textproc/uim: Update to 1.9.0

- Add RUN_DEPENDS on japanese/skk-jisyo
- Fix default SKK-JISYO.L dictionary file path setting for SKK input method
- Rename textproc/uim-gtk port to textproc/uim-gtk2
- Add textproc/uim-qt6 port of Qt6 input method module
- Bump PORTREVISION of the ports that depend on textproc/uim port

textproc/uim: Update to the snapshot on 2024-03-06

Bump PORTREVISION of the ports that depend on textproc/uim port.

textproc/uim: Update to the snapshot on 2022-09-27

Bump PORTREVISION of the ports that depend on textproc/uim port.

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

japanese: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  ABURAYER Rewsirow <pcs51674@asciinet.or.jp>
  *  Aaron Dalton <aaron@FreeBSD.org>
  *  Akinori MUSHA aka knu <knu@idaemons.org>
  *  Akito FUJITA <fujita@zoo.ncl.omron.co.jp>
  *  Andrew Pantyukhin <infofarmer@FreeBSD.org>
  *  Daichi GOTO <daichi@FreeBSD.org>
  *  Daisuke Kawahara <kawahara@pine.kuee.kyoto-u.ac.jp>
  *  David O'Brien (obrien@cs.ucdavis.edu)
  *  Eiji-usagi-MATSUmoto <usagi@ruby.club.or.jp>
  *  FUJISHIMA Satsuki <sf@FreeBSD.org>
  *  Fumihiko Kimura <jfkimura@yahoo.co.jp>

textproc/uim: Update to the snapshot on 2022-03-18

- Update slave ports of textproc/uim
- Bump PORTREVISION for the ports that depend on textproc/uim

japanese/scim-uim: Update WWW

textproc/uim: Update to the snapshot on 2021-01-04.

- Use GTK+ 3 as default GUI toolkit.
- textproc/uim-qt5 installs KDE Plasma 5 applet.
- Bump PORTREVISION of ports that depends on textproc/uim

Remove # $FreeBSD$ from Makefiles.

Convert to UCL & cleanup pkg-message (categories h-k)

Chase textproc/uim update to 1.8.8.

Remove BROKEN_FreeBSD_9

Approved by:	portmgr (blanket)

- Mark broken on FreeBSD 9.x:

/usr/local/lib: file not recognized: File format not recognized

Approved by:	portmgr blanket

Remove ${PORTSDIR}/ from dependencies, categories h, i, j, k, and l.

With hat:	portmgr
Sponsored by:	Absolight

By default libtool replaces -export-symbols <file> with -retain-symbols-file
<file> on ELF systems, but this doesn't really do what -export-symbols is
meant to do.  On GNU ELF systems it converts <file> to a simple version
script first and then uses -version-script instead of -retain-symbols-file.
Let USES=libtool patch libtool scripts to do this on all systems with GNU
ld(1).

Bump PORTREVISION on all ports where the build log contains -export-symbols.

audio/calf: This port builds a module that now exports only one function,
but it also builds a number of executables that link to this module and
expect to see other functions.  Because it's already a bit dodgy to link to
a module (libtool warns about this) let the module continue to export only
one function and instead build an ordinary library from the same source that
the executables can link to.  Fix a number of other issues in the same

Cleanup plist

textproc/scim:
- Add USES=libtool and bump dependent ports
- Add INSTALL_TARGET=install-strip

- Convert texproc/uim and friends to USES=libtool, drop .la files
- Bump ports dependent on uim as some .so versions have changed
- While here, convert some USE_BZIP2 to USES=tar:bzip2

Approved by:	portmgr blanket

- Convert to USES=libtool.
- New LIB_DEPENDS syntax.
- Remove references to PTHREAD_CFLAGS and PTHREAD_LIBS.
- Staging.

Add NO_STAGE all over the place in preparation for the staging support (cat:
japanese)

Add an explicit dependency on pkgconf

Approved by:	portmgr (bapt)

- Convert USE_ICONV=yes to USES=iconv
- Change USE_GNOME=pkgconfig|gnomehack to USES=pathfix|pkgconfig while here

Reviewed by:	zeising

- Convert all remaining instances of BUILD_DEPENDS=${RUN_DEPENDS} or
  RUN_DEPENDS=${BUILD_DEPENDS} to use := which portlint has warned
  about for a while.

PR:             ports/168208
Approved by:    portmgr (miwi)

- update png to 1.5.10

- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead

PR:             157936
Submitted by:   myself
Exp-runs by:    pav
Approved by:    pav

Sync with shared library version bump of textproc/uim.

- Get Rid MD5 support

With hat:       portmgr (myself)

Sync with shared library version bump of textproc/uim.

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

- update to jpeg-8

- Switch SourceForge ports to the new File Release System: categories starting
with H,I,J,K,L

- bump all port that indirectly depends on libjpeg and have not yet been bumped
or updated
Requested by:   edwin

- Remove conditional checks for FreeBSD 5.x and older

Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)

Update to 0.2.0.

PR:             ports/123730
Submitted by:   Seiya Yanagita <s_yanagita@ybb.ne.jp> (maintainer)

Fix build with the latest uim.

Reported by:       pointyhat via pav

- Remove unneeded dependency from gtk12/gtk20 [1]
- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Remove X11BASE support in favor of LOCALBASE or PREFIX
- Use USE_LDCONFIG instead of INSTALLS_SHLIB
- Remove unneeded USE_GCC 3.4+

Thanks to all Helpers:
        Dmitry Marakasov, Chess Griffin, beech@, dinoex, rafan, gahr,
        ehaupt, nox, itetcu, flz, pav

PR:             116263
Tested on:      pointyhat
Approved by:    portmgr (pav)

- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Bump PORTREVISION

Approved by:    portmgr (xorg cleanup)

Fix type: USE_X_LIB --> USE_XLIB

PR:             ports/116008
Submitted by:   Seiya Yanagita s_yanagita at ybb.ne.jp
Reported by:    infofarmer

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

- Unmark BROKEN by removing obsoleted codes. [1]
- Fix plist after upgrading scim to 1.4.5.

PR:             ports/111005 [1]
Submitted by:   Seiya Yanagita<s_yanagita__at__ybb.ne.jp> (maintainer)

BROKEN: Does not compile

Use libtool15 port instead of included version to avoid objformat a.out botch

Chase the GNOME X11BASE to LOCALBASE move, and fix the build with the
new freetype2 where needed.

Submitted by:   mezz, ahze, pav, and many others
Approved by:    portmgr (implicit, kris)

Conversion to a single libtool environment.

Approved by:    portmgr (kris)

- Fix build with libtool 1.5.22_1

Reported by:    pointyhat via kris

- Unbreak by fixing dependency to textproc/uim

Submitted by:   Seiya Yanagita <s_yanagita@ybb.ne.jp> (maintainer)
PR:             ports/92529

SHA256ify

Approved by:    krion@

Replace ugly "@unexec rmdir %D... 2>/dev/null || true" with @dirrmtry

Approved by:    krion@
PR:             ports/88711 (related)

BROKEN: Broken dependency

Move japanese/uim port to textproc category after repocopy.

PR:             ports/89725
Submitted by:   nobutaka

Mass-conversion to the USE_AUTOTOOLS New World Order.  The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.

Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.

Preliminary documentation can be found at:
        http://people.FreeBSD.org/~ade/autotools.txt

which is in the process of being SGMLized before introduction into the
Porters Handbook.

Light blue touch-paper.  Run.

Bump PORTREVISION to chase the glib20 shared library update.

SCIM updated to 1.4.2.
o Update scim 1.4.2. [1]
o Update skim 1.4.2. [1]
o Update scim-uim 0.1.4. [2]
o Bump PORTREVISION in scim related ports.

Approved by:    Jie Gao <gaoj@cpsc.ucalgary.ca> [1]
Approved by:    Seiya Yanagita <s_yanagita@ybb.ne.jp> [2]

o Update to 1.4.0.
o Chase bump libversion to slave ports .

PR:             ports/84247
Submitted by:   Jie Gao <gaoj@cpsc.ucalgary.ca> (maintainer)

o Update
  ports/textproc/scim 1.2.0 --> 1.2.2
  ports/textproc/skim 1.2.0 --> 1.2.2
o Chase scim's library bump.

PR:             ports/80848
Submitted by:   Jie Gao <gaoj@cpsc.ucalgary.ca> (maintainer)

Bump PORTREVISION to chase the glib20 shared lib version change.

Correct pkg-plist.

Submitted by:   maintainer

BROKEN: Incorrect pkg-plist

Add scim-uim, a SCIM IMEngine module using UIM input method library.

PR:             ports/74064
Submitted by:   Seiya Yanagita <s_yanagita@ybb.ne.jp>