japanese/mutt-devel/: Remove expired port:

2023-03-25 japanese/mutt-devel: Broken since 2019

japanese/mutt-devel: mark BROKEN everywhere, deprecate

It fails to build on FreeBSD 14 too and does not build with "recent"
(newer than 2019) versions of ssl

Remove WWW lines that have been moved into Makefiles

Approved by:	portmgr (implicit)

Move more WWW entries from pkg-descr files into Makefiles

The WWW: lines in the pkg-descr files of these ports where not at the
end of those files and have been missed in prior conversion runs.

Approved by:	portmgr (implicit)

japanese: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  ABURAYER Rewsirow <pcs51674@asciinet.or.jp>
  *  Aaron Dalton <aaron@FreeBSD.org>
  *  Akinori MUSHA aka knu <knu@idaemons.org>
  *  Akito FUJITA <fujita@zoo.ncl.omron.co.jp>
  *  Andrew Pantyukhin <infofarmer@FreeBSD.org>
  *  Daichi GOTO <daichi@FreeBSD.org>
  *  Daisuke Kawahara <kawahara@pine.kuee.kyoto-u.ac.jp>
  *  David O'Brien (obrien@cs.ucdavis.edu)
  *  Eiji-usagi-MATSUmoto <usagi@ruby.club.or.jp>
  *  FUJISHIMA Satsuki <sf@FreeBSD.org>
  *  Fumihiko Kimura <jfkimura@yahoo.co.jp>

*/*: Remove redundant '-[0-9]*' from CONFLICTS

The conflict checks compare the patterns first against the package
names without version (as reported by "pkg query "%n"), then - if
there was no match - agsinst the full package names including the
version (as reported by "pkg query "%n-%v").

Many CONFLICTS definitions used patterns like "bash-[0-9]*" to filter
for the bash package in any version. But that pattern is functionally
identical with just "bash".

Approved by:	portmgr (blanket)

japanese/mutt-devel: Add CPE information

Approved by:	portmgr (blanket)

Remove # $FreeBSD$ from Makefiles.

japanese/mutt-devel: MAILDIR_HEADER_CACHE implies IMAP_HEADER_CACHE

Before r316624 the port had

.if defined(WITH_MUTT_MAILDIR_HEADER_CACHE)
WITH_MUTT_IMAP_HEADER_CACHE=	yes
.endif

which was wrongly converted to the current construct.  It looks
like MAILDIR_HEADER_CACHE=on was meant to imply IMAP_HEADER_CACHE=on.

Mark BROKEN on FreeBSD 12 and 13

Reported by:	pkg-fallout
MFH:		2019Q2

dns/libidn: Update to 1.35

Bump 48 ports.
Previous update to 1.34 broke jabberd.

PR:		228048

Remove non-functional post-configure.

For ports that are marked BROKEN on armv6, and also fail to build on
armv7, mark them so.

This is part two of a multipart commit to bring armv7 ports to parity
with armv6.

Approved by:	portmgr (tier-2 blanket)
Obtained from:	lonesome.com -exp run

Mark some ports failing on armv6, for errors classified as "compiler_error".

While here, pet portlint.

Approved by:	portmgr (tier-2 blanket)

Extract do-patch into a separate script.

PR:		215761
Submitted by:	mat
Exp-run by:	antoine
Sponsored by:	Absolight
Differential Revision:	https://reviews.freebsd.org/D9029

Remove libiconv.so.3 compatibility link that was added in r374303 to
prevent massive PORTREVISION bumps.  Bump dependent ports that have not
been bumped since.

Mark various ports broken on aarch64.

Approved by:	portmgr (tier-2 blanket)

USE_BDB cleanup.

- USE_BDB=4x+ -> USES=bdb.
- USE_BDB=yes -> USES=bdb.
- USE_BDB=xx  -> USES=bdb:xx.

Other modernisations when I see them.

PR:		209183
Sponsored by:	Absolight

Remove ${PORTSDIR}/ from dependencies, categories h, i, j, k, and l.

With hat:	portmgr
Sponsored by:	Absolight

japanese/mutt-devel: document ncurses requirement (USES+=ncurses)

approved by:	infrastructure blanket

Use USES=fakeroot instead of NEED_ROOT=yes
while here convert to USES=autoreconf

Cleanup plist

dns/libidn:
- Add USES=libtool and bump dependent ports
- Add INSTALL_TARGET=install-strip
- Always install libidn-components.png because it is used by libidn.info
- Add -lintl to Libs.private instead of Libs in libidn.pc

Berkeley DB cleanup, remove versions 4.0 ... 4.7.
- Mk/bsd.database.mk rewrite, new default to db5.
- db6 is eligible by default only if installed on the system.
- Bump PORTREVISION of all ports that directly depend on BerkeleyDB or
  where USE_BDB is found in the port's directory
- Patch a few ports such that they will pick up or work with newer
  versions.
- Add UPDATING entry
- Drive-by format fix for pks
- Drop BerkeleyDB option from mail/popular for now, requires more work.
- Exp-run logs linked from the PR below.
- Ports that do not build (IGNORE, BROKEN, etc.) have pro-forma changes
  for new Berkeley DB, but are untested.

NOTE: please read UPDATING and the Wiki page before proceeding!

Announcement:	http://lists.freebsd.org/pipermail/freebsd-ports-announce/2014-August/000090.html
Wiki reference:	https://wiki.freebsd.org/Ports/BerkeleyDBCleanup
PR:		192690
Approved by:	portmgr (implicit, PORTREVISION bump on unstaged ports)

Rename the rather surprising number of japanese/ patch-xy patches
to reflect the files they modify.

Add DOCS to OPTIONS_DEFINE to ports that check for PORT_OPTIONS:MDOCS.

japanese/mutt-devel: Rev bump due to change in library dependencies

japanese/mutt-devel: Eliminate use of problematic libslang

PR:		ports/185122
Submitted by:	Oota Toshiya
Approved by:	maintainer (SHIOZAKI Takehiko)

- Fix build for recent FreeBSD 9.1, 10.0 or later.
- Convert to new LIB_DEPENDS syntax.
- Fix mis-adopting optionsNG.
- Fix inconsistency between declared LIB_DEPENDS and actual libdb
  version used on systems with multiple BDB versions installed.

PR:		184490
Submitted by:	Takehiko Shiozaki (maintainer)

While here,

- add LICENSE
- convert to staging to avoid mutt's doc/Makefile from messing with
  Muttrc
- convert USE_GMAKE to USES
- have two files' shebang lines fixed

Add NO_STAGE all over the place in preparation for the staging support (cat:
japanese)

Introduce ICONV_CONFIGURE_ARG variable defined at Uses/iconv.mk.
It's value is "--with-libiconv-prefix=/usr/local" for systems
before 100043 with ports libiconv and to use at systems post
100043 with base iconv it's value is "" (NULL).

Co-authors:	bapt, madpilot and bsam (me)

- Unbreak after autotools update

- Convert USE_ICONV=yes to USES=iconv
- Change USE_GNOME=pkgconfig|gnomehack to USES=pathfix|pkgconfig while here

Reviewed by:	zeising

Convert from USE_GETTEXT to USES= gettext

While here:
- Trim some headers
- Convert to new options framework

Update cyrus-sasl2 to 2.1.26.
This bumps shlib version of libsasl2.

- Remove ftp.parodius.com from MASTER_SITES due to its forthcoming
  closure. We thank Parodius for the hosting services they provided.

PR:             ports/169570
Submitted by:   Jeremy Chadwick <jdc@koitsu.org>
Approved by:    culot (mentor)

Update autoconf to 2.69 and automake to 1.12

PR:             166836
Tested by:      Multiple -exp runs (pav)

- Mark CONFLICTS with ja-mutt, mutt, mutt-devel, mutt-devel-lite, mutt-lite and
zh-mutt-devel
- Bump PORTREVISION for package change

- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead

PR:             157936
Submitted by:   myself
Exp-runs by:    pav
Approved by:    pav

- Bump PORTREVISION to chase the update of dns/libidn

- Remove unnecessary PKGNAMEPREFIX declaration
- Remove obsolete MD5 checksum while I'm here

PR:             ports/153634
Submitted by:   sunpoet (myself)
Approved by:    pav (with portmgr hat)

- Update to 1.5.21 [1]
- Make use of grouping rules for DISTFILES and MASTER_SITES
- Use PKGNAMESUFFIX to make portlint happier
- Add OPTIONS

PR:             ports/153234 [1]
Submitted by:   SHIOZAKI Takehiko <st_AT_be_DOT_to> [1]

Sync to new bsd.autotools.mk

Punt autoconf267->autoconf268

Round one migration of ports from automake{19,110} to automake111

Autotools update.   Read ports/UPDATING 20100915 for details.

Approved by:    portmgr (for Mk/bsd.port.mk part)
Tested by:      Multiple -exp runs

Bounce PORTREVISION for gettext-related ports.  Have fun, ya'll.

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

- update to jpeg-8

Conversion from (now defunct) autoconf-2.61 to autoconf-2.62

Tested by:      exp build run (erwin)

Fix installation of documentation (bump PORTREVISION)

PR:             ports/124663
Submitted by:   maintainer

Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)

Update to the autotools new world order.

Tested by:      numerous package build runs
Approved by:    portmgr
Thanks to:      des, kris, linimon, pav

- My editor spammed the Makefile last time, fix weird error. It seems to be
  a bug in ee(1)

Reported by:    Dan Langille <dan@langille.org>

- Remove support for deprecated cyrus-sasl and add support for cyrus-sasl2
- Bump PORTREVISION

PR:             ports/111567
Submitted by:   SHIOZAKI Takehiko <st@be.to> (maintainer)
Inspired by:    gabor

- Add fix for recent IMAP buffer overflow vulnerability.

PR:             ports/99698
Submitted by:   shaun (me)
Approved by:    SHIOZAKI Takehiko <st@be.to> (maintainer),
                ahze (mentor)
Security:       VuXML d2a43243-087b-11db-bc36-0008743bf21a

Remove USE_REINPLACE from categories starting with a J

SHA256ify

Approved by:    krion@

Mass-conversion to the USE_AUTOTOOLS New World Order.  The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.

Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.

Preliminary documentation can be found at:
        http://people.FreeBSD.org/~ade/autotools.txt

which is in the process of being SGMLized before introduction into the
Porters Handbook.

Light blue touch-paper.  Run.

Move IDN related ports from devel to dns category:

  devel/libidn -> dns/libidn
  devel/p5-Net-LibIDN -> dns/p5-Net-LibIDN

Approved by:    both maintainers
Repocopy by:    marcus

japanese/mutt-devel pkg-plist error fix

        - Fixed the pkg-plist error.
        - Updated the header cache patcg to the latest one.

PR:             ports/75290
Submitted by:   SHIOZAKI Takehiko <st@be.to>

Chase libraries for new devel/libidn version.

o Added -D_DONT_USE_CTYPE_INLINE_ to CFLAGS not to use inlined wcwidth().
o Cleaned up pkg-plist for NOPORTDOCS.
o Added the latest Japanese documents.
o Also added the following knobs.
        WITH_MUTT_HEADER_CACHE
        WITH_MUTT_IDN
        MUTT_CONFIGURE_ARGS

PR:             ports-jp/14983[1], ports/71329[2]
Submitted by:   KOMATSU Shinichiro <koma2@ms.u-tokyo.ac.jp>[1]
                SHIOZAKI Takehiko <st@be.to> (maintainer)[2]
Reviewed by:    Kimura Fuyuki <fuyuki@hadaly.org>
                vs

Sync with new bsd.autotools.mk

- WITHOUT_NLS-knob [1]
- Register CONFLICTS [2]
- Bring PORTNAME in line with mail/mutt-devel ("mutt" -> "mutt-devel") [2]

PR:             ports/64836 [1]
Submitted by:   Katsura Matsumoto
Approved by:    SHIOZAKI Takehiko (maintainer) [1,2]

- Use USE_ICONV knob

Approved by:    portmgr

Whoa there, boy, that's a mighty big commit y'all have there...

Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".

For ports-in-waiting:

        USE_LIBTOOL=YES         ->      USE_LIBTOOL_VER=13
        USE_AUTOCONF=YES        ->      USE_AUTOCONF_VER=213
        USE_AUTOMAKE=YES        ->      USE_AUTOMAKE_VER=14

Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.

Unbreak by fixing bug introduced in rev 1.45, which attempted to
correct handling of LDFLAGS but instead removed it from CONFIGURE_ENV
completely.

o Update to 1.5.6.
o Change MAINTAINERship to submitter.

PR:             ports-jp/14599
Submitted by:   SHIOZAKI Takehiko <st@be.to>
Approved by:    IWASHITA Yoji <iwashita@cqmail.net> (maintainer)

Add USE_GETTEXT and bump PORTREVISION.

Submitted by:   trevor
Tested by:      bento

Now gettext 0.12.1 is gettext-old.

- don't clobber any given LDFLAGS
  resolves conflitcs with bsd.openssl.mk
(maintainter contacted, no response yet)
Approved by:    marcus

Bump the PORTREVISION for the ports directly affected by the gettext upgrade.

Prodded by:     kris

Chase the libintl.so shared lib version.

Update to 1.5.4.

PR:             ports/50464
Submitted by:   SHIOZAKI Takehiko <takehiko@fdiary.net>
Approved by:    IWASHITA Yoji <iwashita@cqmail.net> (maintainer)

De-pkg-comment.

Update to 1.5.3 and change MAINTAINER's mail address.

PR:             ports/48282
Submitted by:   IWASHITA Yoji <iwashita@cqmail.net> (maintainer)

Now that AUTOCONF and friends contain slashes in them, use a separator
other than the slash for s///.  This fixes the build.

Use REINPLACE_CMD instead of PERL while I'm here.

Chase shlib rev of devel/gettext

Submitted by:   lots and lots
Pointy hat to:  ade

moving saslv1 includes files to make it easier to add saslv2

PR:             ports/40288
Submitted by:   Mathieu Arnold <m@absolight.net>
Approved by:    knu

Update to 1.5.1.j1

PR:             39691
Submitted by:   maintainer

Update to 1.3.99.j1.

PR:             ports/38277
Submitted by:   IWASHITA Yoji <shuna@pop16.odn.ne.jp> (MAINTAINER)

gettext upgrade uber-patch (stage 3)

- switch devel/gettext (0.11.1) on, installing full package
- flip devel/gettext-old (0.10.35) to installing only static binaries
  with a "-old" suffix -- gettext-old will have its deorbit burn
  sequence initiated just after 4.6-RELEASE
- fix up ports for the new world order

Reviewed by:    portmgr

Update to 1.3.28.j1

PR:             36637
Submitted by:   maintainer

Iconv cleanup, stage 2a: remove patches that only replacing <iconv.h> with
<giconv.h> or -liconv with -lgiconv.

Bump PORTREVISION to reflect the (lib)iconv upgrade.

Iconv cleanup, stage 1b: correct {BUILD,LIB,RUN}_DEPENDS of all ports that need
libiconv.

Stage 1 of gettext update.

Move gettext (0.10.35) with gettext-old
Update gettext from gettext-devel (0.10.40)
Remove gettext-devel
Fix dependencies

Stage 2 will involve upgraded gettext to 0.11 and fixing issues
Stage 3 involves a de-orbit burn sequence for gettext-old

Reviewed by:    portmgr

Update to 1.3.27.j2    

o update to 1.3.25.   o add FETCH_BEFORE_ARGS=-A for broken httpd.    

Update to 1.3.24    

o USE_AUTO* police sweep   - Don't hardcode, use
{ACLOCAL,AUTO{CONF,HEADER,MAKE}}    

Update to 1.3.23    

Update to 1.3.22.1.j0.    

Update 1.3.20.ja0.    

Update to latest version (1.3.19)   Remove unneeded patches   Add patch-ah for
iconv.m4   Update pkg-plist with new locales    

upgrade to ja-mutt-1.3.18.j0    

Update to 1.3.17.    

o update to 1.3.16.j0.   o update Japanese manual.   o add Japanese message
catalog.    

update to 1.3.14i-ja0.   move WWW.