De-pkg-comment.

Fix PERL dependencies for these ports (print/cups solves print/cups-base
and french/cups-base)

Noticed on: bento

- Update to 3.2.3.
- Add New appendix; genius2 (1.0).
- Extract appendices as root:wheel.

PR:             ports/41762
Submitted by:   Kazu TAKAMUNE <takamune@avrl.mei.co.jp> (MAINTAINER)

With the following changes:

- Since ftp.sra.co.jp occasionally returns a "502 Bad Gateway" error,
  add a decent mirror site ftp.eos.hokudai.ac.jp to MASTER_SITES.
- Update genius2 to 1.1.

Chase shlib rev of devel/gettext

Submitted by:   lots and lots
Pointy hat to:  ade

upgrade eb to 3.2.2
upgrade ndtpd to 3.1.3

PR:             40290
Submitted by:   maintainer

gettext upgrade uber-patch (stage 3)

- switch devel/gettext (0.11.1) on, installing full package
- flip devel/gettext-old (0.10.35) to installing only static binaries
  with a "-old" suffix -- gettext-old will have its deorbit burn
  sequence initiated just after 4.6-RELEASE
- fix up ports for the new world order

Reviewed by:    portmgr

Fix libintl/libiconv dependencies.

Update japanese/eb for the latest version 3.2.1 and
japanese/ndtpd for the latest version 3.1.1pl1.

PR:             ports/36004
Submitted by:   maintainer

Update the checksums of LIST/LIST-ja.    

Convert category japanese to new layout.  

Remove extra spaces    

Update to version ja-eb-2.3.8(patched).    

Update to 2.3.8.    

Rename INSTALLS_SHLIBS to INSTALLS_SHLIB.  (There was a typo in the   previous
commit message to bsd.port.mk, which said INSTALL_SHLIBS.  Boo.)    

Final round of the INSTALLS_SHLIBS=yes conversion. Few remaining ports with  
ldconfig in PLIST need personal consideration.