Fix build on 10.0.

- Fix build failure on braches with Clang older than 3.4.
- Fix build failure on head due to libiconv link error.
- Remove redundant patches.
- Add cflags and cflags_cc flags to build_mozc.py.

- Update to 2.6.0
- Update MASTER_SITES
- Add my LOCAL to MASTER_SITES
- Use USE_CSTD
- Use MAKE_CMD
- Reformat pkg-descr
- Update WWW
- Take maintainership
- Bump PORTREVISION for devel/protobuf shlib change

Changes:	https://code.google.com/p/protobuf/source/browse/trunk/CHANGES.txt

Fix mozc-server and mozc-client builds by directly depending on
lang/python so that the python command exists.

Use USES=python instead of USE_PYTHON_*.

Fix build on branches with GCC 4.2.1.

Spotted by:	ume

Fix MASTER_SITES.

Update Mozc to 1.15.1868.102.

Fix some non default LIB_DEPENDS

With hat:	portmgr

Modernize LIB_DEPENDS

With hat:	portmgr

Convert GMAKE to MAKE_CMD
Please note that lots of invocation of MAKE_CMD here are wrong as they do not
properly respect MAKE_ENV and friends

With hat:	portmgr

support stage.

support stage for mozc-el.

- Convert gmake,bzip2 to USES

Approved by:	portmgr

The FreeBSD x11@ and graphics team proudly presents
a zeising, kwm production, with help from dumbbell, bdrewery:

NEW XORG ON FREEBSD 9-STABLE AND 10-STABLE

This update switches over to use the new xorg stack by default on FreeBSD 9
and 10 stable, on osversions where vt(9) is available.
It is still possible to use the old stack by specifying WITHOUT_NEW_XORG in
/etc/make.conf .
FreeBSD 8-STABLE and released versions of FreeBSD still use
the old version.
A package repository with binary packages for new xorg will
be available soon.

This patch also contains updates of libxcb and related ports, pixman, as well

- Back out my change, since wg@ already fixed the port

Noticed by:	wg@

- Depend explicitly on lang/python at build time.

Reported by:	exp-run (PR 184591)
Approved by:	portmgr (blanket)

japanese/mozc-server: depends explicitly on "python" to build

Reported by:	exp-run (PR 184591)
Approved by:	portmgr (blanket)

Fix build of japanese/mozc-tools with native iconv. The error:
-----
  LINK(target) out_linux/Release/mozc_tool
/usr/bin/ld: cannot find -liconv
c++: error: linker command failed with exit code 1 (use -v to see
invocation)
gmake[2]: *** [out_linux/Release/mozc_tool] Error 1
-----

Notes:
1. The fix for japanese/mozc-tools (committed to japanese/mozc-server).
2. Do not bump PORTREVISION of japanese/mozc-tools since:
- it's a build failure;
- it should be treated while upgrading at each system along with other iconv
  changes.

Reported by:	Tomoaki AOKI <junchoon@dec.sakura.ne.jp>
Tested by:	Tomoaki AOKI <junchoon@dec.sakura.ne.jp>
Approved by:	portmgr (bapt, implicit)

- Fix build on 10.x.
- Add STAGEDIR support.

Add NO_STAGE all over the place in preparation for the staging support (cat:
japanese)

Add a patch to fix a build error "invalid DSO for symbol `libiconv_open'
definition".

- Remove MAKE_JOBS_SAFE variable

Approved by:	portmgr (bdrewery)

Do not define post-configure and pre-build target for mozc_el.

Spotted by:	HATANO Tomomi

- Update to 1.11.1502.102.  Changes include:

 * Fixes cursor movement issue on Emacs 24 (Issue 168)
 * Support numpad keys in mozc.el (Issue 170)
 * Support Emacs 24 in mozc.el (Issue 190)
 * Support surrounding text
 * Dictionary update

- Take maintainership.

Approved by:	daichi (maintainer)

Fix BUILD_DEPENDS in japanese/mozc-tool.

Spotted by:	ume

Update zipcode database to 20130628.

The FreeBSD x11 team proudly presents
an zeising, kwm, miwi, bapt, eadler production:

Xorg 7.7

Starring:
xserver 1.12.4 (new xorg only)
Mesa 8.0.4, including libGL, libGLU and dri (new xorg only)
libX11 1.5.0
libxcb 1.9
libdrm 2.4.42 (new xorg only)
freeglut 2.8.1
Also starring:
Updates to drivers and other libraries and utilities

Fix dependency.

Reported by:	miwi

Add a workaround when archivers/lha-ac is installed.

Spotted by:	me

 - Add Japan Post zip code dictionary.
 - Add LICENSE.
 - Fix malformed BUILD_DEPENDS and remove unnecessary dependencies.
   Use USE_* in a consistent manner.
 - Fix inconsistency toolchain usage in build_tools and the others.
   Hardcoded g++ was always used only for the former even if both gcc
   and clang were available.
 - Enable -Werror.
 - Fix SSP issue on i386 platform.
 - Let cpp(1) to replace LOCALBASE instead of patching and sed(1).
 - Use GYP_DEFINES for build variables instead of patching.
 - Separate the stages of configuration and build from each other.
 - Add options for localbase and openssl-related configuration to gyp
   instead of patching.
 - Fix makesum target.

- Convert USE_ICONV=yes to USES=iconv
- Change USE_GNOME=pkgconfig|gnomehack to USES=pathfix|pkgconfig while here

Reviewed by:	zeising

fixed a mozc-el build issue

Convert j* categories to USES=pkgconfig

enabled mozc_renderder, default on.

update to 1.10.1390.102

- Mark broken fails to build

Reported by:	pointyhat
Approved by:	maintainer feedback timeout 3 weeks+; portmgr

1: Upgrade protobuf to 2.5.0.
2: bump revision.
3: document UPDATING.

* Update the glib to 2.34.3 and gtk20 to 2.24.17 and gtk30 to 3.6.4 which
  are the latest stable releases.
* Update vala to the newest stable release 0.18.1, also update a few ports
  in the gtk/gnome stack.
* The c++ bindings ports for glib, atk, gconf, etc, have now USE_GNOME toggles.
* Remove pkg-config run depends from glib20 and freetype2. This doesn't
  eliminate pkg-config run dependency completely, a second phase is needed
  and is planned.
* Support for .:run. and .:build. for USE_GNOME components was added.
  Currently only libxml2 and libxslt support this mechanism.
* Updates of the telepathy stack and empathy.
* Trim makefile headers, convert ports to new options, trim off library
  versions for some ports.
* Fix other ports so they build with the new glib version.

Thanks to miwi and crees for helping out with some exp-runs.
Approved by:	portmgr (miwi & bapt)
Obtained from:	gnome team repo

fixed build error related to OPENSSL_LDFLAGS

PR:		ports/174406
Submitted by:	Mamoru Sakaue <sakaue.mamoru@mwghennndo.com>

build issue fixed

PR:		ports/172088
Submitted by:	Kazuyoshi Kamitsukasa <jou4.pub@gmail.com>

improved paralell build handling

fixed a FreeBSD 9.x build issue

fixed distinfo

update distinfo

Updated mozc relative ports to 1.6.1187.102
  - Google droped SCIM support from this version.
    japanese/scim-mozc will be removed in the future.

Fix typos in COMMENT

Approved by:	portmgr@ (implicit)

fixed mozc-el build fail

PR:		170131
Submitted by:	Seiji Ariga <freebsd@khaotic.net>

improve gtk/glib dependency

PR:		170037
Submitted by:	Seiji Ariga <freebsd@khaotic.net>

fixed a build error reported by pointy hat

corresponding to ibus update

improved dependency handling

- Fix the BROKEN flag
- Add LIB_DEPENDS
        devel/glib20
        x11-toolkits/gtk20
- Minor Makefile code fixes to make portlint happier
- Checked on Redports.org

PR:             ports/169364
Submitted by:   Masaki TAGAWA <masaki@club.kyutech.ac.jp>

- Mark BROKEN: does not build

Reported by:    pointyhat

- Convert USE_QT_VER=4 and QT_COMPONETS to USE_QT4

Review by:      bapt, David Naylor (kde team)

- update png to 1.5.10

update to mozc-1.5.1090.102.1

- fixed a build error
- improved fcitx-mozc build handling

Submitted by:   Zhihao Yuan <lichray@gmail.com>

fixed some path issues

Submitted by:   Zhihao Yuan <lichray@gmail.com>

Added fcitx-mozc support

PR:             167860, 166711
Submitted by:   Zhihao Yuan <lichray@gmail.com>

added a new patch of the openssl build handling

improved the openssl relative handling

Submitted by:   hrs

added a needed patch file

removed unneeded patch file

update to 1.5.1053.102

Update to Mozc 1.4.1033.102

Feature safe: yes

Update to 1.4.1003.102

Feature safe: yes

Fixed a build issue for 8.x

Simplified LOCALBASE replacement treatment

Update to 1.3.975.102

Update for ibus 1.4.0

added support for ibus-1.4.0

Requested by:   Buganini

fixed wrong packages name

Update mozc* to 1.3.931.102
  - update to 1.3.931.102
  - added mozc-el knob

- fixed a gcc 4.2.1 's namespace bug. Now mozc can build
  himself using the system's default gcc.
- removed the dependency for external gyp
- removed the gsed dependency
- removed the gnugrep dependency
- refined the mozc relative ports

Feature safe: yes
Submitted by:   hrs

Fixed typo.

Submitted by:   sanpei
Feature safe:   yes

Fixed a build error caused by a gcc 4.2.1's namespace bug.

Feature safe: yes

Fix a dependency issue pointed out by pointyhat

Feature safe: yes

Update to 1.3.911.102 including new features
  - New tool: Word Register
  - New tool: Hand Writing
  - New tool: Character Palette
  - Prediction feature
  - Correct suggestion feature
  - dictionary improvements

Feature safe: yes

Mark broken on powerpc as well as sparc64.  (In fact, on all the tier-2s.)

Hat:            portmgr

- Chase protobuf update

Reported by:    pointyhat
Pointy hat to:  vanilla

- Use canonical format for FreeBSD.org MAINTAINER addresses
- Remove obsolete MD5 checksum while I'm here

PR:             ports/152844
Submitted by:   sunpoet (myself)
Approved by:    miwi (with portmgr hat)

Update mozc to 0.13.523.102

Update mozc relative ports from 0.13.481.102 to 0.13.499.102

Reduce amount of patch, pointed by Google mozc dev team.

Add Debug build knob, WITH_DEBUG_CODE
Log files will be generated under ~/.mozc/

Update mozc to 0.13.481.102

Update mozc to 0.13.464.102

Added some mozc improvements for FreeBSD:
  - add signal treatments for FreeBSD to do correct
    termination process (remove socket file and lock file
    as closing time).
  - improve socket filename treatment

Now mozc_server does correct termination process. By this
improvements, you don't need mozc-additions anymore. But
commands included in mozc-additions is safe and useful for
start, stop, restart and launch mozc tools even now.

Update Mozc (Japanese Input Method Editor)
relative ports to 0.12.434.102 and fix build error on
recent 9-CURRENT.

Mark as broken on sparc64.

Hat:            portmgr

Add a new port: mozc-server
  - Mozc server for IBus, SCIM and others

Feature safe:   yes